lkml.org 
[lkml]   [2020]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] ARM: dts: BCM5301X: Linksys EA9500 add fixed partitions
Date
This router has dual paritions to store trx firmware image and
dual partitions for nvram. The second one for acts as a backup store.

When tested with OpenWrt, the default partition parser causes two issues:

1. It labels both nvram partitions as nvram. In factory, second one is
labeled devinfo.
2. It parses second trx image and tries to create second 'linux' partition
and fails with - cannot create another 'linux' partition

The following patch works around both of these issues.

Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
---
.../boot/dts/bcm47094-linksys-panamera.dts | 41 +++++++++++++++++++
1 file changed, 41 insertions(+)

diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index b36ed0ead733..488e83c1780d 100644
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -281,3 +281,44 @@ fixed-link {
&usb3_phy {
status = "okay";
};
+
+&nandcs {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x0000000 0x0080000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "nvram";
+ reg = <0x080000 0x0100000>;
+ };
+
+ partition@180000{
+ label = "devinfo";
+ reg = <0x0180000 0x080000>;
+ };
+
+ partition@200000 {
+ label = "firmware";
+ reg = <0x0200000 0x01D00000>;
+ compatible = "brcm,trx";
+ };
+
+ partition@1F00000 {
+ label = "failsafe";
+ reg = <0x01F00000 0x01D00000>;
+ read-only;
+ };
+
+ partition@0x5200000 {
+ label = "brcmnand";
+ reg = <0x05200000 0x02E00000>;
+ };
+ };
+};
--
2.25.1
\
 
 \ /
  Last update: 2020-10-07 21:03    [W:0.125 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site