lkml.org 
[lkml]   [2020]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 8/8] rpmsg: Turn name service into a stand alone driver
From
Date
Hi Guennadi,

On 11/11/20 3:49 PM, Guennadi Liakhovetski wrote:
> Hi Arnaud,
>
> On Tue, Nov 10, 2020 at 07:18:45PM +0100, Arnaud POULIQUEN wrote:
>> Hi Mathieu, Guennadi,
>>
>> On 11/9/20 6:55 PM, Mathieu Poirier wrote:
>>> On Mon, Nov 09, 2020 at 11:20:24AM +0100, Guennadi Liakhovetski wrote:
>>>> Hi Arnaud,
>>>>
>>>> On Mon, Nov 09, 2020 at 09:48:37AM +0100, Arnaud POULIQUEN wrote:
>>>>> Hi Guennadi, Mathieu,
>>>>>
>>>>> On 11/6/20 6:53 PM, Mathieu Poirier wrote:
>>>>>> On Fri, Nov 06, 2020 at 03:00:28PM +0100, Guennadi Liakhovetski wrote:
>>>>>>> On Fri, Nov 06, 2020 at 02:15:45PM +0100, Guennadi Liakhovetski wrote:
>>>>>>>> Hi Mathieu, Arnaud,
>>>>>>>>
>>>>>>>> On Thu, Nov 05, 2020 at 03:50:28PM -0700, Mathieu Poirier wrote:
>>>>>>>>> From: Arnaud Pouliquen <arnaud.pouliquen@st.com>
>>>>>>>>>
>>>>>>>>> Make the RPMSG name service announcement a stand alone driver so that it
>>>>>>>>> can be reused by other subsystems. It is also the first step in making the
>>>>>>>>> functionatlity transport independent, i.e that is not tied to virtIO.
>>>>>>>>
>>>>>>>> Sorry, I just realised that my testing was incomplete. I haven't tested
>>>>>>>> automatic module loading and indeed it doesn't work. If rpmsg_ns is loaded
>>>>>>>> it probes and it's working, but if it isn't loaded and instead the rpmsg
>>>>>>>> bus driver is probed (e.g. virtio_rpmsg_bus), calling
>>>>>>>> rpmsg_ns_register_device() to create a new rpmsg_ns device doesn't cause
>>>>>>>> rpmsg_ns to be loaded.
>>>>>>>
>>>>>>> A simple fix for that is using MODULE_ALIAS("rpmsg:rpmsg_ns"); in rpmsg_ns.c
>>>>>>> but that alone doesn't fix the problem completely - the module does load then
>>>>>>> but not quickly enough, the NS announcement from the host / remote arrives
>>>>>>> before rpmsg_ns has properly registered. I think the best solution would be
>>>>>>> to link rpmsg_ns.c together with rpmsg_core.c. You'll probably want to keep
>>>>>>> the module name, so you could rename them to just core.c and ns.c.
>>>>>>
>>>>>> I'm pretty sure it is because virtio_device_ready() in rpmsg_probe() is called
>>>>>> before the kernel has finished loading the name space driver. There has to be
>>>>>> a way to prevent that from happening - I will investigate further.
>>>>>
>>>>> Right, no dependency is set so the rpmsg_ns driver is never probed...
>>>>> And name service announcement messages are dropped if the service is not present.
>>>>
>>>> The mentioned change
>>>>
>>>> -MODULE_ALIAS("rpmsg_ns");
>>>> +MODULE_ALIAS("rpmsg:rpmsg_ns");
>>>
>>> Yes, I'm good with that part.
>>>
>>>>
>>>> is actually a compulsory fix, without it the driver doesn't even get loaded when
>>>> a device id registered, using rpmsg_ns_register_device(). So this has to be done
>>>> as a minimum *if* we keep RPNsg NS as a separate kernel module. However, that
>>>> still doesn't fix the problem relyably because of timing. I've merged both the
>>>> RPMsg core and NS into a single module, which fixed the issue for me. I'm
>>>> appending a patch to this email, but since it's a "fixup" please, feel free to
>>>> roll it into the original work. But thinking about it, even linking modules
>>>> together doesn't guarantee the order. I think rpmsg_ns_register_device() should
>>>> actually actively wait for NS device probing to finish - successfully or not.
>>>> I can add a complete() / wait_for_completion() pair to the process if you like.
>>>>
>>>
>>> Working with a completion is the kind of thing I had in mind. But I would still
>>> like to keep the drivers separate and that's the part I need to think about.
>>
>> I reproduce the problem: the rpmsg_ns might not be probed on first message reception.
>> What makes the fix not simple is that the virtio forces the virtio status to ready
>> after the probe of the virtio unit [1].
>> Set this status tiggs the remote processor first messages.
>>
>> [1]https://elixir.bootlin.com/linux/latest/source/drivers/virtio/virtio.c#L253
>>
>> Guennadi: I'm not sure that your patch will solve the problem , look like it just reduces the
>> delay between the rpmsg_virtio and the rpmsg_ns probe (the module loading time is saved)
>
> Right, as I mentioned in the email, that specific patch version only makes the
> race window smaller, but doesn't close it completely. However, I think, we could
> use a completion to close it fully, we discussed it with Mathieu and I think he
> is working on a solution ATM.
>
>> Based on my observations, I can see two alternatives.
>> - rpmsg_ns.c is no longer an rpmsg driver but a kind of function library to manage a
>> generic name service.
>
> Right, this is basically the current state of the virtio_rpmsg_bus.c driver. You'd
> just need to make __rpmsg_create_ept() and rpmsg_ns_cb() global and generic.

