lkml.org 
[lkml]   [2020]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/3] media: dt-bindings: media: i2c: Add bindings for TW9900
On Fri, 13 Nov 2020 14:44:16 +0100, Maxime Chevallier wrote:
> The Techwell TW9900 is a video decoder supporting multiple input
> standards, such as PAL, NTSC and SECAM, and outputs a BT.656 video
> signal.
>
> It's designed to be low-power, posesses some features such as a
> programmable comb-filter, and automatic input standard detection.
>
> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
> ---
> v1->v2: Fix the example not compiling
>
> .../devicetree/bindings/media/i2c/tw9900.yaml | 60 +++++++++++++++++++
> 1 file changed, 60 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/tw9900.yaml
>


My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/media/i2c/tw9900.example.dt.yaml: tw9900@44: 'reset-gpio' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/media/i2c/tw9900.yaml


See https://patchwork.ozlabs.org/patch/1399805

The base for the patch is generally the last rc1. Any dependencies
should be noted.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

\
 
 \ /
  Last update: 2020-11-16 16:09    [W:0.187 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site