lkml.org 
[lkml]   [2020]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] ASoC: stm32: dfsdm: change rate limits
Date
The DFSDM can support a larger rate range than currently
supported in driver.
Increase rate upper limit to 48kHz and allow all rates
in the range 8kHz to 48kHz.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
---
sound/soc/stm/stm32_adfsdm.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/sound/soc/stm/stm32_adfsdm.c b/sound/soc/stm/stm32_adfsdm.c
index ec27c13af04f..c4031988f981 100644
--- a/sound/soc/stm/stm32_adfsdm.c
+++ b/sound/soc/stm/stm32_adfsdm.c
@@ -47,9 +47,6 @@ static const struct snd_pcm_hardware stm32_adfsdm_pcm_hw = {
SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_PAUSE,
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE,

- .rate_min = 8000,
- .rate_max = 32000,
-
.channels_min = 1,
.channels_max = 1,

@@ -143,8 +140,9 @@ static const struct snd_soc_dai_driver stm32_adfsdm_dai = {
.channels_max = 1,
.formats = SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_S32_LE,
- .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |
- SNDRV_PCM_RATE_32000),
+ .rates = SNDRV_PCM_RATE_CONTINUOUS,
+ .rate_min = 8000,
+ .rate_max = 48000,
},
.ops = &stm32_adfsdm_dai_ops,
};
--
2.17.1
\
 
 \ /
  Last update: 2020-10-07 17:36    [W:0.035 / U:0.856 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site