lkml.org 
[lkml]   [2020]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [RFC PATCH 5/9] cxl/mem: Find device capabilities
On Tue, Nov 10, 2020 at 09:43:52PM -0800, Ben Widawsky wrote:
> CXL devices contain an array of capabilities that describe the
> interactions software can interact with the device, or firmware running
> on the device. A CXL compliant device must implement the device status
> and the mailbox capability. A CXL compliant memory device must implement
> the memory device capability.
>
> Each of the capabilities can [will] provide an offset within the MMIO
> region for interacting with the CXL device.
>
> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
> ---
> drivers/cxl/cxl.h | 89 +++++++++++++++++++++++++++++++++++++++++++++++
> drivers/cxl/mem.c | 58 +++++++++++++++++++++++++++---
> 2 files changed, 143 insertions(+), 4 deletions(-)
> create mode 100644 drivers/cxl/cxl.h
>
> diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
> new file mode 100644
> index 000000000000..02858ae63d6d
> --- /dev/null
> +++ b/drivers/cxl/cxl.h
> @@ -0,0 +1,89 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +// Copyright(c) 2020 Intel Corporation. All rights reserved.

Fix comment usage (I think SPDX in .h needs "/* */")

> +#ifndef __CXL_H__
> +#define __CXL_H__
> +
> +/* Device */
> +#define CXLDEV_CAP_ARRAY_REG 0x0
> +#define CXLDEV_CAP_ARRAY_CAP_ID 0
> +#define CXLDEV_CAP_ARRAY_ID(x) ((x) & 0xffff)
> +#define CXLDEV_CAP_ARRAY_COUNT(x) (((x) >> 32) & 0xffff)
> +
> +#define CXL_CAPABILITIES_CAP_ID_DEVICE_STATUS 1
> +#define CXL_CAPABILITIES_CAP_ID_PRIMARY_MAILBOX 2
> +#define CXL_CAPABILITIES_CAP_ID_SECONDARY_MAILBOX 3
> +#define CXL_CAPABILITIES_CAP_ID_MEMDEV 0x4000

Strange that the first three are decimal and the last is hex.

> +/* Mailbox */
> +#define CXLDEV_MB_CAPS 0x00
> +#define CXLDEV_MB_CAP_PAYLOAD_SIZE(cap) ((cap) & 0x1F)

Use upper- or lower-case hex consistently. Add tabs to line things
up.

> +#define CXLDEV_MB_CTRL 0x04
> +#define CXLDEV_MB_CMD 0x08
> +#define CXLDEV_MB_STATUS 0x10
> +#define CXLDEV_MB_BG_CMD_STATUS 0x18
> +
> +struct cxl_mem {
> + struct pci_dev *pdev;
> + void __iomem *regs;
> +
> + /* Cap 0000h */
> + struct {
> + void __iomem *regs;
> + } status;
> +
> + /* Cap 0002h */
> + struct {
> + void __iomem *regs;
> + size_t payload_size;
> + } mbox;
> +
> + /* Cap 0040h */
> + struct {
> + void __iomem *regs;
> + } mem;
> +};

Maybe a note about why READ_ONCE() is required?

> +#define cxl_reg(type) \
> + static inline void cxl_write_##type##_reg32(struct cxl_mem *cxlm, \
> + u32 reg, u32 value) \
> + { \
> + void __iomem *reg_addr = READ_ONCE(cxlm->type.regs); \
> + writel(value, reg_addr + reg); \
> + } \
> + static inline void cxl_write_##type##_reg64(struct cxl_mem *cxlm, \
> + u32 reg, u64 value) \
> + { \
> + void __iomem *reg_addr = READ_ONCE(cxlm->type.regs); \
> + writeq(value, reg_addr + reg); \
> + } \
> + static inline u32 cxl_read_##type##_reg32(struct cxl_mem *cxlm, \
> + u32 reg) \
> + { \
> + void __iomem *reg_addr = READ_ONCE(cxlm->type.regs); \
> + return readl(reg_addr + reg); \
> + } \
> + static inline u64 cxl_read_##type##_reg64(struct cxl_mem *cxlm, \
> + u32 reg) \
> + { \
> + void __iomem *reg_addr = READ_ONCE(cxlm->type.regs); \
> + return readq(reg_addr + reg); \
> + }
> +
> +cxl_reg(status)
> +cxl_reg(mbox)
> +
> +static inline u32 __cxl_raw_read_reg32(struct cxl_mem *cxlm, u32 reg)
> +{
> + void __iomem *reg_addr = READ_ONCE(cxlm->regs);
> +
> + return readl(reg_addr + reg);
> +}
> +
> +static inline u64 __cxl_raw_read_reg64(struct cxl_mem *cxlm, u32 reg)
> +{
> + void __iomem *reg_addr = READ_ONCE(cxlm->regs);
> +
> + return readq(reg_addr + reg);
> +}

