lkml.org 
[lkml]   [2020]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] kfence: Avoid stalling work queue task without allocations
On Wed, Nov 11, 2020 at 10:23AM -0800, Paul E. McKenney wrote:
> On Wed, Nov 11, 2020 at 01:05:43PM -0500, Steven Rostedt wrote:
> > On Wed, 11 Nov 2020 14:38:13 +0100
> > Marco Elver <elver@google.com> wrote:
> >
> > > [+Cc folks who can maybe help figure out what's going on, since I get
> > > warnings even without KFENCE on next-20201110.]
> > >
> > > On Wed, Nov 11, 2020 at 09:29AM +0100, Marco Elver wrote:
> > > > On Wed, 11 Nov 2020 at 00:23, Anders Roxell <anders.roxell@linaro.org> wrote:
> > > > [...]
> > > > > I gave them a spin on next-20201105 [1] and on next-20201110 [2].
> > > > >
> > > > > I eventually got to a prompt on next-20201105.
> > > > > However, I got to this kernel panic on the next-20201110:
> > > > >
> > > > > [...]
> > > > > [ 1514.089966][ T1] Testing event system initcall: OK
> > > > > [ 1514.806232][ T1] Running tests on all trace events:
> > > > > [ 1514.857835][ T1] Testing all events:
> > > > > [ 1525.503262][ C0] hrtimer: interrupt took 10902600 ns
> > > > > [ 1623.861452][ C0] BUG: workqueue lockup - pool cpus=0 node=0
> > > > > flags=0x0 nice=0 stuck for 65s!
> > > > > [...]
> >
> > OK, so this blows up when you enable all events?
> >
> > Note, it could just be adding overhead (which is exasperated with other
> > debug options enabled), which could open up a race window.
> >
> >
> > > > > [ 7823.104349][ T28] Tainted: G W
> > > > > 5.10.0-rc3-next-20201110-00008-g8dc06700529d #3
> > > > > [ 7833.206491][ T28] "echo 0 >
> > > > > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> > > > > [ 7840.750700][ T28] task:kworker/0:1 state:D stack:26640 pid:
> > > > > 1872 ppid: 2 flags:0x00000428
> > > > > [ 7875.642531][ T28] Workqueue: events toggle_allocation_gate
> > > > > [ 7889.178334][ T28] Call trace:
> > > > > [ 7897.066649][ T28] __switch_to+0x1cc/0x1e0
> > > > > [ 7905.326856][ T28] 0xffff00000f7077b0
> > > > > [ 7928.354644][ T28] INFO: lockdep is turned off.
> > > > > [ 7934.022572][ T28] Kernel panic - not syncing: hung_task: blocked tasks
> > > > > [ 7934.032039][ T28] CPU: 0 PID: 28 Comm: khungtaskd Tainted: G
> > > > > W 5.10.0-rc3-next-20201110-00008-g8dc06700529d #3
> > > > > [ 7934.045586][ T28] Hardware name: linux,dummy-virt (DT)
> > > > > [ 7934.053677][ T28] Call trace:
> > > > > [ 7934.060276][ T28] dump_backtrace+0x0/0x420
> > > > > [ 7934.067635][ T28] show_stack+0x38/0xa0
> > > > > [ 7934.091277][ T28] dump_stack+0x1d4/0x278
> > > > > [ 7934.098878][ T28] panic+0x304/0x5d8
> > > > > [ 7934.114923][ T28] check_hung_uninterruptible_tasks+0x5e4/0x640
> > > > > [ 7934.123823][ T28] watchdog+0x138/0x160
> > > > > [ 7934.131561][ T28] kthread+0x23c/0x260
> > > > > [ 7934.138590][ T28] ret_from_fork+0x10/0x18
> > > > > [ 7934.146631][ T28] Kernel Offset: disabled
> > > > > [ 7934.153749][ T28] CPU features: 0x0240002,20002004
> > > > > [ 7934.161476][ T28] Memory Limit: none
> > > > > [ 7934.171272][ T28] ---[ end Kernel panic - not syncing: hung_task:
> > > > > blocked tasks ]---
> > > > >
> > > > > Cheers,
> > > > > Anders
> > > > > [1] https://people.linaro.org/~anders.roxell/output-next-20201105-test.log
> > > > > [2] https://people.linaro.org/~anders.roxell/output-next-20201110-test.log
