lkml.org 
[lkml]   [2020]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] vfio iommu type1: Improve vfio_iommu_type1_pin_pages performance
From
Date


On 2020/11/17 0:33, Alex Williamson wrote:
> On Mon, 16 Nov 2020 21:47:33 +0800
> "xuxiaoyang (C)" <xuxiaoyang2@huawei.com> wrote:
>
>> On 2020/11/14 0:44, Alex Williamson wrote:
>>> On Tue, 10 Nov 2020 21:42:33 +0800
>>> "xuxiaoyang (C)" <xuxiaoyang2@huawei.com> wrote:
>>>
>>>> vfio_iommu_type1_pin_pages is very inefficient because
>>>> it is processed page by page when calling vfio_pin_page_external.
>>>> Added contiguous_vaddr_get_pfn to process continuous pages
>>>> to reduce the number of loops, thereby improving performance.
>>>>
>>>> Signed-off-by: Xiaoyang Xu <xuxiaoyang2@huawei.com>
>>>> ---
>>>> drivers/vfio/vfio_iommu_type1.c | 241 ++++++++++++++++++++++++++++----
>>>> 1 file changed, 214 insertions(+), 27 deletions(-)
>>>
>>> Sorry for my previous misunderstanding of the logic here. Still, this
>>> adds a lot of complexity, can you quantify the performance improvement
>>> you're seeing? Would it instead be more worthwhile to support an
>>> interface that pins based on an iova and range? Further comments below.
>>>
>> Thank you for your reply. I have a set of performance test data for reference.
>> The host kernel version of my test environment is 4.19.36, and the test cases
>> are for pin one page and 512 pages. When pin 512pages, the input is a
>> continuous iova address. At the same time increase the measurement factor of
>> whether the mem backend uses large pages. The following is the average of
>> multiple tests.
>>
>> The patch was not applied
>> 1 page 512 pages
>> no huge pages: 1638ns 223651ns
>> THP: 1668ns 222330ns
>> HugeTLB: 1526ns 208151ns
>>
>> The patch was applied
>> 1 page 512 pages
>> no huge pages 1735ns 167286ns
>> THP: 1934ns 126900ns
>> HugeTLB: 1713ns 102188ns
>>
>> The performance will be reduced when the page is fixed with a single pin,
>> while the page time of continuous pins can be reduced to half of the original.
>> If you have other suggestions for testing methods, please let me know.
>
> These are artificial test results, which in fact show a performance
> decrease for the single page use cases. What do we see in typical real
> world scenarios? Do those real world scenarios tend more towards large
> arrays of contiguous IOVAs or single pages, or large arrays of
> discontiguous IOVAs? What's the resulting change in device
> performance? Are pages pinned at a high enough frequency that pinning
> latency results in a measurable benefit at the device or to the
> overhead on the host?
>
Thank you for your reply. It is difficult for me to construct these
use cases. When the device is performing DMA, frequent calls to
pin/unpin pages are a big overhead, so we will pin a large part of
the memory to create a memory pool at the beginning. Therefore, we
pay more attention to the performance of pin continuous pages.
Single page is processed in contiguous_vaddr_get_pfn, which will
reduce performance. We can keep the previous code processing path
in vfio_pin_page_external. As long as vfio_get_contiguous_pages_length
can return fast enough, the performance loss of single page processing
will be minimized.