Are the "__" prefixes here to leave space for something else in the
future? "__" typically means something like "raw", so right now it
sort of reads like "raw cxl raw read". So if you don't *need* the
"__" prefix, I'd drop it.

> +#endif /* __CXL_H__ */
> diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c
> index 8d9b9ab6c5ea..4109ef7c3ecb 100644
> --- a/drivers/cxl/mem.c
> +++ b/drivers/cxl/mem.c
> @@ -5,11 +5,57 @@
> #include <linux/io.h>
> #include "acpi.h"
> #include "pci.h"
> +#include "cxl.h"
>
> -struct cxl_mem {
> - struct pci_dev *pdev;
> - void __iomem *regs;
> -};

Probably nicer if you put "struct cxl_mem" in its ultimate destination
(drivers/cxl/cxl.h) from the beginning. Then it's easier to see what
this patch adds because it's not moving at the same time.

> +static int cxl_mem_setup_regs(struct cxl_mem *cxlm)
> +{
> + u64 cap_array;
> + int cap;
> +
> + cap_array = __cxl_raw_read_reg64(cxlm, CXLDEV_CAP_ARRAY_REG);
> + if (CXLDEV_CAP_ARRAY_ID(cap_array) != CXLDEV_CAP_ARRAY_CAP_ID)
> + return -ENODEV;
> +
> + for (cap = 1; cap <= CXLDEV_CAP_ARRAY_COUNT(cap_array); cap++) {
> + void *__iomem register_block;
> + u32 offset;
> + u16 cap_id;
> +
> + cap_id = __cxl_raw_read_reg32(cxlm, cap * 0x10) & 0xffff;
> + offset = __cxl_raw_read_reg32(cxlm, cap * 0x10 + 0x4);
> + register_block = cxlm->regs + offset;
> +
> + switch (cap_id) {
> + case CXL_CAPABILITIES_CAP_ID_DEVICE_STATUS:
> + dev_dbg(&cxlm->pdev->dev, "found Status capability\n");

Consider including the address or offset in these messages to help
debug? Printing a completely constant string always seems like a
missed opportunity to me.

> + cxlm->status.regs = register_block;
> + break;
> + case CXL_CAPABILITIES_CAP_ID_PRIMARY_MAILBOX:
> + dev_dbg(&cxlm->pdev->dev,
> + "found Mailbox capability\n");
> + cxlm->mbox.regs = register_block;
> + cxlm->mbox.payload_size = CXLDEV_MB_CAP_PAYLOAD_SIZE(cap_id);
> + break;
> + case CXL_CAPABILITIES_CAP_ID_SECONDARY_MAILBOX:
> + dev_dbg(&cxlm->pdev->dev,
> + "found UNSUPPORTED Secondary Mailbox capability\n");
> + break;
> + case CXL_CAPABILITIES_CAP_ID_MEMDEV:
> + dev_dbg(&cxlm->pdev->dev,
> + "found Memory Device capability\n");
> + cxlm->mem.regs = register_block;
> + break;
> + default:
> + dev_err(&cxlm->pdev->dev, "Unknown cap ID: %d\n", cap_id);
> + return -ENXIO;
> + }
> + }
> +
> + if (!cxlm->status.regs || !cxlm->mbox.regs || !cxlm->mem.regs)
> + return -ENXIO;
> +
> + return 0;
> +}
>
> static struct cxl_mem *cxl_mem_create(struct pci_dev *pdev, u32 reg_lo, u32 reg_hi)
> {
> @@ -110,6 +156,10 @@ static int cxl_mem_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> if (IS_ERR(cxlm))
> return -ENXIO;
>
> + rc = cxl_mem_setup_regs(cxlm);
> + if (rc)
> + return rc;
> +
> pci_set_drvdata(pdev, cxlm);
>
> return 0;
> --
> 2.29.2
>

\
 
 \ /
  Last update: 2020-11-13 19:26    [W:0.512 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site