lkml.org 
[lkml]   [2020]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: jitterentropy: `jent_mod_init()` takes 17 ms
Date
Am Dienstag, 10. November 2020, 10:37:02 CET schrieb Paul Menzel:

Hi Paul,

> Dear Stephan,
>
>
> Thank you for the quick reply.
>
> Am 10.11.20 um 10:25 schrieb Stephan Mueller:
> > Am Montag, 9. November 2020, 20:31:02 CET schrieb Paul Menzel:
> >> By mistake I built `XFRM_ESP` into the Linux kernel, resulting in
> >>
> >> CONFIG_CRYPTO_SEQIV=y
> >> CONFIG_CRYPTO_ECHAINIV=y
> >>
> >> and also the Jitterentropy RNG to be built in.
> >>
> >> CRYPTO_JITTERENTROPY=y
> >>
> >> So, on the Asus F2A85-M PRO starting Linux 4.10-rc3 with
> >> `initcall_debug`, the init method is run unconditionally, and it takes
> >> 17.5 ms, which is over ten percent of the overall 900 ms the Linux
> >
> > Hm, 17.5 / 900 = 2%, or am I missing something?
>
> Indeed, that is embarrassing. My bad.
>
> >> kernel needs until loading the init process.
> >>
> >> [ 0.300544] calling jent_mod_init+0x0/0x2c @ 1
> >> [ 0.318438] initcall jent_mod_init+0x0/0x2c returned 0 after
> >> 17471 usecs
> >>
> >> Looking at the output of systemd-bootchart, it looks like, that this
> >> indeed delayed the boot a little, as the other init methods seem to be
> >> ordered after it.
> >>
> >> I am now building it as a module, but am wondering if the time can be
> >> reduced to below ten milliseconds.
> >
> > What you see is the test whether the Jitter RNG has a proper noise source.
> > The function jent_entropy_init() is the cause of the operation. It
> > performs 1024 times a test to validate the appropriateness of the noise
> > source. You can adjust that with the TESTLOOPCOUNT in this function. But
> > I am not sure adjusting is a wise course of action.
>
> Out of curiosity, why 1024 and not, for example, 128 or 2048? Is there
> some statistics behind it?

See [1] section 4.3 bullet 4 is the culprit. The startup test includes the
referenced test logic.

[1] https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-90B.pdf
>
>
> Kind regards,
>
> Paul


Ciao
Stephan


\
 
 \ /
  Last update: 2020-11-10 10:46    [W:0.049 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site