>>>> diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c
>>>> index 67e827638995..935f80807527 100644
>>>> --- a/drivers/vfio/vfio_iommu_type1.c
>>>> +++ b/drivers/vfio/vfio_iommu_type1.c
>>>> @@ -628,6 +628,206 @@ static int vfio_unpin_page_external(struct vfio_dma *dma, dma_addr_t iova,
>>>> return unlocked;
>>>> }
>>>>
>>>> +static int contiguous_vaddr_get_pfn(struct mm_struct *mm, unsigned long vaddr,
>>>> + int prot, long npage, unsigned long *phys_pfn)
>>>> +{
>>>> + struct page **pages = NULL;
>>>> + unsigned int flags = 0;
>>>> + int i, ret;
>>>> +
>>>> + pages = kvmalloc_array(npage, sizeof(struct page *), GFP_KERNEL);
>>>> + if (!pages)
>>>> + return -ENOMEM;
>>>> +
>>>> + if (prot & IOMMU_WRITE)
>>>> + flags |= FOLL_WRITE;
>>>> +
>>>> + mmap_read_lock(mm);
>>>> + ret = pin_user_pages_remote(mm, vaddr, npage, flags | FOLL_LONGTERM,
>>>> + pages, NULL, NULL);
>>>
>>> This is essentially the root of the performance improvement claim,
>>> right? ie. we're pinning a range of pages rather than individually.
>>> Unfortunately it means we also add a dynamic memory allocation even
>>> when npage=1.
>>>
>> Yes, when npage = 1, I should keep the previous scheme of the scene
>> and use local variables to save time in allocated memory
>>>
>>>> + mmap_read_unlock(mm);
>>>> +
>>>> + for (i = 0; i < ret; i++)
>>>> + *(phys_pfn + i) = page_to_pfn(pages[i]);
>>>> +
>>>> + kvfree(pages);
>>>> +
>>>> + return ret;
>>>> +}
>>>> +
>>>> +static int vfio_pin_contiguous_pages_external(struct vfio_iommu *iommu,
>>>> + struct vfio_dma *dma,
>>>> + unsigned long *user_pfn,
>>>> + int npage, unsigned long *phys_pfn,
>>>> + bool do_accounting)
>>>> +{
>>>> + int ret, i, j, lock_acct = 0;
>>>> + unsigned long remote_vaddr;
>>>> + dma_addr_t iova;
>>>> + struct mm_struct *mm;
>>>> + struct vfio_pfn *vpfn;
>>>> +
>>>> + mm = get_task_mm(dma->task);
>>>> + if (!mm)
>>>> + return -ENODEV;
>>>> +
>>>> + iova = user_pfn[0] << PAGE_SHIFT;
>>>> + remote_vaddr = dma->vaddr + iova - dma->iova;
>>>> + ret = contiguous_vaddr_get_pfn(mm, remote_vaddr, dma->prot,
>>>> + npage, phys_pfn);
>>>> + mmput(mm);
>>>> + if (ret <= 0)
>>>> + return ret;
>>>> +
>>>> + npage = ret;
>>>> + for (i = 0; i < npage; i++) {
>>>> + iova = user_pfn[i] << PAGE_SHIFT;
>>>> + ret = vfio_add_to_pfn_list(dma, iova, phys_pfn[i]);
>>>> + if (ret)
>>>> + goto unwind;
>>>> +
>>>> + if (!is_invalid_reserved_pfn(phys_pfn[i]))
>>>> + lock_acct++;
>>>> +
>>>> + if (iommu->dirty_page_tracking) {
>>>> + unsigned long pgshift = __ffs(iommu->pgsize_bitmap);
>>>> +
>>>> + /*
>>>> + * Bitmap populated with the smallest supported page
>>>> + * size
>>>> + */
>>>> + bitmap_set(dma->bitmap,
>>>> + (iova - dma->iova) >> pgshift, 1);
>>>> + }
>>>
>>> It doesn't make sense that we wouldn't also optimize this to simply set
>>> npage bits. There's also no unwind for this.
>>>
>> Thank you for your correction, I should set npage to simplify.
>> There is no unwind process on the current master branch. Is this a bug?
>
> It's a bit tricky to know when it's ok to clear a bit in the dirty
> bitmap, it's much, much worse to accidentally clear a bit to
> incorrectly report a page a clean than it is to fail to unwind and
> leave pages marked as dirty. Given that this is an error path, we
> might be willing to incorrectly leave pages marked dirty rather than
> risk the alternative.
