lkml.org 
[lkml]   [2020]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] bus: mhi: core: Add support MHI EE FP for download firmware
On Mon, Nov 02, 2020 at 08:34:14AM -0800, Bhaumik Bhatt wrote:
> On 2020-11-02 04:27, carl.yin@quectel.com wrote:
> > From: "carl.yin" <carl.yin@quectel.com>
> >
> > MHI wwan modems support download firmware to nand or emmc
> > by firehose protocol, process as next:
> > 1. modem boot up and enter EE AMSS, create DIAG channels (4, 5) device
> > 2. user space tool send EDL command via DIAG channel,
> > then modem enter EE EDL
> > 3. boot.c download 'flash programmer image' via BHI interface
> > 4. modem enter EE FP, and create EDL channels (34, 35) device
> > 5. user space tool download 'firmware image' to modem via EDL channels
> > by firehose protocol
> >
> > Signed-off-by: carl.yin <carl.yin@quectel.com>
> > ---
> > drivers/bus/mhi/core/init.c | 2 ++
> > drivers/bus/mhi/core/internal.h | 1 +
> > drivers/bus/mhi/core/main.c | 5 ++++-
> > drivers/bus/mhi/core/pm.c | 13 ++++++++++++-
> > include/linux/mhi.h | 4 +++-
> > 5 files changed, 22 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
> > index ac4aa5c..e34616b 100644
> > --- a/drivers/bus/mhi/core/init.c
> > +++ b/drivers/bus/mhi/core/init.c
> > @@ -26,6 +26,7 @@ const char * const mhi_ee_str[MHI_EE_MAX] = {
> > [MHI_EE_WFW] = "WFW",
> > [MHI_EE_PTHRU] = "PASS THRU",
> > [MHI_EE_EDL] = "EDL",
> > + [MHI_EE_FP] = "FLASH PROGRAMMER",
> > [MHI_EE_DISABLE_TRANSITION] = "DISABLE",
> > [MHI_EE_NOT_SUPPORTED] = "NOT SUPPORTED",
> > };
> > @@ -35,6 +36,7 @@ const char * const
> > dev_state_tran_str[DEV_ST_TRANSITION_MAX] = {
> > [DEV_ST_TRANSITION_READY] = "READY",
> > [DEV_ST_TRANSITION_SBL] = "SBL",
> > [DEV_ST_TRANSITION_MISSION_MODE] = "MISSION_MODE",
> > + [DEV_ST_TRANSITION_FP] = "FLASH_PROGRAMMER",
> > [DEV_ST_TRANSITION_SYS_ERR] = "SYS_ERR",
> > [DEV_ST_TRANSITION_DISABLE] = "DISABLE",
> > };
> > diff --git a/drivers/bus/mhi/core/internal.h
> > b/drivers/bus/mhi/core/internal.h
> > index 4abf0cf..6ae897a 100644
> > --- a/drivers/bus/mhi/core/internal.h
> > +++ b/drivers/bus/mhi/core/internal.h
> > @@ -386,6 +386,7 @@ enum dev_st_transition {
> > DEV_ST_TRANSITION_READY,
> > DEV_ST_TRANSITION_SBL,
> > DEV_ST_TRANSITION_MISSION_MODE,
> > + DEV_ST_TRANSITION_FP,
> > DEV_ST_TRANSITION_SYS_ERR,
> > DEV_ST_TRANSITION_DISABLE,
> > DEV_ST_TRANSITION_MAX,
> > diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
> > index 3950792..a1e1561 100644
> > --- a/drivers/bus/mhi/core/main.c
> > +++ b/drivers/bus/mhi/core/main.c
> > @@ -422,7 +422,7 @@ irqreturn_t mhi_intvec_threaded_handler(int
> > irq_number, void *priv)
> > wake_up_all(&mhi_cntrl->state_event);
> >
> > /* For fatal errors, we let controller decide next step */
> > - if (MHI_IN_PBL(ee))
> > + if (MHI_IN_PBL(mhi_cntrl->ee))
> Let's please have this as a separate patch with a fixes tag, as it fixes a
> pre-existing bug. I am sure Mani would want this.

