lkml.org 
[lkml]   [2020]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND PATCH 18/19] arm64: allwinner: a100: Add MMC related nodes
Date
From: Yangtao Li <frank@allwinnertech.com>

The A100 has 3 MMC controllers, one of them being especially targeted to
eMMC. Let's add nodes on dts.

Signed-off-by: Yangtao Li <frank@allwinnertech.com>
---
.../arm64/boot/dts/allwinner/sun50i-a100.dtsi | 71 +++++++++++++++++++
1 file changed, 71 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
index c731bb9727c2..4adfc7d4854a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
@@ -169,12 +169,83 @@ pio: pinctrl@300b000 {
interrupt-controller;
#interrupt-cells = <3>;

+ mmc0_pins: mmc0-pins {
+ pins = "PF0", "PF1", "PF2", "PF3",
+ "PF4", "PF5";
+ function = "mmc0";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ /omit-if-no-ref/
+ mmc1_pins: mmc1-pins {
+ pins = "PG0", "PG1", "PG2", "PG3",
+ "PG4", "PG5";
+ function = "mmc1";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ mmc2_pins: mmc2-pins {
+ pins = "PC0", "PC1", "PC5", "PC6",
+ "PC8", "PC9", "PC10", "PC11",
+ "PC13", "PC14", "PC15", "PC16";
+ function = "mmc2";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
uart0_pb_pins: uart0-pb-pins {
pins = "PB9", "PB10";
function = "uart0";
};
};

+ mmc0: mmc@4020000 {
+ compatible = "allwinner,sun50i-a100-mmc";
+ reg = <0x04020000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC0>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc1: mmc@4021000 {
+ compatible = "allwinner,sun50i-a100-mmc";
+ reg = <0x04021000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC1>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc2: mmc@4022000 {
+ compatible = "allwinner,sun50i-a100-emmc";
+ reg = <0x04022000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC2>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
uart0: serial@5000000 {
compatible = "snps,dw-apb-uart";
reg = <0x05000000 0x400>;
--
2.28.0
\
 
 \ /
  Last update: 2020-11-10 07:49    [W:0.261 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site