>
>>>> + }
>>>> +
>>>> + if (do_accounting) {
>>>> + ret = vfio_lock_acct(dma, lock_acct, true);
>>>> + if (ret) {
>>>> + if (ret == -ENOMEM)
>>>> + pr_warn("%s: Task %s (%d) RLIMIT_MEMLOCK (%ld) exceeded\n",
>>>> + __func__, dma->task->comm, task_pid_nr(dma->task),
>>>> + task_rlimit(dma->task, RLIMIT_MEMLOCK));
>>>> + goto unwind;
>>>> + }
>>>> + }
>>>
>>> This algorithm allows pinning many more pages in advance of testing
>>> whether we've exceeded the task locked memory limit than the per page
>>> approach.
>>>
>> More than 1~VFIO_PIN_PAGES_MAX_ENTRIES. But after failure, all pinned
>> pages will be released. Is there a big impact here?
>>>
>>>> +
>>>> + return i;
>>>> +unwind:
>>>> + for (j = 0; j < npage; j++) {
>>>> + put_pfn(phys_pfn[j], dma->prot);
>>>> + phys_pfn[j] = 0;
>>>> + }
>>>> +
>>>> + for (j = 0; j < i; j++) {
>>>> + iova = user_pfn[j] << PAGE_SHIFT;
>>>> + vpfn = vfio_find_vpfn(dma, iova);
>>>> + if (vpfn)
>>>
>>> Seems like not finding a vpfn would be an error.
>>>
>> I think the above process can ensure that vpfn is not NULL
>> and delete this judgment.
>>>> + vfio_remove_from_pfn_list(dma, vpfn);
>>>
>>> It seems poor form not to use vfio_iova_put_vfio_pfn() here even if we
>>> know we hold the only reference.
>>>
>> The logic here can be reduced to a loop.
>> When j < i, call vfio_iova_put_vfio_pfn.
>>>
>>>> + }
>>>> +
>>>> + return ret;
>>>> +}
>>>> +
>>>> +static int vfio_iommu_type1_pin_contiguous_pages(struct vfio_iommu *iommu,
>>>> + struct vfio_dma *dma,
>>>> + unsigned long *user_pfn,
>>>> + int npage, unsigned long *phys_pfn,
>>>> + bool do_accounting)
>>>> +{
>>>> + int ret, i, j;
>>>> + unsigned long remote_vaddr;
>>>> + dma_addr_t iova;
>>>> +
>>>> + ret = vfio_pin_contiguous_pages_external(iommu, dma, user_pfn, npage,
>>>> + phys_pfn, do_accounting);
>>>> + if (ret == npage)
>>>> + return ret;
>>>> +
>>>> + if (ret < 0)
>>>> + ret = 0;
>>>
>>>
>>> I'm lost, why do we need the single page iteration below??
>>>
>> Since there is no retry in contiguous_vaddr_get_pfn, oncean error occurs,
>> the remaining pages will be processed in a single page.
>> Is it better to increase retry in contiguous_vaddr_get_pfn?
>
> Do we expect it to work if we call it again? Do we expect the below
> single page iteration to work if the npage pinning failed? Why?
>
Vaddr_get_pfn contains error handling for the VM_PFNMAP type of
mapping area. In this case, we hope he can continue to work.
As mentioned above, the scene of n=1 will be processed directly
using vfio_pin_page_external.
