lkml.org 
[lkml]   [2020]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 1/4] x86/signal: Introduce helpers to get the maximum signal frame size
On Tue, Oct 06, 2020 at 05:45:24PM +0000, Bae, Chang Seok wrote:
> On Mon, 2020-10-05 at 14:42 +0100, Dave Martin wrote:
> > On Tue, Sep 29, 2020 at 01:57:43PM -0700, Chang S. Bae wrote:
> > >
> > > +/*
> > > + * The FP state frame contains an XSAVE buffer which must be 64-byte aligned.
> > > + * If a signal frame starts at an unaligned address, extra space is required.
> > > + * This is the max alignment padding, conservatively.
> > > + */
> > > +#define MAX_XSAVE_PADDING 63UL
> > > +
> > > +/*
> > > + * The frame data is composed of the following areas and laid out as:
> > > + *
> > > + * -------------------------
> > > + * | alignment padding |
> > > + * -------------------------
> > > + * | (f)xsave frame |
> > > + * -------------------------
> > > + * | fsave header |
> > > + * -------------------------
> > > + * | siginfo + ucontext |
> > > + * -------------------------
> > > + */
> > > +
> > > +/* max_frame_size tells userspace the worst case signal stack size. */
> > > +static unsigned long __ro_after_init max_frame_size;
> > > +
> > > +void __init init_sigframe_size(void)
> > > +{
> > > + /*
> > > + * Use the largest of possible structure formats. This might
> > > + * slightly oversize the frame for 64-bit apps.
> > > + */
> > > +
> > > + if (IS_ENABLED(CONFIG_X86_32) ||
> > > + IS_ENABLED(CONFIG_IA32_EMULATION))
> > > + max_frame_size = max((unsigned long)SIZEOF_sigframe_ia32,
> > > + (unsigned long)SIZEOF_rt_sigframe_ia32);
> > > +
> > > + if (IS_ENABLED(CONFIG_X86_X32_ABI))
> > > + max_frame_size = max(max_frame_size, (unsigned long)SIZEOF_rt_sigframe_x32);
> > > +
> > > + if (IS_ENABLED(CONFIG_X86_64))
> > > + max_frame_size = max(max_frame_size, (unsigned long)SIZEOF_rt_sigframe);
> > > +
> > > + max_frame_size += fpu__get_fpstate_sigframe_size() + MAX_XSAVE_PADDING;
> >
> > For arm64, we round the worst-case padding up by one.
> >
>
> Yeah, I saw that. The ARM code adds the max padding, too:
>
> signal_minsigstksz = sigframe_size(&user) +
> round_up(sizeof(struct frame_record), 16) +
> 16; /* max alignment padding */
>
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/kernel/signal.c#n973
>
> > I can't remember the full rationale for this, but it at least seemed a
> > bit weird to report a size that is not a multiple of the alignment.
> >
>
> Because the last state size of XSAVE may not be 64B aligned, the (reported)
> sum of xstate size here does not guarantee 64B alignment.
>
> > I'm can't think of a clear argument as to why it really matters, though.
>
> We care about the start of XSAVE buffer for the XSAVE instructions, to be
> 64B-aligned.

Ah, I see. That makes sense.

For arm64, there is no additional alignment padding inside the frame,
only the padding inserted after the frame to ensure that the base
address is 16-byte aligned.

However, I wonder whether people will tend to assume that AT_MINSIGSTKSZ
is a sensible (if minimal) amount of stack to allocate. Allocating an
odd number of bytes, or any amount that isn't a multiple of the
architecture's preferred (or mandated) stack alignment probably doesn't
make sense.

AArch64 has a mandatory stack alignment of 16 bytes; I'm not sure about
x86.

Cheers
---Dave

\
 
 \ /
  Last update: 2020-10-07 12:06    [W:0.057 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site