lkml.org 
[lkml]   [2020]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3] clk: renesas: r8a774c0: Add RPC clocks
Hi Geert,

Thank you for the review.

On Mon, Nov 16, 2020 at 8:34 AM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>
> Hi Prabhakar,
>
> On Tue, Nov 10, 2020 at 1:56 PM Lad Prabhakar
> <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> > Describe the RPCSRC internal clock and the RPC[D2] clocks derived from it,
> > as well as the RPC-IF module clock, in the RZ/G2E (R8A774C0) CPG/MSSR
> > driver.
> >
> > Add new clk type CLK_TYPE_GEN3E3_RPCSRC to register rpcsrc as a fixed
> > clock on R-Car Gen3 E3 (and also RZ/G2E which is identical to E3 SoC),
> > parent and the divider is set based on the register value CPG_RPCCKCR[4:3]
> > (parent is cross verified against MD[4:1] pins) which has been set prior
> > to booting the kernel.
> >
> > MD[4] MD[3] MD[2] MD[1]
> > 0 0 0 1 -> RPCSRC CLK source is PLL1
> > 0 0 1 1 -> RPCSRC CLK source is PLL1
> > 0 1 0 0 -> RPCSRC CLK source is PLL1
> > 1 0 1 1 -> RPCSRC CLK source is PLL1
> > x x x x -> For any other values RPCSRC CLK source is PLL0
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
>
> Thanks for your patch!
>
> > ---
> > v2->v3
> > * Implemented as a fixed clock
>
> Sounds fine to me. If we ever need to configure this clock from Linux,
> the driver can be changed.
>
> > --- a/drivers/clk/renesas/rcar-gen3-cpg.c
> > +++ b/drivers/clk/renesas/rcar-gen3-cpg.c
> > @@ -427,6 +427,19 @@ static struct clk * __init cpg_sd_clk_register(const char *name,
> > return clk;
> > }
> >
> > +static bool __init cpg_rpcsrc_e3_parent_is_pll0(u32 mode)
> > +{
> > + unsigned int e3_rpcsrc = (mode & GENMASK(4, 1)) >> 1;
> > + unsigned int pll1[] = { 0x1, 0x3, 0x4, 0xb, };
> > + int i;
> > +
> > + for (i = 0; i < ARRAY_SIZE(pll1); i++)
> > + if (e3_rpcsrc == pll1[i])
> > + return false;
>
> Did you know gcc (version 9.3.0) generates smaller code for:
>
> switch (e3_rpcsrc) {
> case 0x1:
> case 0x3:
> case 0x4:
> case 0xb:
> return false;
>
> default:
> return true;
> }
>
> ?
>
That's insightful thank you for the pointer.

> > @@ -696,6 +709,42 @@ struct clk * __init rcar_gen3_cpg_clk_register(struct device *dev,
> > cpg_rpcsrc_div_table,
> > &cpg_lock);
> >
> > + case CLK_TYPE_GEN3E3_RPCSRC:
> > + /*
> > + * Register RPCSRC as fixed factor clock based on the
> > + * MD[4:1] pins and CPG_RPCCKCR[4:3] register value for
> > + * which has been set prior to booting the kernel.
> > + */
> > +
> > + value = (readl(base + CPG_RPCCKCR) & GENMASK(4, 3)) >> 3;
> > + if (cpg_rpcsrc_e3_parent_is_pll0(cpg_mode)) {
> > + if (value != 2)
> > + return ERR_PTR(-EINVAL);
> > + } else {
> > + if (value == 2)
> > + return ERR_PTR(-EINVAL);
> > + }
>
> IMHO this cross-verification is not needed, and harmful: it prevents the
> boot loader from changing the configuration, which I think is a valid
> use case.
>
Agreed will drop this check (and also cpg_rpcsrc_e3_parent_is_pll0())

> > +
> > + switch (value) {
> > + case 0:
> > + div = 5;
> > + break;
> > + case 1:
> > + div = 3;
> > + break;
> > + case 2:
> > + parent = clks[core->parent >> 16];
> > + if (IS_ERR(parent))
> > + return ERR_CAST(parent);
> > + div = 8;
>
> R-Car D3 is very similar, but uses div = 5 instead of 8.
> Perhaps this value can be retrieved from cpg_core_clk.div?
> Of course, we can do that later, when D3 support is added.
>
Agreed, should the below be OK ?

#define DEF_FIXED_RPCSRC_E3(_name, _id, _parent0, _parent1, _div)

Cheers,
Prabhakar

> > + break;
> > + case 3:
> > + default:
> > + div = 2;
> > + break;
> > + }
> > + break;
> > +
> > case CLK_TYPE_GEN3_RPC:
> > return cpg_rpc_clk_register(core->name, base,
> > __clk_get_name(parent), notifiers);
>
> The rest looks good to me.
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds

\
 
 \ /
  Last update: 2020-11-16 09:56    [W:0.075 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site