lkml.org 
[lkml]   [2020]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RESEND net-next 09/18] net: phy: nxp-tja11xx: implement generic .handle_interrupt() callback
Date
From: Ioana Ciornei <ioana.ciornei@nxp.com>

In an attempt to actually support shared IRQs in phylib, we now move the
responsibility of triggering the phylib state machine or just returning
IRQ_NONE, based on the IRQ status register, to the PHY driver. Having
3 different IRQ handling callbacks (.handle_interrupt(),
.did_interrupt() and .ack_interrupt() ) is confusing so let the PHY
driver implement directly an IRQ handler like any other device driver.
Make this driver follow the new convention.

Cc: Marek Vasut <marex@denx.de>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
drivers/net/phy/nxp-tja11xx.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)

diff --git a/drivers/net/phy/nxp-tja11xx.c b/drivers/net/phy/nxp-tja11xx.c
index a72fa0d2e7c7..1c4c5c267fe6 100644
--- a/drivers/net/phy/nxp-tja11xx.c
+++ b/drivers/net/phy/nxp-tja11xx.c
@@ -44,6 +44,9 @@
#define MII_CFG2_SLEEP_REQUEST_TO_16MS 0x3

#define MII_INTSRC 21
+#define MII_INTSRC_LINK_FAIL BIT(10)
+#define MII_INTSRC_LINK_UP BIT(9)
+#define MII_INTSRC_MASK (MII_INTSRC_LINK_FAIL | MII_INTSRC_LINK_UP)
#define MII_INTSRC_TEMP_ERR BIT(1)
#define MII_INTSRC_UV_ERR BIT(3)

@@ -604,6 +607,24 @@ static int tja11xx_config_intr(struct phy_device *phydev)
return phy_write(phydev, MII_INTEN, value);
}

+static irqreturn_t tja11xx_handle_interrupt(struct phy_device *phydev)
+{
+ int irq_status;
+
+ irq_status = phy_read(phydev, MII_INTSRC);
+ if (irq_status < 0) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ }
+
+ if (!(irq_status & MII_INTSRC_MASK))
+ return IRQ_NONE;
+
+ phy_trigger_machine(phydev);
+
+ return IRQ_HANDLED;
+}
+
static int tja11xx_cable_test_start(struct phy_device *phydev)
{
int ret;
@@ -749,6 +770,7 @@ static struct phy_driver tja11xx_driver[] = {
.get_stats = tja11xx_get_stats,
.ack_interrupt = tja11xx_ack_interrupt,
.config_intr = tja11xx_config_intr,
+ .handle_interrupt = tja11xx_handle_interrupt,
.cable_test_start = tja11xx_cable_test_start,
.cable_test_get_status = tja11xx_cable_test_get_status,
}, {
@@ -772,6 +794,7 @@ static struct phy_driver tja11xx_driver[] = {
.get_stats = tja11xx_get_stats,
.ack_interrupt = tja11xx_ack_interrupt,
.config_intr = tja11xx_config_intr,
+ .handle_interrupt = tja11xx_handle_interrupt,
.cable_test_start = tja11xx_cable_test_start,
.cable_test_get_status = tja11xx_cable_test_get_status,
}
--
2.28.0
\
 
 \ /
  Last update: 2020-11-13 17:55    [W:0.099 / U:0.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site