Messages in this thread | | | From | Paul Kocialkowski <> | Subject | [PATCH v2 0/3] media: i2c: OV8865 image sensor support | Date | Fri, 13 Nov 2020 18:03:41 +0100 |
| |
This series adds support for the OV8865 image sensor, as a V4L2 subdev driver. Although an initial series was submitted by Kévin L'hôpital some weeks ago, this version is significantly new and should be considered a new series.
The final patch (not for merge) shows how to enable the OV8865 on the Banana Pi Camera Board v2 with the Banana Pi M3.
Changes since v1: - Used runtime pm; - Used assigned-clock-rate; - Removed clock name; - Returned closest size in set_fmt; - Removed unneeded references to v4l2 controls; - Removed unneeded structure packing attribute; - Removed i2c device table; - Dual-licensed bindings; - Used SPDX tags.
Cheers,
Paul
Kévin L'hôpital (1): ARM: dts: sun8i: a83t: bananapi-m3: Enable MIPI CSI-2 with OV8865
Paul Kocialkowski (2): dt-bindings: media: i2c: Add OV8865 bindings documentation media: i2c: Add support for the OV8865 image sensor
.../bindings/media/i2c/ovti,ov8865.yaml | 120 + arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 99 + drivers/media/i2c/Kconfig | 13 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/ov8865.c | 3043 +++++++++++++++++ 5 files changed, 3276 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml create mode 100644 drivers/media/i2c/ov8865.c
-- 2.28.0
| |