Yes this is what i have in mind, having something generic that can be called by
the RPMSg bus.

>
>> - we implement a completion as proposed by Mathieu.
>
> Exactly, this is the second option. And I think if we link NS with the rpmsg core
> together (or use a different method to make sure it's loaded early), we can use
> a completion to close the raice completely. And since the waiting and the completing
> take place in the same NS driver, I think we can keep it quite simple. An updated
> version of my earlier patch is below.

Please find comments in your patch.

>Note, that it also fixes a memory leak in the
> proposed NS implementation:
>
> @@ -920,6 +920,7 @@ static int rpmsg_probe(struct virtio_device *vdev)
> return 0;
>
> free_coherent:
> + kfree(vch);
> dma_free_coherent(vdev->dev.parent, total_buf_space,
> bufs_va, vrp->bufs_dma);
> vqs_del:

Right, thanks for pointing that out!

>
> Thanks
> Guennadi
>
>> I tried this second solution based on the component bind mechanism.
>> I added the patch at the end of the mail (the patch is a POC, so not ready for upstream).
>> Maybe something simpler is possible. I'm just keeping in mind that we may have to add similar
>> services in the future.
>>
>> Regards,
>> Arnaud
>
> From: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
> Subject: [PATCH] fixup! rpmsg: Turn name service into a stand alone driver
>
> Link ns.c with core.c together to guarantee immediate probing.
>
> Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
> ---
> drivers/rpmsg/Makefile | 2 +-
> drivers/rpmsg/{rpmsg_core.c => core.c} | 13 +++--
> drivers/rpmsg/{rpmsg_ns.c => ns.c} | 49 ++++++++++++++-----
> drivers/rpmsg/virtio_rpmsg_bus.c | 5 +-
> include/linux/rpmsg.h | 4 +-
> .../{rpmsg_byteorder.h => rpmsg/byteorder.h} | 0
> include/linux/{rpmsg_ns.h => rpmsg/ns.h} | 16 +++---
> 7 files changed, 61 insertions(+), 28 deletions(-)
> rename drivers/rpmsg/{rpmsg_core.c => core.c} (99%)
> rename drivers/rpmsg/{rpmsg_ns.c => ns.c} (76%)
> rename include/linux/{rpmsg_byteorder.h => rpmsg/byteorder.h} (100%)
> rename include/linux/{rpmsg_ns.h => rpmsg/ns.h} (82%)
>
> diff --git a/drivers/rpmsg/Makefile b/drivers/rpmsg/Makefile
> index 8d452656f0ee..5aa79e167372 100644
> --- a/drivers/rpmsg/Makefile
> +++ b/drivers/rpmsg/Makefile
> @@ -1,7 +1,7 @@
> # SPDX-License-Identifier: GPL-2.0
> +rpmsg_core-objs := core.o ns.o
> obj-$(CONFIG_RPMSG) += rpmsg_core.o
> obj-$(CONFIG_RPMSG_CHAR) += rpmsg_char.o
> -obj-$(CONFIG_RPMSG_NS) += rpmsg_ns.o
> obj-$(CONFIG_RPMSG_MTK_SCP) += mtk_rpmsg.o
> qcom_glink-objs := qcom_glink_native.o qcom_glink_ssr.o
> obj-$(CONFIG_RPMSG_QCOM_GLINK) += qcom_glink.o
> diff --git a/drivers/rpmsg/rpmsg_core.c b/drivers/rpmsg/core.c
> similarity index 99%
> rename from drivers/rpmsg/rpmsg_core.c
> rename to drivers/rpmsg/core.c
> index 6381c1e00741..0c622cced804 100644
> --- a/drivers/rpmsg/rpmsg_core.c
> +++ b/drivers/rpmsg/core.c
> @@ -14,6 +14,7 @@
> #include <linux/kernel.h>
> #include <linux/module.h>
> #include <linux/rpmsg.h>
> +#include <linux/rpmsg/ns.h>
> #include <linux/of_device.h>
> #include <linux/pm_domain.h>
> #include <linux/slab.h>
> @@ -625,21 +626,27 @@ void unregister_rpmsg_driver(struct rpmsg_driver *rpdrv)
> }
> EXPORT_SYMBOL(unregister_rpmsg_driver);
>
> -
> static int __init rpmsg_init(void)
> {
> int ret;
>
> ret = bus_register(&rpmsg_bus);
> - if (ret)
> + if (ret) {
> pr_err("failed to register rpmsg bus: %d\n", ret);
> + return ret;
> + }
> +
> + ret = rpmsg_ns_init();
> + if (ret)
> + bus_unregister(&rpmsg_bus);
>
> return ret;
> }
> postcore_initcall(rpmsg_init);
>
> -static void __exit rpmsg_fini(void)
> +static void rpmsg_fini(void)
> {
> + rpmsg_ns_exit();
> bus_unregister(&rpmsg_bus);
> }
> module_exit(rpmsg_fini);

