lkml.org 
[lkml]   [2020]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/2] phy: intel: Add Keem Bay USB PHY support
Date
Hi.

Intel Keem Bay USB subsystem incorporates DesignWare USB3.1 controller,
an USB3.1 (Gen1/2) PHY and an USB2.0 PHY. It is a Dual Role Device
(DRD), operating as either a USB host or a USB device.

The patchset is tested on Keem Bay EVM.

Thank you.

Best regards,
Zainie

Changes since v2:
- Remove dependency on OF in Kconfig.
- Remove header file linux/of.h, and add linux/mod_devicetable.h.
- Add comments for each usleep_range() usage, provide reason for the
delay.
- Replace usleep_range(2, 10) with udelay(2), as per
Documentation/timers/timers-howto.txt.
- In _probe(), remove variable np and use dev->of_node directly.

Changes since v1:
- Remove 2 patches that had been merged.
- Rebased to v5.10-rc3.
- Add Rob's Reviewed-by tag in the first patch.
- Use ARCH_KEEMBAY in Kconfig.
- Update #include header; remove <linux/of_address.h>, and add
<linux/bits.h>.
- Remove unnecessary comments.


Wan Ahmad Zainie (2):
dt-bindings: phy: Add Intel Keem Bay USB PHY bindings
phy: intel: Add Keem Bay USB PHY support

.../bindings/phy/intel,phy-keembay-usb.yaml | 44 +++
drivers/phy/intel/Kconfig | 12 +
drivers/phy/intel/Makefile | 1 +
drivers/phy/intel/phy-intel-keembay-usb.c | 300 ++++++++++++++++++
4 files changed, 357 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/intel,phy-keembay-usb.yaml
create mode 100644 drivers/phy/intel/phy-intel-keembay-usb.c

--
2.17.1

\
 
 \ /
  Last update: 2020-11-12 11:00    [W:0.044 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site