lkml.org 
[lkml]   [2020]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1] Input: touchscreen: ads7846.c: fix integer overflow on Rt calculation
Date
In some rare cases the 32 bit Rt value will overflow if z2 and x is max,
z1 is minimal value and x_plate_ohms is relatively high (for example 800
ohm). This would happen on some screen age with low pressure.

There are two possible fixes:
- make Rt 64bit
- reorder calculation to avoid overflow

The second variant seems to be preferable, since 64 bit calculation on
32 bit system is a bit more expensive.

Fixes: ffa458c1bd9b6f653008d450f337602f3d52a646 ("spi: ads7846 driver")
Co-Developed-by: David Jander <david@protonic.nl>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
drivers/input/touchscreen/ads7846.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 652d9bcfdaee..78d7159e92fe 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -993,10 +993,11 @@ static void ads7846_report_state(struct ads7846 *ts)
/* compute touch pressure resistance using equation #2 */
Rt = z2;
Rt -= z1;
- Rt *= x;
Rt *= ts->x_plate_ohms;
+ Rt = DIV_ROUND_CLOSEST(Rt, 16);
+ Rt *= x;
Rt /= z1;
- Rt = (Rt + 2047) >> 12;
+ Rt = DIV_ROUND_CLOSEST(Rt, 256);
} else {
Rt = 0;
}
--
2.28.0
\
 
 \ /
  Last update: 2020-11-13 12:23    [W:1.354 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site