lkml.org 
[lkml]   [2020]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] PCI: Disable PTM during suspend on Intel PCI bridges
On Mon, Nov 16, 2020 at 06:53:09PM +0100, Rafael J. Wysocki wrote:
> On Wed, Oct 7, 2020 at 7:10 PM Bjorn Helgaas <helgaas@kernel.org> wrote:
> > On Wed, Oct 07, 2020 at 06:53:16PM +0200, Rafael J. Wysocki wrote:
> > > On Wed, Oct 7, 2020 at 6:49 PM David E. Box <david.e.box@linux.intel.com> wrote:
> > > >
> > > > On Intel Platform Controller Hubs (PCH) since Cannon Lake, the Precision
> > > > Time Measurement (PTM) capability can prevent PCIe root ports from power
> > > > gating during suspend-to-idle, causing increased power consumption on
> > > > systems that suspend using Low Power S0 Idle [1]. The issue is yet to be
> > > > root caused but believed to be coming from a race condition in the suspend
> > > > flow as the incidence rate varies for different platforms on Linux but the
> > > > issue does not occur at all in other operating systems. For now, disable
> > > > the feature on suspend on all Intel root ports and enable again on resume.
> > >
> > > IMV it should also be noted that there is no particular reason why PTM
> > > would need to be enabled while the whole system is suspended. At
> > > least it doesn't seem to be particularly useful in that state.
> >
> > Is this a hardware erratum? If not, and this is working as designed,
> > it sounds like we'd need to apply this quirk to every device that
> > supports PTM. That's not really practical.
>
> Why not?

My objection was that the original patch is a quirk that applies only
to Intel devices.

If this is a generic thing that should be done for *all* devices that
support PTM, that's fine, but it should not be a quirk, and it should
not involve a list of Vendor or Device IDs.

> It looks like the capability should be saved by pci_save_state() (it
> isn't ATM, which appears to be a mistake) and restored by
> pci_restore_state(), so if that is implemented, the saving can be
> combined with the disabling in principle.

Yup, looks like a mistake. Maybe David can fix that at the same time
(probably a separate patch, though). I don't have a way to test it,
but he probably does.

> > The bugzilla says "there is no erratum as this does not affect
> > Windows," but that doesn't answer the question. What I want to know
> > is whether this is a *hardware* defect and whether it will be fixed in
> > future hardware.
>
> I cannot answer this question, sorry.
>
> ATM we only know that certain SoCs may not enter the deepest idle
> state if PTM is enabled on some PCIe root ports during suspend.
>
> Disabling PTM on those ports while suspending helps and hence the patch.
>
> It doesn't appear to qualify as a "hardware defect".
>
> > If it's a "wont-fix" hardware issue, we can just disable PTM
> > completely on Intel hardware and we won't have to worry about it
> > during suspend.
>
> I'm not following the logic here, sorry again.
>
> First of all, there are systems that never suspend, so why would they
> be affected by the remedy (whatever it is)?
>
> Second, it is not about the suspend failing entirely. It's about
> being able to make the system draw less power while suspended.
>
> Generally, if someone said "I can make the system draw less power
> while suspended if I disable PCIe feature X during suspend", would you
> disregard that?

My questions were all prompted by the Intel-specific nature of the
original patch, which suggests an ongoing maintenance burden. If it
can be done generically, I have no problem with it.

Bjorn

\
 
 \ /
  Last update: 2020-11-16 20:27    [W:0.058 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site