Messages in this thread | | | Date | Tue, 17 Nov 2020 01:37:57 +0200 | From | Vladimir Oltean <> | Subject | Re: [PATCH net] net: Have netpoll bring-up DSA management interface |
| |
On Mon, Nov 16, 2020 at 03:20:37PM -0800, Florian Fainelli wrote: > I remember now there was a reason for me to "open code" this, and this > is because since the patch is intended to be a bug fix, I wanted it to > be independent from: 2f1e8ea726e9 ("net: dsa: link interfaces with the > DSA master to get rid of lockdep warnings") > > which we would be depending on and is only two-ish releases away. Let me > know if you prefer different fixes for different branches.
Florian, I studied a little bit the reason why DSA wants the master interface to be open before the slave is (not enough to actually submit a fully tested patch, though). It's because Lennert Buytenhek wanted to ensure that DSA only manages the promiscuity of interfaces that are up, because of a bugfix from 2008. See commit:
commit df02c6ff2e3937379b31ea161b53229134fe92f7 Author: Lennert Buytenhek <buytenh@marvell.com> Date: Mon Nov 10 21:53:12 2008 -0800
dsa: fix master interface allmulti/promisc handling
Before commit b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 ("net: only invoke dev->change_rx_flags when device is UP"), the dsa driver could sort-of get away with only fiddling with the master interface's allmulti/promisc counts in ->change_rx_flags() and not touching them in ->open() or ->stop(). After this commit (note that it was merged almost simultaneously with the dsa patches, which is why this wasn't caught initially), the breakage that was already there became more apparent.
Since it makes no sense to keep the master interface's allmulti or promisc count pinned for a slave interface that is down, copy the vlan driver's sync logic (which does exactly what we want) over to dsa to fix this.
Bug report from Dirk Teurlings <dirk@upexia.nl> and Peter van Valderen <linux@ddcrew.com>.
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Tested-by: Peter van Valderen <linux@ddcrew.com> Signed-off-by: David S. Miller <davem@davemloft.net>
followed by commit
commit d2615bf450694c1302d86b9cc8a8958edfe4c3a4 Author: Vlad Yasevich <vyasevic@redhat.com> Date: Tue Nov 19 20:47:15 2013 -0500
net: core: Always propagate flag changes to interfaces
The following commit: b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 net: only invoke dev->change_rx_flags when device is UP
tried to fix a problem with VLAN devices and promiscuouse flag setting. The issue was that VLAN device was setting a flag on an interface that was down, thus resulting in bad promiscuity count. This commit blocked flag propagation to any device that is currently down.
A later commit: deede2fabe24e00bd7e246eb81cd5767dc6fcfc7 vlan: Don't propagate flag changes on down interfaces
fixed VLAN code to only propagate flags when the VLAN interface is up, thus fixing the same issue as above, only localized to VLAN.
The problem we have now is that if we have create a complex stack involving multiple software devices like bridges, bonds, and vlans, then it is possible that the flags would not propagate properly to the physical devices. A simple examle of the scenario is the following:
eth0----> bond0 ----> bridge0 ---> vlan50
If bond0 or eth0 happen to be down at the time bond0 is added to the bridge, then eth0 will never have promisc mode set which is currently required for operation as part of the bridge. As a result, packets with vlan50 will be dropped by the interface.
The only 2 devices that implement the special flag handling are VLAN and DSA and they both have required code to prevent incorrect flag propagation. As a result we can remove the generic solution introduced in b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 and leave it to the individual devices to decide whether they will block flag propagation or not.
Reported-by: Stefan Priebe <s.priebe@profihost.ag> Suggested-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
So Vlad Yasevich, through his patch, leaves this decision at the sole will of DSA now, it is no longer mandated by the networking core that the master interface must be up when changing its promiscuity.
As from my point of view? I think we're missing the forest for the trees by requiring the user to bring up the master interface. Even _if_ there still was a problem with promiscuity when the master is down (which btw I couldn't reproduce), then who's stopping DSA from simply bringing the master interface up in the first place... I think from a user's point of view this would be a beneficial change.
| |