lkml.org 
[lkml]   [2020]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] phy: phylink: Fix CuSFP issue in phylink
> > Do you have the Marvell PHY driver either built-in or available as a
> > module? I suspect the problem is you don't. You will need the Marvell
> > PHY driver to correctly drive the PHY, you can't rely on the fallback
> > driver for SFPs.
> Correct. I was using the generic driver and that does clearly not
> work. After including the Marvell driver the callback to the validate
> function happens as expected. Thanks for the support.

Hi Russell

Maybe we should have MDIO_I2C driver select the Marvell PHY driver?

Andrew

\
 
 \ /
  Last update: 2020-11-17 15:10    [W:0.043 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site