lkml.org 
[lkml]   [2020]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next] net: dsa: microchip: add ksz9563 to ksz9477 I2C driver
On Wed, Oct 07, 2020 at 03:13:15PM +0200, Christian Eggers wrote:
> Hi Andrew,
>
> > What chip_id values does it use? I don't see it listed in
> > ksz9477_switch_chips.
>
> here a short dump of the first chip registers:
>
> > Chip ID0 00
> > Chip ID1_2 9893 Chip ID 9893
> > Chip ID3 60 Revision ID 6 Reset normal
> > Chip ID4 1C SKU ID 1C
>
> In ksz9477_switch_detect(), the 32 bit value is built from only
> the 2 middle bytes: 0x00989300. The number of port (3) is also
> assigned within this function:
>
> > if ((id_lo & 0xf) == 3) {
> > /* Chip is from KSZ9893 design. */
> > dev->features |= IS_9893;
> > /* Chip does not support gigabit. */
> > if (data8 & SW_QW_ABLE)
> > dev->features &= ~GBIT_SUPPORT;
> > dev->mib_port_cnt = 3;
> > dev->phy_port_cnt = 2;
> > } ...
>
> The chip id 0x00989300 does already exist in ksz9477_switch_chips:
>
> > {
> > .chip_id = 0x00989300,
> > .dev_name = "KSZ9893",

O.K. Thanks. This is not very clear. Maybe add a follow up patch which
adds some comments?

Andrew

\
 
 \ /
  Last update: 2020-10-07 15:20    [W:0.035 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site