>
>>>> + for (i = ret; i < npage; i++) {
>>>> + iova = user_pfn[i] << PAGE_SHIFT;
>>>> + remote_vaddr = dma->vaddr + iova - dma->iova;
>>>> +
>>>> + ret = vfio_pin_page_external(dma, remote_vaddr, &phys_pfn[i],
>>>> + do_accounting);
>>>> + if (ret)
>>>> + goto pin_unwind;
>>>> +
>>>> + ret = vfio_add_to_pfn_list(dma, iova, phys_pfn[i]);
>>>> + if (ret) {
>>>> + if (put_pfn(phys_pfn[i], dma->prot) && do_accounting)
>>>> + vfio_lock_acct(dma, -1, true);
>>>> + goto pin_unwind;
>>>> + }
>>>> +
>>>> + if (iommu->dirty_page_tracking) {
>>>> + unsigned long pgshift = __ffs(iommu->pgsize_bitmap);
>>>> +
>>>> + /*
>>>> + * Bitmap populated with the smallest supported page
>>>> + * size
>>>> + */
>>>> + bitmap_set(dma->bitmap,
>>>> + (iova - dma->iova) >> pgshift, 1);
>>>> + }
>>>> + }
>>>> +
>>>> + return i;
>>>> +
>>>> +pin_unwind:
>>>> + phys_pfn[i] = 0;
>>>> + for (j = 0; j < i; j++) {
>>>> + dma_addr_t iova;
>>>> +
>>>> + iova = user_pfn[j] << PAGE_SHIFT;
>>>> + vfio_unpin_page_external(dma, iova, do_accounting);
>>>> + phys_pfn[j] = 0;
>>>> + }
>>>> +
>>>> + return ret;
>>>> +}
>>>> +
>>>> +static int vfio_iommu_type1_get_contiguous_pages_length(struct vfio_iommu *iommu,
>>>> + unsigned long *user_pfn, int npage, int prot)
>>>> +{
>>>> + struct vfio_dma *dma_base;
>>>> + int i;
>>>> + dma_addr_t iova;
>>>> + struct vfio_pfn *vpfn;
>>>> +
>>>> + if (npage <= 1)
>>>> + return npage;
>>>> +
>>>> + iova = user_pfn[0] << PAGE_SHIFT;
>>>> + dma_base = vfio_find_dma(iommu, iova, PAGE_SIZE);
>>>> + if (!dma_base)
>>>> + return -EINVAL;
>>>> +
>>>> + if ((dma_base->prot & prot) != prot)
>>>> + return -EPERM;
>>>> +
>>>> + for (i = 1; i < npage; i++) {
>>>> + iova = user_pfn[i] << PAGE_SHIFT;
>>>> +
>>>> + if (iova >= dma_base->iova + dma_base->size ||
>>>> + iova + PAGE_SIZE <= dma_base->iova)
>>>> + break;
>>>> +
>>>> + vpfn = vfio_iova_get_vfio_pfn(dma_base, iova);
>>>> + if (vpfn) {
>>>> + vfio_iova_put_vfio_pfn(dma_base, vpfn);
>>>
>>> Why not just use vfio_find_vpfn() rather than get+put?
>>>
>> Thank you for your correction, I should use vfio_find_vpfn here.
>>>> + break;
>>>> + }
>>>> +
>>>> + if (user_pfn[i] != user_pfn[0] + i)
>>>
>>> Shouldn't this be the first test?
>>>
>> Thank you for your correction, the least costly judgment should be
>> the first test.
