lkml.org 
[lkml]   [2020]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] arm64: dts: freescale: update calibration table for TMU module
Date
From: Yuantian Tang <andy.tang@nxp.com>

Update the calibration table to make the temperature more accurate.
Three platforms have been updated: ls1012a, ls1043a and ls1046a.

Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
---
.../arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 63 ++++++++-------
.../arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 78 ++++++++++---------
.../arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 72 +++++++++--------
3 files changed, 112 insertions(+), 101 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 5be686a0de54..b3683cda7f5b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -293,43 +293,46 @@
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f00000 0x0 0x10000>;
interrupts = <0 33 0x4>;
- fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
- fsl,tmu-calibration = <0x00000000 0x00000026
- 0x00000001 0x0000002d
+ fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x60062>;
+ fsl,tmu-calibration = <0x00000000 0x00000025
+ 0x00000001 0x0000002c
0x00000002 0x00000032
0x00000003 0x00000039
0x00000004 0x0000003f
0x00000005 0x00000046
- 0x00000006 0x0000004d
- 0x00000007 0x00000054
- 0x00000008 0x0000005a
- 0x00000009 0x00000061
- 0x0000000a 0x0000006a
- 0x0000000b 0x00000071
-
- 0x00010000 0x00000025
- 0x00010001 0x0000002c
+ 0x00000006 0x0000004c
+ 0x00000007 0x00000053
+ 0x00000008 0x00000059
+ 0x00000009 0x0000005f
+ 0x0000000a 0x00000066
+ 0x0000000b 0x0000006c
+
+ 0x00010000 0x00000026
+ 0x00010001 0x0000002d
0x00010002 0x00000035
0x00010003 0x0000003d
0x00010004 0x00000045
- 0x00010005 0x0000004e
- 0x00010006 0x00000057
- 0x00010007 0x00000061
- 0x00010008 0x0000006b
- 0x00010009 0x00000076
-
- 0x00020000 0x00000029
- 0x00020001 0x00000033
- 0x00020002 0x0000003d
- 0x00020003 0x00000049
- 0x00020004 0x00000056
- 0x00020005 0x00000061
- 0x00020006 0x0000006d
-
- 0x00030000 0x00000021
- 0x00030001 0x0000002a
- 0x00030002 0x0000003c
- 0x00030003 0x0000004e>;
+ 0x00010005 0x0000004d
+ 0x00010006 0x00000055
+ 0x00010007 0x0000005d
+ 0x00010008 0x00000065
+ 0x00010009 0x0000006d
+
+ 0x00020000 0x00000026
+ 0x00020001 0x00000030
+ 0x00020002 0x0000003a
+ 0x00020003 0x00000044
+ 0x00020004 0x0000004e
+ 0x00020005 0x00000059
+ 0x00020006 0x00000063
+
+ 0x00030000 0x00000014
+ 0x00030001 0x00000021
+ 0x00030002 0x0000002e
+ 0x00030003 0x0000003a
+ 0x00030004 0x00000047
+ 0x00030005 0x00000053
+ 0x00030006 0x00000060>;
big-endian;
#thermal-sensor-cells = <1>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index d5d219311161..bbae4b353d3f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -403,43 +403,47 @@
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f00000 0x0 0x10000>;
interrupts = <0 33 0x4>;
- fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
- fsl,tmu-calibration = <0x00000000 0x00000026
- 0x00000001 0x0000002d
- 0x00000002 0x00000032
- 0x00000003 0x00000039
- 0x00000004 0x0000003f
- 0x00000005 0x00000046
- 0x00000006 0x0000004d
- 0x00000007 0x00000054
- 0x00000008 0x0000005a
- 0x00000009 0x00000061
- 0x0000000a 0x0000006a
- 0x0000000b 0x00000071
-
- 0x00010000 0x00000025
- 0x00010001 0x0000002c
- 0x00010002 0x00000035
- 0x00010003 0x0000003d
- 0x00010004 0x00000045
- 0x00010005 0x0000004e
- 0x00010006 0x00000057
- 0x00010007 0x00000061
- 0x00010008 0x0000006b
- 0x00010009 0x00000076
-
- 0x00020000 0x00000029
- 0x00020001 0x00000033
- 0x00020002 0x0000003d
- 0x00020003 0x00000049
- 0x00020004 0x00000056
- 0x00020005 0x00000061
- 0x00020006 0x0000006d
-
- 0x00030000 0x00000021
- 0x00030001 0x0000002a
- 0x00030002 0x0000003c
- 0x00030003 0x0000004e>;
+ fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
+ fsl,tmu-calibration = <0x00000000 0x00000023
+ 0x00000001 0x0000002a
+ 0x00000002 0x00000031
+ 0x00000003 0x00000037
+ 0x00000004 0x0000003e
+ 0x00000005 0x00000044
+ 0x00000006 0x0000004b
+ 0x00000007 0x00000051
+ 0x00000008 0x00000058
+ 0x00000009 0x0000005e
+ 0x0000000a 0x00000065
+ 0x0000000b 0x0000006b
+
+ 0x00010000 0x00000023
+ 0x00010001 0x0000002b
+ 0x00010002 0x00000033
+ 0x00010003 0x0000003b
+ 0x00010004 0x00000043
+ 0x00010005 0x0000004b
+ 0x00010006 0x00000054
+ 0x00010007 0x0000005c
+ 0x00010008 0x00000064
+ 0x00010009 0x0000006c
+
+ 0x00020000 0x00000021
+ 0x00020001 0x0000002c
+ 0x00020002 0x00000036
+ 0x00020003 0x00000040
+ 0x00020004 0x0000004b
+ 0x00020005 0x00000055
+ 0x00020006 0x0000005f
+
+ 0x00030000 0x00000013
+ 0x00030001 0x0000001d
+ 0x00030002 0x00000028
+ 0x00030003 0x00000032
+ 0x00030004 0x0000003d
+ 0x00030005 0x00000047
+ 0x00030006 0x00000052
+ 0x00030007 0x0000005c>;
#thermal-sensor-cells = <1>;
};

