lkml.org 
[lkml]   [2020]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 05/10] ARM: dts: BCM5301X: Provide defaults ports container node
On Mon, Nov 09, 2020 at 07:31:08PM -0800, Florian Fainelli wrote:
> Provide an empty 'ports' container node with the correct #address-cells
> and #size-cells properties. This silences the following warning:
>
> arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml:
> ethernet-switch@18007000: 'oneOf' conditional failed, one must be fixed:
> 'ports' is a required property
> 'ethernet-ports' is a required property
> From schema:
> Documentation/devicetree/bindings/net/dsa/b53.yaml
>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
> arch/arm/boot/dts/bcm5301x.dtsi | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
> index 807580dd89f5..89993a8a6765 100644
> --- a/arch/arm/boot/dts/bcm5301x.dtsi
> +++ b/arch/arm/boot/dts/bcm5301x.dtsi
> @@ -489,6 +489,10 @@ srab: ethernet-switch@18007000 {
> status = "disabled";
>
> /* ports are defined in board DTS */
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };

This look a bit 'lone wolf' here. Not sure how much time you intend to
spend on this, but FWIW, others prefer to declare all ports in the SoC
DTSI with status = "disabled", and just enable the ones used per-board,
and add labels and PHY handles also per-board. Example: fsl-ls1028a.dtsi
and fsl-ls1028a-rdb.dts.

> };
>
> rng: rng@18004000 {
> --
> 2.25.1
>

\
 
 \ /
  Last update: 2020-11-10 23:14    [W:0.189 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site