lkml.org 
[lkml]   [2020]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: Regression: QCA6390 fails with "mm/page_alloc: place pages to tail in __free_pages_core()"
From
Date
Op 12.11.2020 om 11:48 schreef David Hildenbrand:
> Trying to understand the code, it looks like there are always two rounds of reqests. The first one always fails
> ("requesting one big chunk of DMA memory"), the second one (providing multiple chunks of DMA memory) is supposed to work
> - and we do allocate memory.
>
>
> In the *working* cases we have
>
> Respond mem req failed, result: 1, err: 0
> qmi failed to respond fw mem req:-22
> ...
> chip_id 0x0 chip_family 0xb board_id 0xff soc_id 0xffffffff
>
> We don't fail in qmi_txn_wait() - second request w
>
>
> In the *non-working* cases we have
>
> Respond mem req failed, result: 1, err: 0
> qmi failed to respond fw mem req:-22
> ...
> qmi failed memory request, err = -110
> qmi failed to respond fw mem req:-110
>
> We fail in qmi_txn_wait(). We run into a timeout (ETIMEDOUT).
>
> Can we bump up the timeout limit and see if things change? Maybe FW needs more time with other addresses.

I tried increasing ATH11K_QMI_WLANFW_TIMEOUT_MS 20 times to 100000 (i.e. 100 seconds) and it didn't have any positive
effect, the second error (-110) just came 100 seconds later and not 5.

\
 
 \ /
  Last update: 2020-11-13 09:18    [W:0.503 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site