lkml.org 
[lkml]   [2020]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 5/6] net: ipa: move GSI command opcode values into "gsi_reg.h"
Date
The gsi_ch_cmd_opcode, gsi_evt_cmd_opcode, and gsi_generic_cmd_opcode
enumerated types are values that fields in the GSI command registers
can take on. Move their definitions out of "gsi.c" and into "gsi_reg.h",
alongside the definition of registers they are associated with.

Signed-off-by: Alex Elder <elder@linaro.org>
---
drivers/net/ipa/gsi.c | 22 ----------------------
drivers/net/ipa/gsi_reg.h | 19 +++++++++++++++++++
2 files changed, 19 insertions(+), 22 deletions(-)

diff --git a/drivers/net/ipa/gsi.c b/drivers/net/ipa/gsi.c
index 179991cff8807..c6803231bf5db 100644
--- a/drivers/net/ipa/gsi.c
+++ b/drivers/net/ipa/gsi.c
@@ -109,28 +109,6 @@ struct gsi_event {
u8 chid;
};

-/* Hardware values representing an event ring immediate command opcode */
-enum gsi_evt_cmd_opcode {
- GSI_EVT_ALLOCATE = 0x0,
- GSI_EVT_RESET = 0x9,
- GSI_EVT_DE_ALLOC = 0xa,
-};
-
-/* Hardware values representing a generic immediate command opcode */
-enum gsi_generic_cmd_opcode {
- GSI_GENERIC_HALT_CHANNEL = 0x1,
- GSI_GENERIC_ALLOCATE_CHANNEL = 0x2,
-};
-
-/* Hardware values representing a channel immediate command opcode */
-enum gsi_ch_cmd_opcode {
- GSI_CH_ALLOCATE = 0x0,
- GSI_CH_START = 0x1,
- GSI_CH_STOP = 0x2,
- GSI_CH_RESET = 0x9,
- GSI_CH_DE_ALLOC = 0xa,
-};
-
/** gsi_channel_scratch_gpi - GPI protocol scratch register
* @max_outstanding_tre:
* Defines the maximum number of TREs allowed in a single transaction
diff --git a/drivers/net/ipa/gsi_reg.h b/drivers/net/ipa/gsi_reg.h
index d46e3300dff70..de3d87d278a98 100644
--- a/drivers/net/ipa/gsi_reg.h
+++ b/drivers/net/ipa/gsi_reg.h
@@ -223,6 +223,14 @@ enum gsi_channel_type {
(0x0001f008 + 0x4000 * (ee))
#define CH_CHID_FMASK GENMASK(7, 0)
#define CH_OPCODE_FMASK GENMASK(31, 24)
+/** enum gsi_ch_cmd_opcode - CH_OPCODE field values in CH_CMD */
+enum gsi_ch_cmd_opcode {
+ GSI_CH_ALLOCATE = 0x0,
+ GSI_CH_START = 0x1,
+ GSI_CH_STOP = 0x2,
+ GSI_CH_RESET = 0x9,
+ GSI_CH_DE_ALLOC = 0xa,
+};

#define GSI_EV_CH_CMD_OFFSET \
GSI_EE_N_EV_CH_CMD_OFFSET(GSI_EE_AP)
@@ -230,6 +238,12 @@ enum gsi_channel_type {
(0x0001f010 + 0x4000 * (ee))
#define EV_CHID_FMASK GENMASK(7, 0)
#define EV_OPCODE_FMASK GENMASK(31, 24)
+/** enum gsi_evt_cmd_opcode - EV_OPCODE field values in EV_CH_CMD */
+enum gsi_evt_cmd_opcode {
+ GSI_EVT_ALLOCATE = 0x0,
+ GSI_EVT_RESET = 0x9,
+ GSI_EVT_DE_ALLOC = 0xa,
+};

#define GSI_GENERIC_CMD_OFFSET \
GSI_EE_N_GENERIC_CMD_OFFSET(GSI_EE_AP)
@@ -238,6 +252,11 @@ enum gsi_channel_type {
#define GENERIC_OPCODE_FMASK GENMASK(4, 0)
#define GENERIC_CHID_FMASK GENMASK(9, 5)
#define GENERIC_EE_FMASK GENMASK(13, 10)
+/** enum gsi_generic_cmd_opcode - GENERIC_OPCODE field values in GENERIC_CMD */
+enum gsi_generic_cmd_opcode {
+ GSI_GENERIC_HALT_CHANNEL = 0x1,
+ GSI_GENERIC_ALLOCATE_CHANNEL = 0x2,
+};

#define GSI_GSI_HW_PARAM_2_OFFSET \
GSI_EE_N_GSI_HW_PARAM_2_OFFSET(GSI_EE_AP)
--
2.20.1
\
 
 \ /
  Last update: 2020-11-10 23:00    [W:0.094 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site