>>>> + break;
>>>> + }
>>>> + return i;
>>>> +}
>>>> +
>>>> static int vfio_iommu_type1_pin_pages(void *iommu_data,
>>>> struct iommu_group *iommu_group,
>>>> unsigned long *user_pfn,
>>>> @@ -637,9 +837,9 @@ static int vfio_iommu_type1_pin_pages(void *iommu_data,
>>>> struct vfio_iommu *iommu = iommu_data;
>>>> struct vfio_group *group;
>>>> int i, j, ret;
>>>> - unsigned long remote_vaddr;
>>>> struct vfio_dma *dma;
>>>> bool do_accounting;
>>>> + int contiguous_npage;
>>>>
>>>> if (!iommu || !user_pfn || !phys_pfn)
>>>> return -EINVAL;
>>>> @@ -663,7 +863,7 @@ static int vfio_iommu_type1_pin_pages(void *iommu_data,
>>>> */
>>>> do_accounting = !IS_IOMMU_CAP_DOMAIN_IN_CONTAINER(iommu);
>>>>
>>>> - for (i = 0; i < npage; i++) {
>>>> + for (i = 0; i < npage; i += contiguous_npage) {
>>>> dma_addr_t iova;
>>>> struct vfio_pfn *vpfn;
>>>>
>>>> @@ -682,31 +882,18 @@ static int vfio_iommu_type1_pin_pages(void *iommu_data,
>>>> vpfn = vfio_iova_get_vfio_pfn(dma, iova);
>>>> if (vpfn) {
>>>> phys_pfn[i] = vpfn->pfn;
>>>> - continue;
>>>> - }
>>>> -
>>>> - remote_vaddr = dma->vaddr + (iova - dma->iova);
>>>> - ret = vfio_pin_page_external(dma, remote_vaddr, &phys_pfn[i],
>>>> - do_accounting);
>>>> - if (ret)
>>>> - goto pin_unwind;
>>>> -
>>>> - ret = vfio_add_to_pfn_list(dma, iova, phys_pfn[i]);
>>>> - if (ret) {
>>>> - if (put_pfn(phys_pfn[i], dma->prot) && do_accounting)
>>>> - vfio_lock_acct(dma, -1, true);
>>>> - goto pin_unwind;
>>>> - }
>>>> -
>>>> - if (iommu->dirty_page_tracking) {
>>>> - unsigned long pgshift = __ffs(iommu->pgsize_bitmap);
>>>> -
>>>> - /*
>>>> - * Bitmap populated with the smallest supported page
>>>> - * size
>>>> - */
>>>> - bitmap_set(dma->bitmap,
>>>> - (iova - dma->iova) >> pgshift, 1);
>>>> + contiguous_npage = 1;
>>>> + } else {
>>>> + ret = vfio_iommu_type1_get_contiguous_pages_length(iommu,
>>>> + &user_pfn[i], npage - i, prot);
>>>
>>>
>>> It doesn't make a lot of sense to me that this isn't more integrated
>>> into the base function. For example, we're passing &user_pfn[i] for
>>> which we've already converted to an iova, found the vfio_dma associated
>>> to that iova, and checked the protection. This callout does all of
>>> that again on the same.
>>>
>> Thanks for your correction, I will delete the redundant check in
>> vfio_iommu_type1_get_contiguous_pages_length and simplify the function to
>> static int vfio_get_contiguous_pages_length (struct vfio_dma * dma,
>> unsigned long * user_pfn, int npage)
>>>> + if (ret < 0)
>>>> + goto pin_unwind;
>>>> +
>>>> + ret = vfio_iommu_type1_pin_contiguous_pages(iommu,
>>>> + dma, &user_pfn[i], ret, &phys_pfn[i], do_accounting);
>>>> + if (ret < 0)
>>>> + goto pin_unwind;
>>>> + contiguous_npage = ret;
>>>> }
>>>> }
>>>> ret = i;
>>>
>>>
>>> This all seems _way_ more complicated than it needs to be, there are
>>> too many different ways to flow through this code and claims of a
>>> performance improvement are not substantiated with evidence. The type1
>>> code is already too fragile. Please simplify and justify. Thanks,
>>>
>>> Alex
>>>
>>> .
>>>
>> The main issue is the balance between performance and complexity.
>> The test data has been given above, please tell me your opinion.
>
> I think the implementation here is overly complicated, there are too
> many code paths and it's not clear what real world improvement to
> expect. The test data only shows us the theoretical best case
> improvement of optimizing for a specific use case, without indicating
> how prevalent or frequent that use case occurs in operation of an
> actual device. I suspect that it's possible to make the optimization
> you're trying to achieve without this degree of complexity. Thanks,
>
> Alex
>
> .
>
More other real-world improvements may require feedback from others.
I will post another patch to fix the previous bug and improve the
performance of the pin page. Maybe others will make some improvements
on this basis.

Regards,
Xu

\
 
 \ /
  Last update: 2020-11-17 04:33    [W:0.110 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site