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 1fa39bacff4b..025e1f587662 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -400,45 +400,49 @@
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f00000 0x0 0x10000>;
interrupts = <0 33 0x4>;
- fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
+ fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
fsl,tmu-calibration =
/* Calibration data group 1 */
- <0x00000000 0x00000026
- 0x00000001 0x0000002d
- 0x00000002 0x00000032
- 0x00000003 0x00000039
- 0x00000004 0x0000003f
- 0x00000005 0x00000046
- 0x00000006 0x0000004d
- 0x00000007 0x00000054
- 0x00000008 0x0000005a
- 0x00000009 0x00000061
- 0x0000000a 0x0000006a
- 0x0000000b 0x00000071
+ <0x00000000 0x00000023
+ 0x00000001 0x00000029
+ 0x00000002 0x0000002f
+ 0x00000003 0x00000036
+ 0x00000004 0x0000003c
+ 0x00000005 0x00000042
+ 0x00000006 0x00000049
+ 0x00000007 0x0000004f
+ 0x00000008 0x00000055
+ 0x00000009 0x0000005c
+ 0x0000000a 0x00000062
+ 0x0000000b 0x00000068
/* Calibration data group 2 */
- 0x00010000 0x00000025
- 0x00010001 0x0000002c
- 0x00010002 0x00000035
- 0x00010003 0x0000003d
- 0x00010004 0x00000045
- 0x00010005 0x0000004e
- 0x00010006 0x00000057
- 0x00010007 0x00000061
- 0x00010008 0x0000006b
- 0x00010009 0x00000076
+ 0x00010000 0x00000022
+ 0x00010001 0x0000002a
+ 0x00010002 0x00000032
+ 0x00010003 0x0000003a
+ 0x00010004 0x00000042
+ 0x00010005 0x0000004a
+ 0x00010006 0x00000052
+ 0x00010007 0x0000005a
+ 0x00010008 0x00000062
+ 0x00010009 0x0000006a
/* Calibration data group 3 */
- 0x00020000 0x00000029
- 0x00020001 0x00000033
- 0x00020002 0x0000003d
- 0x00020003 0x00000049
- 0x00020004 0x00000056
- 0x00020005 0x00000061
- 0x00020006 0x0000006d
+ 0x00020000 0x00000021
+ 0x00020001 0x0000002b
+ 0x00020002 0x00000035
+ 0x00020003 0x0000003e
+ 0x00020004 0x00000048
+ 0x00020005 0x00000052
+ 0x00020006 0x0000005c
/* Calibration data group 4 */
- 0x00030000 0x00000021
- 0x00030001 0x0000002a
- 0x00030002 0x0000003c
- 0x00030003 0x0000004e>;
+ 0x00030000 0x00000011
+ 0x00030001 0x0000001a
+ 0x00030002 0x00000024
+ 0x00030003 0x0000002e
+ 0x00030004 0x00000038
+ 0x00030005 0x00000042
+ 0x00030006 0x0000004c
+ 0x00030007 0x00000056>;
big-endian;
#thermal-sensor-cells = <1>;
};
--
2.17.1
\
 
 \ /
  Last update: 2020-11-17 04:35    [W:1.544 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site