The drawback of this solution is that it makes the anoucement service ns
mandatory, but it is optional because it depends on the RPMsg backend bus.
RPMsg NS should be generic but optional.
What about calling this in rpmsg_virtio?

> diff --git a/drivers/rpmsg/rpmsg_ns.c b/drivers/rpmsg/ns.c
> similarity index 76%
> rename from drivers/rpmsg/rpmsg_ns.c
> rename to drivers/rpmsg/ns.c
> index 8e26824ca328..86c011bfb62f 100644
> --- a/drivers/rpmsg/rpmsg_ns.c
> +++ b/drivers/rpmsg/ns.c
> @@ -2,15 +2,47 @@
> /*
> * Copyright (C) STMicroelectronics 2020 - All Rights Reserved
> */
> +#include <linux/completion.h>
> #include <linux/device.h>
> +#include <linux/export.h>
> #include <linux/kernel.h>
> #include <linux/module.h>
> -#include <linux/slab.h>
> #include <linux/rpmsg.h>
> -#include <linux/rpmsg_ns.h>
> +#include <linux/rpmsg/ns.h>
> +#include <linux/slab.h>
>
> #include "rpmsg_internal.h"
>
> +int rpmsg_ns_register_device(struct rpmsg_device *rpdev)
> +{
> + int ret;
> +
> + strcpy(rpdev->id.name, "rpmsg_ns");
> + rpdev->driver_override = "rpmsg_ns";
> + rpdev->src = RPMSG_NS_ADDR;
> + rpdev->dst = RPMSG_NS_ADDR;
> +
> + ret = rpmsg_register_device(rpdev);
> + if (ret < 0)
> + return ret;
> +
> + if (!wait_for_completion_timeout(&rpdev->ns_ready,
> + msecs_to_jiffies(1))) {

Does this work if called in rproc_virtio_probe? i tried a similar implementation
but it always falls in timeout because rpmsg_ns_probe never called, probably due
to the serial probing.The rpmsg_ns probe always occurs after the end of the
virtio probe.

For me the wait completion can not be called during the virtio probe. That's why
i implemented it in rpmsg_recv_done to ensure that the service is available
before first message treatment.

