lkml.org 
[lkml]   [2020]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] ARM: tegra: Populate OPP table for Tegra20 Ventana
From
Date
11.11.2020 23:31, Jon Hunter пишет:
>
> On 11/11/2020 13:47, Dmitry Osipenko wrote:
>> 11.11.2020 13:38, Jon Hunter пишет:
>>> Commit 9ce274630495 ("cpufreq: tegra20: Use generic cpufreq-dt driver
>>> (Tegra30 supported now)") update the Tegra20 CPUFREQ driver to use the
>>> generic CPUFREQ device-tree driver. Since this change CPUFREQ support
>>> on the Tegra20 Ventana platform has been broken because the necessary
>>> device-tree nodes with the operating point information are not populated
>>> for this platform. Fix this by updating device-tree for Venata to
>>> include the operating point informration for Tegra20.
>>>
>>> Fixes: 9ce274630495 ("cpufreq: tegra20: Use generic cpufreq-dt driver (Tegra30 supported now)")
>>> Cc: stable@vger.kernel.org
>>>
>>> Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
>>> ---
>>> arch/arm/boot/dts/tegra20-ventana.dts | 11 +++++++++++
>>> 1 file changed, 11 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
>>> index b158771ac0b7..055334ae3d28 100644
>>> --- a/arch/arm/boot/dts/tegra20-ventana.dts
>>> +++ b/arch/arm/boot/dts/tegra20-ventana.dts
>>> @@ -3,6 +3,7 @@
>>>
>>> #include <dt-bindings/input/input.h>
>>> #include "tegra20.dtsi"
>>> +#include "tegra20-cpu-opp.dtsi"
>>>
>>> / {
>>> model = "NVIDIA Tegra20 Ventana evaluation board";
>>> @@ -592,6 +593,16 @@ clk32k_in: clock@0 {
>>> #clock-cells = <0>;
>>> };
>>>
>>> + cpus {
>>> + cpu0: cpu@0 {
>>> + operating-points-v2 = <&cpu0_opp_table>;
>>> + };
>>> +
>>> + cpu@1 {
>>> + operating-points-v2 = <&cpu0_opp_table>;
>>> + };
>>> + };
>>> +
>>> gpio-keys {
>>> compatible = "gpio-keys";
>>>
>>>
>>
>> This could be wrong to do because CPU voltage is fixed to 1000mV in
>> Ventana's DT, are you sure that higher clock rates don't require higher
>> voltages? What is the CPU process ID and SoC speedo ID on Ventana?
>
> I see this in the bootlog ...
>
> [ 2.797684] tegra20-cpufreq tegra20-cpufreq: hardware version 0x2 0x2
>
>> You could easily hook up CPU voltage scaling, please see acer-500 DT and
>> patch [1] for examples of how to set up regulators in DT. But then it
>> shouldn't be a stable patch.
>
> According to the Ventana design guide the CPU voltage range is 0.8-1.0V
> and so it appears to be set to the max. The CPUFREQ test is reporting
> the following ...
>
> cpu: cpufreq: - CPU#0:
> cpu: cpufreq: - supported governors:
> cpu: cpufreq: - ondemand *
> cpu: cpufreq: - performance
> cpu: cpufreq: - schedutil
> cpu: cpufreq: - supported rates:
> cpu: cpufreq: - 216000
> cpu: cpufreq: - 312000
> cpu: cpufreq: - 456000
> cpu: cpufreq: - 608000
> cpu: cpufreq: - 760000
> cpu: cpufreq: - 816000
> cpu: cpufreq: - 912000
> cpu: cpufreq: - 1000000 *
> cpu: cpufreq: - CPU#1:
> cpu: cpufreq: - supported governors:
> cpu: cpufreq: - ondemand *
> cpu: cpufreq: - performance
> cpu: cpufreq: - schedutil
> cpu: cpufreq: - supported rates:
> cpu: cpufreq: - 216000
> cpu: cpufreq: - 312000
> cpu: cpufreq: - 456000
> cpu: cpufreq: - 608000
> cpu: cpufreq: - 760000
> cpu: cpufreq: - 816000
> cpu: cpufreq: - 912000
> cpu: cpufreq: - 1000000 *

If you don't see a message in KMSG saying "bringing vdd_cpu to
1000000uV", then should be good.

\
 
 \ /
  Last update: 2020-11-12 11:52    [W:0.062 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site