lkml.org 
[lkml]   [2020]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v6 3/5] net: ax88796c: ASIX AX88796C SPI Ethernet Adapter Driver
Date
It was <2020-11-13 pią 12:35>, when Jakub Kicinski wrote:
> On Thu, 12 Nov 2020 12:51:04 +0100 Łukasz Stelmach wrote:
>> ASIX AX88796[1] is a versatile ethernet adapter chip, that can be
>> connected to a CPU with a 8/16-bit bus or with an SPI. This driver
>> supports SPI connection.
>>
>> The driver has been ported from the vendor kernel for ARTIK5[2]
>> boards. Several changes were made to adapt it to the current kernel
>> which include:
>>
>> + updated DT configuration,
>> + clock configuration moved to DT,
>> + new timer, ethtool and gpio APIs,
>> + dev_* instead of pr_* and custom printk() wrappers,
>> + removed awkward vendor power managemtn.
>> + introduced ethtool tunable to control SPI compression
>>
>> [1]
>> https://protect2.fireeye.com/v1/url?k=96d0e769-c94bde24-96d16c26-0cc47aa8f5ba-09ef5c65a6139da8&q=1&e=472aea40-d885-45aa-bc04-66e70be69a4c&u=https%3A%2F%2Fwww.asix.com.tw%2Fproducts.php%3Fop%3DpItemdetail%26PItemID%3D104%3B65%3B86%26PLine%3D65
>> [2]
>> https://protect2.fireeye.com/v1/url?k=3834941b-67afad56-38351f54-0cc47aa8f5ba-067355624cc12466&q=1&e=472aea40-d885-45aa-bc04-66e70be69a4c&u=https%3A%2F%2Fgit.tizen.org%2Fcgit%2Fprofile%2Fcommon%2Fplatform%2Fkernel%2Flinux-3.10-artik%2F
>>
>> The other ax88796 driver is for NE2000 compatible AX88796L chip. These
>> chips are not compatible. Hence, two separate drivers are required.
>>
>> Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
>
> Please make sure the new code builds cleanly with W=1 C=1
>
> ../drivers/net/ethernet/asix/ax88796c_ioctl.c:221:19: warning: initialized field overwritten [-Woverride-init]
> 221 | .get_msglevel = ax88796c_ethtool_getmsglevel,
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
> ../drivers/net/ethernet/asix/ax88796c_ioctl.c:221:19: note: (near initialization for ‘ax88796c_ethtool_ops.get_msglevel’)
> ../drivers/net/ethernet/asix/ax88796c_ioctl.c:222:19: warning: initialized field overwritten [-Woverride-init]
> 222 | .set_msglevel = ax88796c_ethtool_setmsglevel,
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
> ../drivers/net/ethernet/asix/ax88796c_ioctl.c:222:19: note: (near initialization for ‘ax88796c_ethtool_ops.set_msglevel’)
> In file included from ../drivers/net/ethernet/asix/ax88796c_main.h:15,
> from ../drivers/net/ethernet/asix/ax88796c_ioctl.c:16:
> ../drivers/net/ethernet/asix/ax88796c_spi.h:25:17: warning: ‘tx_cmd_buf’ defined but not used [-Wunused-const-variable=]
> 25 | static const u8 tx_cmd_buf[4] = {AX_SPICMD_WRITE_TXQ, 0xFF, 0xFF, 0xFF};
> | ^~~~~~~~~~

I fixed the problems reported by W=1, but I am afraid I can't do
anything about C=1. sparse is is reporting

[...]
./include/linux/atomic-fallback.h:266:16: error: Expected ; at end ofdeclaration
./include/linux/atomic-fallback.h:266:16: error: got ret
./include/linux/atomic-fallback.h:267:1: error: Expected ; at the end of type declaration
./include/linux/atomic-fallback.h:267:1: error: too many errors
Segmentation fault

in the headers and gets killed.

--
Łukasz Stelmach
Samsung R&D Institute Poland
Samsung Electronics
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-11-16 16:36    [W:0.075 / U:0.840 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site