lkml.org 
[lkml]   [2020]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 1/2] dt-bindings: display: himax,hx8837: Add Himax HX8837 bindings
Hi Lubomir,

Thank you for the patch.

On Fri, Oct 30, 2020 at 04:07:59AM +0100, Lubomir Rintel wrote:
> Himax HX8837 is a secondary display controller used to drive the panel
> on OLPC platforms.
>
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> Reviewed-by: Rob Herring <robh@kernel.org>
>
> ---
> Changes since v4:
> - Rob's Reviewed-by
>
> Changes since v3:
> - Moved to bindings/display/
> - Added the ports
> - Converted to YAML
> - Removed Pavel's Ack, because the changes are substantial
>
> Changes since v2:
> - s/betweend/between/
>
> Changes since v1:
> - s/load-gpio/load-gpios/
> - Use interrupt bindings instead of gpio for the IRQ
>
> .../bindings/display/bridge/himax,hx8837.yaml | 96 +++++++++++++++++++
> 1 file changed, 96 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/himax,hx8837.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/himax,hx8837.yaml b/Documentation/devicetree/bindings/display/bridge/himax,hx8837.yaml
> new file mode 100644
> index 0000000000000..f5b0a00f5089d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/himax,hx8837.yaml
> @@ -0,0 +1,96 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2018,2019,2020 Lubomir Rintel <lkundrak@v3.sk>
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/himax,hx8837.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: HX8837 Display Controller Device Tree Bindings
> +
> +maintainers:
> + - Lubomir Rintel <lkundrak@v3.sk>
> +
> +properties:
> + compatible:
> + const: himax,hx8837
> +
> + reg:
> + const: 0xd
> +
> + load-gpios:
> + maxItems: 1
> + description: GPIO specifier of DCON_LOAD pin (active high)
> +
> + stat-gpios:
> + minItems: 2
> + description: GPIO specifier of DCON_STAT0 and DCON_STAT1 pins (active high)
> +
> + interrupts:
> + maxItems: 1
> + description: Interrupt specifier of DCON_IRQ pin (edge falling)
> +
> + ports:
> + type: object
> +
> + properties:
> + port@0:
> + type: object
> + description: |
> + Video port for RGB input.
> +
> + port@1:
> + type: object
> + description: |
> + Video port connected to the panel.
> +
> + required:
> + - port@0
> + - port@1

No regulators ?

> +
> +required:
> + - compatible
> + - reg
> + - load-gpios
> + - stat-gpios

Do stat-gpios need to be mandatory ? The driver in patch 2/2 doesn't
seem to use them, could we have boards where those signals are not
connected to GPIOs ?

> + - interrupts
> + - ports
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +

Could you please avoid spaces or tabs at end of lines ? There are three
other occurrences below.

> + lcd-controller@d {
> + compatible = "himax,hx8837";
> + reg = <0x0d>;
> + stat-gpios = <&gpio 100 GPIO_ACTIVE_HIGH>,
> + <&gpio 101 GPIO_ACTIVE_HIGH>;
> + load-gpios = <&gpio 142 GPIO_ACTIVE_HIGH>;
> + interrupts = <&gpio 124 IRQ_TYPE_EDGE_FALLING>;
> +
> + ports {
> + #address-cells = <0x01>;
> + #size-cells = <0x00>;
> +
> + port@0 {
> + reg = <0x00>;

reg = <0> should be fine. Same below.

With thse small issues addressed,

> + dcon_rgb_in: endpoint {
> + remote-endpoint = <&lcd0_rgb_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <0x01>;
> + dcon_gettl_out: endpoint {
> + remote-endpoint = <&panel_dettl_in>;
> + };
> + };
> + };
> + };
> + };

It's customary to end bindings with

...

(not sure why though, given that it seems to work find without)

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2020-11-01 17:41    [W:0.104 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site