Thanks,
Arnaud

> + struct rpmsg_channel_info info = {
> + .name = "rpmsg_ns",
> + .src = rpdev->src,
> + .dst = rpdev->dst,
> + };
> +
> + rpmsg_unregister_device(rpdev->dev.parent, &info);
> +
> + return -ETIMEDOUT;
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(rpmsg_ns_register_device);
> +
> /* invoked when a name service announcement arrives */
> static int rpmsg_ns_cb(struct rpmsg_device *rpdev, void *data, int len,
> void *priv, u32 src)
> @@ -76,6 +108,8 @@ static int rpmsg_ns_probe(struct rpmsg_device *rpdev)
> }
> rpdev->ept = ns_ept;
>
> + complete(&rpdev->ns_ready);
> +
> return 0;
> }
>
> @@ -84,7 +118,7 @@ static struct rpmsg_driver rpmsg_ns_driver = {
> .probe = rpmsg_ns_probe,
> };
>
> -static int rpmsg_ns_init(void)
> +int rpmsg_ns_init(void)
> {
> int ret;
>
> @@ -94,15 +128,8 @@ static int rpmsg_ns_init(void)
>
> return ret;
> }
> -postcore_initcall(rpmsg_ns_init);
>
> -static void rpmsg_ns_exit(void)
> +void rpmsg_ns_exit(void)
> {
> unregister_rpmsg_driver(&rpmsg_ns_driver);
> }
> -module_exit(rpmsg_ns_exit);
> -
> -MODULE_DESCRIPTION("Name service announcement rpmsg Driver");
> -MODULE_AUTHOR("Arnaud Pouliquen <arnaud.pouliquen@st.com>");
> -MODULE_ALIAS("rpmsg_ns");
> -MODULE_LICENSE("GPL v2");
> diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c
> index 10a16be986fc..fdf00cc5f57f 100644
> --- a/drivers/rpmsg/virtio_rpmsg_bus.c
> +++ b/drivers/rpmsg/virtio_rpmsg_bus.c
> @@ -19,8 +19,8 @@
> #include <linux/mutex.h>
> #include <linux/of_device.h>
> #include <linux/rpmsg.h>
> -#include <linux/rpmsg_byteorder.h>
> -#include <linux/rpmsg_ns.h>
> +#include <linux/rpmsg/byteorder.h>
> +#include <linux/rpmsg/ns.h>
> #include <linux/rpmsg/virtio.h>
> #include <linux/scatterlist.h>
> #include <linux/slab.h>
> @@ -920,6 +920,7 @@ static int rpmsg_probe(struct virtio_device *vdev)
> return 0;
>
> free_coherent:
> + kfree(vch);
> dma_free_coherent(vdev->dev.parent, total_buf_space,
> bufs_va, vrp->bufs_dma);
> vqs_del:
> diff --git a/include/linux/rpmsg.h b/include/linux/rpmsg.h
> index 8ee1b1dab657..71fd15ada5c0 100644
> --- a/include/linux/rpmsg.h
> +++ b/include/linux/rpmsg.h
> @@ -10,6 +10,7 @@
> #ifndef _LINUX_RPMSG_H
> #define _LINUX_RPMSG_H
>
> +#include <linux/completion.h>
> #include <linux/types.h>
> #include <linux/device.h>
> #include <linux/err.h>
> @@ -17,7 +18,7 @@
> #include <linux/kref.h>
> #include <linux/mutex.h>
> #include <linux/poll.h>
> -#include <linux/rpmsg_byteorder.h>
> +#include <linux/rpmsg/byteorder.h>
>
> #define RPMSG_ADDR_ANY 0xFFFFFFFF
>
> @@ -58,6 +59,7 @@ struct rpmsg_device {
> struct rpmsg_endpoint *ept;
> bool announce;
> bool little_endian;
> + struct completion ns_ready;
>
> const struct rpmsg_device_ops *ops;
> };
> diff --git a/include/linux/rpmsg_byteorder.h b/include/linux/rpmsg/byteorder.h
> similarity index 100%
> rename from include/linux/rpmsg_byteorder.h
> rename to include/linux/rpmsg/byteorder.h
> diff --git a/include/linux/rpmsg_ns.h b/include/linux/rpmsg/ns.h
> similarity index 82%
> rename from include/linux/rpmsg_ns.h
> rename to include/linux/rpmsg/ns.h
> index 42786bb759b5..2499db0c8c3d 100644
> --- a/include/linux/rpmsg_ns.h
> +++ b/include/linux/rpmsg/ns.h
> @@ -4,8 +4,9 @@
> #define _LINUX_RPMSG_NS_H
>
> #include <linux/mod_devicetable.h>
> +#include <linux/rpmsg.h>
> +#include <linux/rpmsg/byteorder.h>
> #include <linux/types.h>
> -#include <linux/rpmsg_byteorder.h>
>
> /**
> * struct rpmsg_ns_msg - dynamic name service announcement message
> @@ -46,14 +47,9 @@ enum rpmsg_ns_flags {
> * This function wraps rpmsg_register_device() preparing the rpdev for use as
> * basis for the rpmsg name service device.
> */
> -static inline int rpmsg_ns_register_device(struct rpmsg_device *rpdev)
> -{
> - strcpy(rpdev->id.name, "rpmsg_ns");
> - rpdev->driver_override = "rpmsg_ns";
> - rpdev->src = RPMSG_NS_ADDR;
> - rpdev->dst = RPMSG_NS_ADDR;
> -
> - return rpmsg_register_device(rpdev);
> -}
> +int rpmsg_ns_register_device(struct rpmsg_device *rpdev);
> +
> +int rpmsg_ns_init(void);
> +void rpmsg_ns_exit(void);
>
> #endif
>

\
 
 \ /
  Last update: 2020-11-12 11:18    [W:0.165 / U:1.772 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site