> > > >
> > > > Thanks for testing. The fact that it passes on next-20201105 but not
> > > > on 20201110 is strange. If you boot with KFENCE disabled (boot param
> > > > kfence.sample_interval=0), does it boot?
> > > [...]
> > >
> > > Right, so I think this is no longer KFENCE's fault. This looks like
> > > something scheduler/RCU/ftrace related?! I notice that there have been
> > > scheduler changes between next-20201105 and next-20201110.
> >
> > I'm not sure any of that would cause this.
> >
> > >
> > > I get this with KFENCE disabled:
> > >
> > > | Running tests on all trace events:
> > > | Testing all events:
> > > | BUG: workqueue lockup - pool cpus=0 node=0 flags=0x0 nice=0 stuck for 32s!
> > > | Showing busy workqueues and worker pools:
> > > | workqueue events: flags=0x0
> > > | pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
> > > | pending: vmstat_shepherd
> > > | workqueue events_power_efficient: flags=0x82
> > > | pwq 2: cpus=0 flags=0x5 nice=0 active=2/256 refcnt=4
> > > | in-flight: 107:neigh_periodic_work
> > > | pending: do_cache_clean
> > > | pool 2: cpus=0 flags=0x5 nice=0 hung=3s workers=2 manager: 7
> > > | rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
> > > | (detected by 0, t=6502 jiffies, g=2885, q=4)
> > > | rcu: All QSes seen, last rcu_preempt kthread activity 5174 (4295523265-4295518091), jiffies_till_next_fqs=1, root ->qsmask 0x0
> > > | rcu: rcu_preempt kthread starved for 5174 jiffies! g2885 f0x2 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=0
> > > | rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
> > > | rcu: RCU grace-period kthread stack dump:
> > > | task:rcu_preempt state:R running task stack: 0 pid: 10 ppid: 2 flags:0x00000428
> > > | Call trace:
> > > | __switch_to+0x100/0x1e0
> > > | __schedule+0x2d0/0x890
> > > | preempt_schedule_notrace+0x70/0x1c0
> > > | ftrace_ops_no_ops+0x174/0x250
> > > | ftrace_graph_call+0x0/0xc
> >
> > Note, just because ftrace is called here, the blocked task was preempted
> > when the ftrace code called preempt_enable_notrace().
> >
> >
> > > | preempt_count_add+0x1c/0x180
> > > | schedule+0x44/0x108
> > > | schedule_timeout+0x394/0x530
> > > | rcu_gp_kthread+0x76c/0x19a8
> > > | kthread+0x174/0x188
> > > | ret_from_fork+0x10/0x18
> > > |
> > > | ================================
> > > | WARNING: inconsistent lock state
> > > | 5.10.0-rc3-next-20201110-00001-gc07b306d7fa5-dirty #18 Not tainted
> > > | --------------------------------
> > > | inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
> > > | kcompactd0/26 [HC0[0]:SC0[0]:HE0:SE1] takes:
> > > | ffffae32e6bd4358 (rcu_node_0){?.-.}-{2:2}, at: rcu_sched_clock_irq+0x4a0/0xd18
> > > | {IN-HARDIRQ-W} state was registered at:
> >
> > I did some digging here and it looks like the rcu_node lock could be taken
> > without interrupts enabled when it does a stall print. That probably should
> > be fixed, but it's a symptom of the underlining bug and not the cause.
>
> Does this patch (in -next) help?
>
> Thanx, Paul

> rcu: Don't invoke try_invoke_on_locked_down_task() with irqs disabled

Sadly, no, next-20201110 already included that one, and that's what I
tested and got me all those warnings above.

Thanks,
-- Marco

\
 
 \ /
  Last update: 2020-11-11 19:35    [W:0.145 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site