lkml.org 
[lkml]   [2020]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 1/3] dt-bindings: gpio: sunxi:creat e a DT header for Allwinner pin controller
On Wed, Oct 28, 2020 at 08:15:45PM +0800, Frank Lee wrote:
> On Wed, Jul 29, 2020 at 9:06 PM Maxime Ripard <maxime@cerno.tech> wrote:
> >
> > Hi,
> >
> > On Sat, Jul 25, 2020 at 02:18:39PM -0500, Samuel Holland wrote:
> > > On 7/17/20 11:07 AM, Maxime Ripard wrote:
> > > > Hi!
> > > >
> > > > On Wed, Jul 15, 2020 at 07:54:12PM +0800, Frank Lee wrote:
> > > >> From: Yangtao Li <frank@allwinnertech.com>
> > > >>
> > > >> The sunxi gpio binding defines a few custom cells for its gpio specifier.
> > > >> Provide bank name for those.
> > > >>
> > > >> Signed-off-by: Yangtao Li <frank@allwinnertech.com>
> > > >
> > > > Thanks for working on this, I wanted to do it at some point but it kept
> > > > getting pushed further into my todo list.
> > > >
> > > >> ---
> > > >> include/dt-bindings/gpio/sunxi-gpio.h | 29 +++++++++++++++++++++++++++
> > > >> 1 file changed, 29 insertions(+)
> > > >> create mode 100644 include/dt-bindings/gpio/sunxi-gpio.h
> > > >>
> > > >> diff --git a/include/dt-bindings/gpio/sunxi-gpio.h b/include/dt-bindings/gpio/sunxi-gpio.h
> > > >> new file mode 100644
> > > >> index 000000000000..c692b4360da6
> > > >> --- /dev/null
> > > >> +++ b/include/dt-bindings/gpio/sunxi-gpio.h
> > > >
> > > > So generally we've been using the compatible name as the file name. You
> > > > should follow that convention too, and since it was added with the A10,
> > > > using the A10 compatible.
> > > >
> > > >> @@ -0,0 +1,29 @@
> > > >> +/* SPDX-License-Identifier: GPL-2.0 */
> > > >> +/*
> > > >> + * GPIO definitions for Allwinner SoCs
> > > >> + *
> > > >> + * Copyright (C) 2020 Yangtao Li <frank@allwinnertech.com>
> > > >> + */
> > > >> +
> > > >> +#ifndef _DT_BINDINGS_SUNXI_GPIO_H
> > > >> +#define _DT_BINDINGS_SUNXI_GPIO_H
> > > >> +
> > > >> +#include <dt-bindings/gpio/gpio.h>
> > > >> +
> > > >> +/* pio */
> > > >> +#define PA 0
> > > >> +#define PB 1
> > > >> +#define PC 2
> > > >> +#define PD 3
> > > >> +#define PE 4
> > > >> +#define PF 5
> > > >> +#define PG 6
> > > >> +#define PH 7
> > > >> +#define PI 8
> > > >> +
> > > >> +/* r-pio */
> > > >> +#define PL 0
> > > >> +#define PM 1
> > > >> +#define PN 2
> > > >> +
> > > >> +#endif /* _DT_BINDINGS_SUNXI_GPIO_H */
> > > >
> > > > Maybe we can go one step further and use a macro to have something like
> > > > PIN(A, 12) ?
> > >
> > > Since we have separate cells for the bank and pin, I don't think it would be
> > > appropriate to have a single macro generating both.
> >
> > Yeah, but it's "just" an encoding issue though, it's not a major concern
> > if it makes our life easier.
> >
> > > And I'm not sure what the benefit of the macro would be, if all it
> > > does is forward its arguments. Are you concerned that P[A-M] could
> > > conflict with something else in the device tree?
> >
> > There's indeed a bunch of names that are fairly generic and could be
> > conflicting with others (PD for power domain is the first one that comes
> > to my mind). Using a prefix would make the GPIO descriptors pretty long,
> > so it wasn't ideal either. A macro makes it readable without increasing
> > too much the risks of conflicts
>
> I tried to use macros, but failed.
>
> I have a look at some other GPIO macros, which have a prefix in front of them.
> Maybe we can do the same? It's all numbers. It's not intuitive.

This works

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index f3f8e177ab61..3a66d1102a78 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -8,6 +8,9 @@

#include <dt-bindings/gpio/gpio.h>

+#define SUNXI_PE 4
+#define SUNXI_PIN(bank, pin) SUNXI_##bank pin
+
/ {
model = "Olimex A64-Olinuxino";
compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64";
@@ -37,7 +40,7 @@ leds {

led-0 {
label = "a64-olinuxino:red:user";
- gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
+ gpios = <&pio SUNXI_PIN(PE, 17) GPIO_ACTIVE_HIGH>;
};
};

Maxime
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-11-10 12:36    [W:0.162 / U:0.788 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site