lkml.org 
[lkml]   [2020]   [Nov]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC PATCH 3/9] cxl/mem: Add a driver for the type-3 mailbox
On Fri, Nov 13, 2020 at 5:09 PM Ben Widawsky <ben.widawsky@intel.com> wrote:
[..]
> > Unused, maybe move it to the patch that adds the use?
> >
>
> This is a remnant from when Dan gave me the basis to do the mmio work. I agree
> it can be removed now.

Yes.

> > > +static int cxl_mem_dvsec(struct pci_dev *pdev, int dvsec)
> > > +{
> > > + int pos;
> > > +
> > > + pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_DVSEC);
> > > + if (!pos)
> > > + return 0;
> > > +
> > > + while (pos) {
> > > + u16 vendor, id;
> > > +
> > > + pci_read_config_word(pdev, pos + PCI_DVSEC_VENDOR_OFFSET, &vendor);
> > > + pci_read_config_word(pdev, pos + PCI_DVSEC_ID_OFFSET, &id);
> > > + if (vendor == PCI_DVSEC_VENDOR_CXL && dvsec == id)
> > > + return pos;
> > > +
> > > + pos = pci_find_next_ext_capability(pdev, pos, PCI_EXT_CAP_ID_DVSEC);
> > > + }
> > > +
> > > + return 0;
> > > +}
> >
> > I assume we'll refactor and move this into the PCI core after we
> > resolve the several places this is needed. When we do that, the
> > vendor would be passed in, so maybe we should do that here to make it
> > simpler to move this to the PCI core.
> >
>
> I think we'll need to keep this in order to try to keep the dream alive of
> loading a CXL kernel module on an older kernel. However, PCI code would benefit
> from having it (in an ideal world, it'd only be there).

So I think this is fine / expected to move standalone common code like
this to the PCI core. What I'm aiming to avoid with "the dream" Ben
references is unnecessary dependencies on core changes. CXL is large
enough that it will generate more backport pressure than ACPI NFIT /
LIBNVDIMM ever did. From a self interest perspective maximizing how
much of CXL can be enabled without core dependencies is a goal just to
lighten my own backport load. The internals of cxl_mem_dvsec() are
simple enough to backport.

>
> > > +static int cxl_mem_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> > > +{
> > > + struct device *dev = &pdev->dev;
> > > + struct cxl_mem *cxlm;
> > > + int rc, regloc;
> > > +
> > > + rc = cxl_bus_prepared(pdev);
> > > + if (rc != 0) {
> > > + dev_err(dev, "failed to acquire interface\n");
> >
> > Interesting naming: apparently when cxl_bus_prepared() returns a
> > non-zero ("true") value, it is actually *not* prepared?
> >
>
> This looks like a rebase fail to me, but I'll let Dan answer.

Yeah, I originally envisioned this as a ternary result with
-EPROBE_DEFER as a possible return value, but now that we've found a
way to handle CXL _OSC without colliding with legacy PCIE _OSC this
can indeed move to a boolean result.

Will fix up.

>
> > > + return rc;
> > > + }
> > > +
> > > + regloc = cxl_mem_dvsec(pdev, PCI_DVSEC_ID_CXL_REGLOC);
> > > + if (!regloc) {
> > > + dev_err(dev, "register location dvsec not found\n");
> > > + return -ENXIO;
> > > + }
> > > +
> > > + cxlm = devm_kzalloc(dev, sizeof(*cxlm), GFP_KERNEL);
> > > + if (!cxlm)
> > > + return -ENOMEM;
> >
> > Unused. And [4/9] removes it before it's *ever* used :)
> >
>
> Same as a few above, I think Dan was providing this for me to implement the
> reset. It could go away...

Yes, a collaboration artifact that we can clean up.

>
> > > + return 0;
> > > +}
> > > +
> > > +static void cxl_mem_remove(struct pci_dev *pdev)
> > > +{
> > > +}
> > > +
> > > +static const struct pci_device_id cxl_mem_pci_tbl[] = {
> > > + /* PCI class code for CXL.mem Type-3 Devices */
> > > + { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
> > > + PCI_CLASS_MEMORY_CXL, 0xffffff, 0 },
> > > + { /* terminate list */ },
> > > +};
> > > +MODULE_DEVICE_TABLE(pci, cxl_mem_pci_tbl);
> > > +
> > > +static struct pci_driver cxl_mem_driver = {
> > > + .name = KBUILD_MODNAME,
> > > + .id_table = cxl_mem_pci_tbl,
> > > + .probe = cxl_mem_probe,
> > > + .remove = cxl_mem_remove,
> > > +};
> > > +
> > > +MODULE_LICENSE("GPL v2");
> > > +MODULE_AUTHOR("Intel Corporation");
> > > +module_pci_driver(cxl_mem_driver);
> > > +MODULE_IMPORT_NS(CXL);
> > > diff --git a/drivers/cxl/pci.h b/drivers/cxl/pci.h
> > > new file mode 100644
> > > index 000000000000..beb03921e6da
> > > --- /dev/null
> >
> > > +++ b/drivers/cxl/pci.h
> > > @@ -0,0 +1,15 @@
> > > +// SPDX-License-Identifier: GPL-2.0-only
> > > +// Copyright(c) 2020 Intel Corporation. All rights reserved.
> >
> > /* SPDX-... */
> > /* Copyright ...*/
> >
> > The SPDX rules are a bit arcane and annoyingly hard to grep for, but
> > I found them in Documentation/process/license-rules.rst

Yes, I did not realize the header vs source /* */ vs // SPDX style.

> >
> > > +#ifndef __CXL_PCI_H__
> > > +#define __CXL_PCI_H__
> > > +
> > > +#define PCI_CLASS_MEMORY_CXL 0x050210
> > > +
> > > +#define PCI_EXT_CAP_ID_DVSEC 0x23
> > > +#define PCI_DVSEC_VENDOR_CXL 0x1E98
> > > +#define PCI_DVSEC_VENDOR_OFFSET 0x4
> > > +#define PCI_DVSEC_ID_OFFSET 0x8
> > > +#define PCI_DVSEC_ID_CXL 0x0
> > > +#define PCI_DVSEC_ID_CXL_REGLOC 0x8
> >
> > I assume these will go in include/linux/pci_ids.h (PCI_CLASS_...) and
> > include/uapi/linux/pci_regs.h (the rest) eventually, after we get the
> > merge issues sorted out. But if they're only used in cxl/mem.c, I'd
> > put them there for now.

Yes, I assume they'll move eventually. I'm cheating a standalone
backport driver organization in the meantime.

\
 
 \ /
  Last update: 2020-11-15 01:25    [W:0.255 / U:0.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site