lkml.org 
[lkml]   [2020]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 10/13] usb: usbip/vhci: convert seqno to seqnum_ops
Date
seqnum_ops api is introduced to be used when a variable is used as
a sequence/stat counter and doesn't guard object lifetimes. This
clearly differentiates atomic_t usages that guard object lifetimes.

seqnum32 variables wrap around to INT_MIN when it overflows and
should not be used to guard resource lifetimes, device usage and
open counts that control state changes, and pm states.

Convert it to use seqnum_ops. This conversion replaces inc_return()
with _inc() followed by _read().

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
---
drivers/usb/usbip/vhci.h | 3 ++-
drivers/usb/usbip/vhci_hcd.c | 9 ++++++---
drivers/usb/usbip/vhci_rx.c | 3 ++-
3 files changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/usbip/vhci.h b/drivers/usb/usbip/vhci.h
index 5659dce1526e..cb76747f423b 100644
--- a/drivers/usb/usbip/vhci.h
+++ b/drivers/usb/usbip/vhci.h
@@ -15,6 +15,7 @@
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include <linux/wait.h>
+#include <linux/seqnum_ops.h>

struct vhci_device {
struct usb_device *udev;
@@ -108,7 +109,7 @@ struct vhci_hcd {
unsigned resuming:1;
unsigned long re_timeout;

- atomic_t seqnum;
+ struct seqnum32 seqnum;

/*
* NOTE:
diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
index 66cde5e5f796..0d854d9707e5 100644
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -11,6 +11,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/seqnum_ops.h>

#include "usbip_common.h"
#include "vhci.h"
@@ -665,7 +666,8 @@ static void vhci_tx_urb(struct urb *urb, struct vhci_device *vdev)

spin_lock_irqsave(&vdev->priv_lock, flags);

- priv->seqnum = atomic_inc_return(&vhci_hcd->seqnum);
+ seqnum32_inc(&vhci_hcd->seqnum);
+ priv->seqnum = seqnum32_read(&vhci_hcd->seqnum);
if (priv->seqnum == 0xffff)
dev_info(&urb->dev->dev, "seqnum max\n");

@@ -921,7 +923,8 @@ static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
return -ENOMEM;
}

- unlink->seqnum = atomic_inc_return(&vhci_hcd->seqnum);
+ seqnum32_inc(&vhci_hcd->seqnum);
+ unlink->seqnum = seqnum32_read(&vhci_hcd->seqnum);
if (unlink->seqnum == 0xffff)
pr_info("seqnum max\n");

@@ -1181,7 +1184,7 @@ static int vhci_start(struct usb_hcd *hcd)
vdev->rhport = rhport;
}

- atomic_set(&vhci_hcd->seqnum, 0);
+ seqnum32_set(&vhci_hcd->seqnum, 0);

hcd->power_budget = 0; /* no limit */
hcd->uses_new_polling = 1;
diff --git a/drivers/usb/usbip/vhci_rx.c b/drivers/usb/usbip/vhci_rx.c
index 266024cbb64f..0d0def7ccfee 100644
--- a/drivers/usb/usbip/vhci_rx.c
+++ b/drivers/usb/usbip/vhci_rx.c
@@ -5,6 +5,7 @@

#include <linux/kthread.h>
#include <linux/slab.h>
+#include <linux/seqnum_ops.h>

#include "usbip_common.h"
#include "vhci.h"
@@ -68,7 +69,7 @@ static void vhci_recv_ret_submit(struct vhci_device *vdev,
if (!urb) {
pr_err("cannot find a urb of seqnum %u max seqnum %d\n",
pdu->base.seqnum,
- atomic_read(&vhci_hcd->seqnum));
+ seqnum32_read(&vhci_hcd->seqnum));
usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);
return;
}
--
2.27.0
\
 
 \ /
  Last update: 2020-11-10 20:55    [W:1.894 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site