lkml.org 
[lkml]   [2020]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH V4 1/6] firmware: imx: always export SCU symbols
Date

> -----Original Message-----
> From: Shawn Guo <shawnguo@kernel.org>
> Sent: 2020年11月1日 15:43
> To: Joakim Zhang <qiangqing.zhang@nxp.com>
> Cc: mkl@pengutronix.de; robh+dt@kernel.org; s.hauer@pengutronix.de;
> kernel@pengutronix.de; dl-linux-imx <linux-imx@nxp.com>; Ying Liu
> <victor.liu@nxp.com>; linux-can@vger.kernel.org; netdev@vger.kernel.org;
> linux-kernel@vger.kernel.org
> Subject: Re: [PATCH V4 1/6] firmware: imx: always export SCU symbols
>
> On Wed, Oct 21, 2020 at 01:24:32PM +0800, Joakim Zhang wrote:
> > From: Liu Ying <victor.liu@nxp.com>
> >
> > Always export SCU symbols for both SCU SoCs and non-SCU SoCs to avoid
> > build error.
> >
> > Signed-off-by: Liu Ying <victor.liu@nxp.com>
> > Signed-off-by: Peng Fan <peng.fan@nxp.com>
> > Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
> > ---
> > include/linux/firmware/imx/ipc.h | 15 +++++++++++++++
>
> Could you rebase it to my imx/drivers branch? There is one patch from Peng
> Fan that already changed ipc.h.


Hi Shawn,

Please ignore 1/6 patch since it has been done with Peng's patch. I will resend flexcan patch set after Peng's patch goes into mainline.

Could you please review 5/6 patch which is suggested by Flexcan driver maintainer? Thanks.

Best Regards,
Joakim Zhang


> Shawn
>
> > include/linux/firmware/imx/svc/misc.h | 23 +++++++++++++++++++++++
> > 2 files changed, 38 insertions(+)
> >
> > diff --git a/include/linux/firmware/imx/ipc.h
> > b/include/linux/firmware/imx/ipc.h
> > index 891057434858..300fa253fc30 100644
> > --- a/include/linux/firmware/imx/ipc.h
> > +++ b/include/linux/firmware/imx/ipc.h
> > @@ -34,6 +34,7 @@ struct imx_sc_rpc_msg {
> > uint8_t func;
> > };
> >
> > +#if IS_ENABLED(CONFIG_IMX_SCU)
> > /*
> > * This is an function to send an RPC message over an IPC channel.
> > * It is called by client-side SCFW API function shims.
> > @@ -55,4 +56,18 @@ int imx_scu_call_rpc(struct imx_sc_ipc *ipc, void
> *msg, bool have_resp);
> > * @return Returns an error code (0 = success, failed if < 0)
> > */
> > int imx_scu_get_handle(struct imx_sc_ipc **ipc);
> > +
> > +#else
> > +static inline int
> > +imx_scu_call_rpc(struct imx_sc_ipc *ipc, void *msg, bool have_resp) {
> > + return -EIO;
> > +}
> > +
> > +static inline int imx_scu_get_handle(struct imx_sc_ipc **ipc) {
> > + return -EIO;
> > +}
> > +#endif
> > +
> > #endif /* _SC_IPC_H */
> > diff --git a/include/linux/firmware/imx/svc/misc.h
> > b/include/linux/firmware/imx/svc/misc.h
> > index 031dd4d3c766..d255048f17de 100644
> > --- a/include/linux/firmware/imx/svc/misc.h
> > +++ b/include/linux/firmware/imx/svc/misc.h
> > @@ -46,6 +46,7 @@ enum imx_misc_func {
> > * Control Functions
> > */
> >
> > +#if IS_ENABLED(CONFIG_IMX_SCU)
> > int imx_sc_misc_set_control(struct imx_sc_ipc *ipc, u32 resource,
> > u8 ctrl, u32 val);
> >
> > @@ -55,4 +56,26 @@ int imx_sc_misc_get_control(struct imx_sc_ipc *ipc,
> > u32 resource, int imx_sc_pm_cpu_start(struct imx_sc_ipc *ipc, u32
> resource,
> > bool enable, u64 phys_addr);
> >
> > +#else
> > +static inline int
> > +imx_sc_misc_set_control(struct imx_sc_ipc *ipc, u32 resource,
> > + u8 ctrl, u32 val)
> > +{
> > + return -EIO;
> > +}
> > +
> > +static inline int
> > +imx_sc_misc_get_control(struct imx_sc_ipc *ipc, u32 resource,
> > + u8 ctrl, u32 *val)
> > +{
> > + return -EIO;
> > +}
> > +
> > +static inline int imx_sc_pm_cpu_start(struct imx_sc_ipc *ipc, u32 resource,
> > + bool enable, u64 phys_addr) {
> > + return -EIO;
> > +}
> > +#endif
> > +
> > #endif /* _SC_MISC_API_H */
> > --
> > 2.17.1
> >
\
 
 \ /
  Last update: 2020-11-02 03:52    [W:0.053 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site