lkml.org 
[lkml]   [2020]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/5] dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
On Mon, 09 Nov 2020 21:17:27 +0900, Daniel Palmer wrote:
> Header adds defines for the gpio number of each pad from the driver view.
>
> The gpio block seems to have enough registers for 128 lines but what line
> is mapped to a physical pin depends on the chip. The gpio block also seems
> to contain some registers that are not related to gpio but needed somewhere
> to go.
>
> Because of the above the driver itself uses the index of a pin's offset in
> an array of the possible offsets for a chip as the gpio number.
>
> Signed-off-by: Daniel Palmer <daniel@0x0f.com>
> ---
> MAINTAINERS | 1 +
> include/dt-bindings/gpio/msc313-gpio.h | 53 ++++++++++++++++++++++++++
> 2 files changed, 54 insertions(+)
> create mode 100644 include/dt-bindings/gpio/msc313-gpio.h
>

Reviewed-by: Rob Herring <robh@kernel.org>

\
 
 \ /
  Last update: 2020-11-11 21:29    [W:0.063 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site