lkml.org 
[lkml]   [2020]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 08/27] parport: fix a kernel-doc markup
Date
The kernel-doc markup inside share.c is actually for
__parport_register_driver. The actual goal seems to be
to document parport_register_driver().

So, fix the existing markup and add a new one.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
drivers/parport/share.c | 2 +-
include/linux/parport.h | 31 +++++++++++++++++++++++++++++++
2 files changed, 32 insertions(+), 1 deletion(-)

diff --git a/drivers/parport/share.c b/drivers/parport/share.c
index 7fec4fefe151..62f8407923d4 100644
--- a/drivers/parport/share.c
+++ b/drivers/parport/share.c
@@ -226,41 +226,41 @@ static int port_check(struct device *dev, void *dev_drv)

/* only send ports, do not send other devices connected to bus */
if (is_parport(dev))
drv->match_port(to_parport_dev(dev));
return 0;
}

/*
* Iterates through all the devices connected to the bus and return 1
* if the device is a parallel port.
*/

static int port_detect(struct device *dev, void *dev_drv)
{
if (is_parport(dev))
return 1;
return 0;
}

/**
- * parport_register_driver - register a parallel port device driver
+ * __parport_register_driver - register a parallel port device driver
* @drv: structure describing the driver
* @owner: owner module of drv
* @mod_name: module name string
*
* This can be called by a parallel port device driver in order
* to receive notifications about ports being found in the
* system, as well as ports no longer available.
*
* If devmodel is true then the new device model is used
* for registration.
*
* The @drv structure is allocated by the caller and must not be
* deallocated until after calling parport_unregister_driver().
*
* If using the non device model:
* The driver's attach() function may block. The port that
* attach() is given will be valid for the duration of the
* callback, but if the driver wants to take a copy of the
* pointer it must call parport_get_port() to do so. Calling
* parport_register_device() on that port will do this for you.
diff --git a/include/linux/parport.h b/include/linux/parport.h
index 1fb508c19e83..f981f794c850 100644
--- a/include/linux/parport.h
+++ b/include/linux/parport.h
@@ -280,40 +280,71 @@ struct parport *parport_register_port(unsigned long base, int irq, int dma,

/* Once a registered port is ready for high-level drivers to use, the
low-level driver that registered it should announce it. This will
call the high-level drivers' attach() functions (after things like
determining the IEEE 1284.3 topology of the port and collecting
DeviceIDs). */
void parport_announce_port (struct parport *port);

/* Unregister a port. */
extern void parport_remove_port(struct parport *port);

/* Register a new high-level driver. */

int __must_check __parport_register_driver(struct parport_driver *,
struct module *,
const char *mod_name);
/*
* parport_register_driver must be a macro so that KBUILD_MODNAME can
* be expanded
*/
+
+/**
+ * parport_register_driver - register a parallel port device driver
+ * @driver: structure describing the driver
+ *
+ * This can be called by a parallel port device driver in order
+ * to receive notifications about ports being found in the
+ * system, as well as ports no longer available.
+ *
+ * If devmodel is true then the new device model is used
+ * for registration.
+ *
+ * The @driver structure is allocated by the caller and must not be
+ * deallocated until after calling parport_unregister_driver().
+ *
+ * If using the non device model:
+ * The driver's attach() function may block. The port that
+ * attach() is given will be valid for the duration of the
+ * callback, but if the driver wants to take a copy of the
+ * pointer it must call parport_get_port() to do so. Calling
+ * parport_register_device() on that port will do this for you.
+ *
+ * The driver's detach() function may block. The port that
+ * detach() is given will be valid for the duration of the
+ * callback, but if the driver wants to take a copy of the
+ * pointer it must call parport_get_port() to do so.
+ *
+ *
+ * Returns 0 on success. The non device model will always succeeds.
+ * but the new device model can fail and will return the error code.
+ **/
#define parport_register_driver(driver) \
__parport_register_driver(driver, THIS_MODULE, KBUILD_MODNAME)

/* Unregister a high-level driver. */
extern void parport_unregister_driver (struct parport_driver *);
void parport_unregister_driver(struct parport_driver *);

/* If parport_register_driver doesn't fit your needs, perhaps
* parport_find_xxx does. */
extern struct parport *parport_find_number (int);
extern struct parport *parport_find_base (unsigned long);

/* generic irq handler, if it suits your needs */
extern irqreturn_t parport_irq_handler(int irq, void *dev_id);

/* Reference counting for ports. */
extern struct parport *parport_get_port (struct parport *);
extern void parport_put_port (struct parport *);
void parport_del_port(struct parport *);

--
2.28.0
\
 
 \ /
  Last update: 2020-11-16 11:20    [W:0.321 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site