Messages in this thread | | | From | Linus Walleij <> | Date | Tue, 10 Nov 2020 14:21:14 +0100 | Subject | Re: [PATCH v3 3/4] pinctrl: amd: print debounce filter info in debugfs |
| |
On Fri, Nov 6, 2020 at 12:19 AM Coiby Xu <coiby.xu@gmail.com> wrote:
> Print the status of debounce filter as follows, > $ cat /sys/kernel/debug/gpio > pin129 interrupt is disabled| interrupt is masked| disable wakeup in S0i3 state| disable wakeup in S3 state| > disable wakeup in S4/S5 state| input is high| pull-up is disabled| Pull-down is disabled| output is disabled| debouncing filter disabled| 0x50000 > ^^^^^^^^^^^^^^^^^^^^^^^^^^ > pin130 interrupt is disabled| interrupt is masked| disable wakeup in S0i3 state| disable wakeup in S3 state| > disable wakeup in S4/S5 state| input is high| pull-up is disabled| Pull-down is disabled| output is disabled| debouncing filter (high) enabled| debouncing timeout is 124800 (us)| 0x503c8 > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > > Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Patch applied for the next kernel (v5.11).
Yours, Linus Walleij
| |