lkml.org 
[lkml]   [2020]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 09/18] dt-bindings: dma: ti: Add document for K3 BCDMA
On Wed, Oct 07, 2020 at 12:09:06PM +0300, Peter Ujfalusi wrote:
>
>
> On 06/10/2020 22.29, Rob Herring wrote:
> > On Wed, Sep 30, 2020 at 12:14:03PM +0300, Peter Ujfalusi wrote:
> >> New binding document for
> >> Texas Instruments K3 Block Copy DMA (BCDMA).
> >>
> >> BCDMA is introduced as part of AM64.
> >>
>
> ...
>
> >
> >> + ti,sci:
> >> + description: phandle to TI-SCI compatible System controller node
> >> + allOf:
> >> + - $ref: /schemas/types.yaml#/definitions/phandle
> >> +
> >> + ti,sci-dev-id:
> >> + description: TI-SCI device id of BCDMA
> >> + allOf:
> >> + - $ref: /schemas/types.yaml#/definitions/uint32
> >
> > We have a common definition for these.
>
> Yes, in arm/keystone/ti,k3-sci-common.yaml, but I could not get to use
> that as reference.
>
> I can not list it under the topmost allOf and drop the ti,sci and
> ti,sci-dev-id like this:
>
> allOf:
> - $ref: /schemas/dma/dma-controller.yaml#
> - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
>
> It results:
> CHKDT Documentation/devicetree/bindings/processed-schema-examples.json
> DTEX Documentation/devicetree/bindings/dma/ti/k3-bcdma.example.dts
> SCHEMA Documentation/devicetree/bindings/processed-schema-examples.json
> DTC Documentation/devicetree/bindings/dma/ti/k3-bcdma.example.dt.yaml
> CHECK Documentation/devicetree/bindings/dma/ti/k3-bcdma.example.dt.yaml
> Documentation/devicetree/bindings/dma/ti/k3-bcdma.example.dt.yaml:
> dma-controller@485c0100: 'ti,sci', 'ti,sci-dev-id' do not match any of
> the regexes: 'pinctrl-[0-9]+'
> From schema: Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
>
> If I remove the "additionalProperties: false" from the schema file, then
> it compiles fine.

Yeah, you have to do 'unevaluatedProperties: false' which doesn't
actually do anything yet, but can 'see' into $ref's.


> >> + ti,asel:
> >> + description: ASEL value for non slave channels
> >> + allOf:
> >
> > You no longer need 'allOf' here.
>
> OK, I changed it in all instances.
>
> >
> >> + - $ref: /schemas/types.yaml#/definitions/uint32
> >> +
> >> + ti,sci-rm-range-bchan:
> >> + description: |
> >> + Array of BCDMA block-copy channel resource subtypes for resource
> >> + allocation for this host
> >> + allOf:
> >> + - $ref: /schemas/types.yaml#/definitions/uint32-array
> >> + minItems: 1
> >> + # Should be enough
> >> + maxItems: 255
> >
> > Are there constraints for the individual elements?
>
> In practice the subtype ID is 6bits number.
> Should I add limits to individual elements?

Yes:

items:
maximum: 0x3f

>
> >> +
> >> + ti,sci-rm-range-tchan:
> >> + description: |
> >> + Array of BCDMA split tx channel resource subtypes for resource allocation
> >> + for this host
> >> + allOf:
> >> + - $ref: /schemas/types.yaml#/definitions/uint32-array
> >> + minItems: 1
> >> + # Should be enough
> >> + maxItems: 255
> >> +
> >> + ti,sci-rm-range-rchan:
> >> + description: |
> >> + Array of BCDMA split rx channel resource subtypes for resource allocation
> >> + for this host
> >> + allOf:
> >> + - $ref: /schemas/types.yaml#/definitions/uint32-array
> >> + minItems: 1
> >> + # Should be enough
> >> + maxItems: 255
> >> +
> >> +required:
> >> + - compatible
> >> + - "#address-cells"
> >> + - "#size-cells"
> >> + - "#dma-cells"
> >> + - reg
> >> + - reg-names
> >> + - msi-parent
> >> + - ti,sci
> >> + - ti,sci-dev-id
> >> + - ti,sci-rm-range-bchan
> >> + - ti,sci-rm-range-tchan
> >> + - ti,sci-rm-range-rchan
> >> +
> >> +additionalProperties: false
> >> +
> >> +examples:
> >> + - |+
> >> + cbass_main {
> >> + #address-cells = <2>;
> >> + #size-cells = <2>;
> >> +
> >> + main_dmss {
> >> + compatible = "simple-mfd";
> >
> > IMO, if it is memory-mapped, then you should be using 'simple-bus'.
>
> We had the same discussion when I introduced the k3-udma binding and we
> have concluded on the simple-mfd as DMSS is not a bus, but contains
> different peripherals.

Ok.

Rob

\
 
 \ /
  Last update: 2020-10-07 17:47    [W:0.254 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site