Yes. It is not recommended to club changes like this onto a single patch.

Thanks,
Mani

> > mhi_cntrl->status_cb(mhi_cntrl, MHI_CB_FATAL_ERROR);
> > else
> > mhi_pm_sys_err_handler(mhi_cntrl);
> > @@ -782,6 +782,9 @@ int mhi_process_ctrl_ev_ring(struct mhi_controller
> > *mhi_cntrl,
> > case MHI_EE_SBL:
> > st = DEV_ST_TRANSITION_SBL;
> > break;
> > + case MHI_EE_FP:
> > + st = DEV_ST_TRANSITION_FP;
> > + break;
> When do you get this EE event on the control event ring? Does it come by
> after you
> have detected EE as FP from mhi_sync_power_up() and move to ready and then
> M0?
> > case MHI_EE_WFW:
> > case MHI_EE_AMSS:
> > st = DEV_ST_TRANSITION_MISSION_MODE;
> > diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
> > index 3de7b16..2d68812 100644
> > --- a/drivers/bus/mhi/core/pm.c
> > +++ b/drivers/bus/mhi/core/pm.c
> > @@ -658,6 +658,12 @@ void mhi_pm_st_worker(struct work_struct *work)
> > case DEV_ST_TRANSITION_MISSION_MODE:
> > mhi_pm_mission_mode_transition(mhi_cntrl);
> > break;
> > + case DEV_ST_TRANSITION_FP:
> > + write_lock_irq(&mhi_cntrl->pm_lock);
> > + mhi_cntrl->ee = MHI_EE_FP;
> > + write_unlock_irq(&mhi_cntrl->pm_lock);
> > + mhi_create_devices(mhi_cntrl);
> > + break;
> > case DEV_ST_TRANSITION_READY:
> > mhi_ready_state_transition(mhi_cntrl);
> > break;
> > @@ -1077,10 +1083,15 @@ int mhi_sync_power_up(struct mhi_controller
> > *mhi_cntrl)
> >
> > wait_event_timeout(mhi_cntrl->state_event,
> > MHI_IN_MISSION_MODE(mhi_cntrl->ee) ||
> > + mhi_cntrl->ee == MHI_EE_FP ||
> > MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state),
> > msecs_to_jiffies(mhi_cntrl->timeout_ms));
> >
> > - ret = (MHI_IN_MISSION_MODE(mhi_cntrl->ee)) ? 0 : -ETIMEDOUT;
> > + if (mhi_cntrl->ee == MHI_EE_FP)
> > + mhi_queue_state_transition(mhi_cntrl, DEV_ST_TRANSITION_READY);
> > + else
> > + ret = (MHI_IN_MISSION_MODE(mhi_cntrl->ee)) ? 0 : -ETIMEDOUT;
> > +
> > if (ret)
> > mhi_power_down(mhi_cntrl, false);
> >
> We should come up with a better design for this later on.
> > diff --git a/include/linux/mhi.h b/include/linux/mhi.h
> > index 6e1122c..4620af8 100644
> > --- a/include/linux/mhi.h
> > +++ b/include/linux/mhi.h
> > @@ -120,6 +120,7 @@ struct mhi_link_info {
> > * @MHI_EE_WFW: WLAN firmware mode
> > * @MHI_EE_PTHRU: Passthrough
> > * @MHI_EE_EDL: Embedded downloader
> > + * @MHI_EE_FP, Flash Programmer Environment
> > */
> > enum mhi_ee_type {
> > MHI_EE_PBL,
> > @@ -129,7 +130,8 @@ enum mhi_ee_type {
> > MHI_EE_WFW,
> > MHI_EE_PTHRU,
> > MHI_EE_EDL,
> > - MHI_EE_MAX_SUPPORTED = MHI_EE_EDL,
> > + MHI_EE_FP,
> > + MHI_EE_MAX_SUPPORTED = MHI_EE_FP,
> > MHI_EE_DISABLE_TRANSITION, /* local EE, not related to mhi spec */
> > MHI_EE_NOT_SUPPORTED,
> > MHI_EE_MAX,
>
> Thanks,
> Bhaumik
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2020-11-16 07:10    [W:0.069 / U:0.764 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site