lkml.org 
[lkml]   [2020]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v2 1/6] mfd: intel-m10-bmc: support for MAX10 BMC Security Engine
From
Date


On 10/6/20 9:34 AM, Tom Rix wrote:
> On 10/2/20 6:24 PM, Russ Weight wrote:
>> Add macros and definitions required by the MAX10 BMC
>> Security Engine driver.
>>
>> Signed-off-by: Russ Weight <russell.h.weight@intel.com>
>> ---
>> v2:
>> - These functions and macros were previously distributed among
>> the patches that needed them. They are now grouped together
>> in a single patch containing changes to the Intel MAX10 BMC
>> driver.
>> - Added DRBL_ prefix to some definitions
>> - Some address definitions were moved here from the .c files that
>> use them.
>> ---
>> include/linux/mfd/intel-m10-bmc.h | 134 ++++++++++++++++++++++++++++++
>> 1 file changed, 134 insertions(+)
>>
>> diff --git a/include/linux/mfd/intel-m10-bmc.h b/include/linux/mfd/intel-m10-bmc.h
>> index c8ef2f1654a4..880f907302eb 100644
>> --- a/include/linux/mfd/intel-m10-bmc.h
>> +++ b/include/linux/mfd/intel-m10-bmc.h
>> @@ -13,6 +13,9 @@
>> #define M10BMC_SYS_BASE 0x300800
>> #define M10BMC_MEM_END 0x200000fc
>>
>> +#define M10BMC_STAGING_BASE 0x18000000
>> +#define M10BMC_STAGING_SIZE 0x3800000
> The staging size is not used, please use it in m10bmc_sec_write_blk to
>
> check the input parameter 'size'

It is used to check the input size in the prepare function:
m10bmc_sec_prepare()

        if (smgr->remaining_size > M10BMC_STAGING_SIZE)
                return FPGA_SEC_ERR_INVALID_SIZE;

- Russ

>
>> +
>> /* Register offset of system registers */
>> #define NIOS2_FW_VERSION 0x0
>> #define M10BMC_TEST_REG 0x3c
>> @@ -21,6 +24,88 @@
>> #define M10BMC_VER_PCB_INFO_MSK GENMASK(31, 24)
>> #define M10BMC_VER_LEGACY_INVALID 0xffffffff
>>
>> +/* Secure update doorbell register, in system register region */
>> +#define M10BMC_DOORBELL 0x400
>> +
>> +/* Authorization Result register, in system register region */
>> +#define M10BMC_AUTH_RESULT 0x404
>> +
>> +/* Doorbell register fields */
>> +#define DRBL_RSU_REQUEST BIT(0)
>> +#define DRBL_RSU_PROGRESS GENMASK(7, 4)
>> +#define DRBL_HOST_STATUS GENMASK(11, 8)
>> +#define DRBL_RSU_STATUS GENMASK(23, 16)
>> +#define DRBL_PKVL_EEPROM_LOAD_SEC BIT(24)
>> +#define DRBL_PKVL1_POLL_EN BIT(25)
>> +#define DRBL_PKVL2_POLL_EN BIT(26)
> PKVL seems like it would be n3000 specific.
>
> For this and similar it may be good to add a _N3000_ in the name.
>
>> +#define DRBL_CONFIG_SEL BIT(28)
>> +#define DRBL_REBOOT_REQ BIT(29)
>> +#define DRBL_REBOOT_DISABLED BIT(30)
>> +
>> +/* Progress states */
>> +#define RSU_PROG_IDLE 0x0
>> +#define RSU_PROG_PREPARE 0x1
>> +#define RSU_PROG_READY 0x3
>> +#define RSU_PROG_AUTHENTICATING 0x4
>> +#define RSU_PROG_COPYING 0x5
>> +#define RSU_PROG_UPDATE_CANCEL 0x6
>> +#define RSU_PROG_PROGRAM_KEY_HASH 0x7
>> +#define RSU_PROG_RSU_DONE 0x8
>> +#define RSU_PROG_PKVL_PROM_DONE 0x9
>> +
>> +/* Device and error states */
>> +#define RSU_STAT_NORMAL 0x0
>> +#define RSU_STAT_TIMEOUT 0x1
>> +#define RSU_STAT_AUTH_FAIL 0x2
>> +#define RSU_STAT_COPY_FAIL 0x3
>> +#define RSU_STAT_FATAL 0x4
>> +#define RSU_STAT_PKVL_REJECT 0x5
>> +#define RSU_STAT_NON_INC 0x6
>> +#define RSU_STAT_ERASE_FAIL 0x7
>> +#define RSU_STAT_WEAROUT 0x8
>> +#define RSU_STAT_NIOS_OK 0x80
>> +#define RSU_STAT_USER_OK 0x81
>> +#define RSU_STAT_FACTORY_OK 0x82
>> +#define RSU_STAT_USER_FAIL 0x83
>> +#define RSU_STAT_FACTORY_FAIL 0x84
>> +#define RSU_STAT_NIOS_FLASH_ERR 0x85
>> +#define RSU_STAT_FPGA_FLASH_ERR 0x86
>> +
>> +#define HOST_STATUS_IDLE 0x0
>> +#define HOST_STATUS_WRITE_DONE 0x1
>> +#define HOST_STATUS_ABORT_RSU 0x2
>> +
>> +#define rsu_prog(doorbell) FIELD_GET(DRBL_RSU_PROGRESS, doorbell)
>> +#define rsu_stat(doorbell) FIELD_GET(DRBL_RSU_STATUS, doorbell)
>> +
>> +/* interval 100ms and timeout 5s */
>> +#define NIOS_HANDSHAKE_INTERVAL_US (100 * 1000)
>> +#define NIOS_HANDSHAKE_TIMEOUT_US (5 * 1000 * 1000)
>> +
>> +/* RSU PREP Timeout (2 minutes) to erase flash staging area */
>> +#define RSU_PREP_INTERVAL_MS 100
>> +#define RSU_PREP_TIMEOUT_MS (2 * 60 * 1000)
>> +
>> +/* RSU Complete Timeout (40 minutes) for full flash update */
>> +#define RSU_COMPLETE_INTERVAL_MS 1000
>> +#define RSU_COMPLETE_TIMEOUT_MS (40 * 60 * 1000)
> minutes is an unusual timeout unit.
>
> It may be worthwhile to spell out MINUTES to avoid confusing with micro seconds.
>
> Tom
>
>> +
>> +/* Addresses for security related data in FLASH */
>> +#define BMC_REH_ADDR 0x17ffc004
>> +#define BMC_PROG_ADDR 0x17ffc000
>> +#define BMC_PROG_MAGIC 0x5746
>> +
>> +#define SR_REH_ADDR 0x17ffd004
>> +#define SR_PROG_ADDR 0x17ffd000
>> +#define SR_PROG_MAGIC 0x5253
>> +
>> +#define PR_REH_ADDR 0x17ffe004
>> +#define PR_PROG_ADDR 0x17ffe000
>> +#define PR_PROG_MAGIC 0x5250
>> +
>> +/* Address of inverted bit vector containing user the image FLASH count */
>> +#define USER_FLASH_COUNT 0x17ffb000
>> +
>> /**
>> * struct intel_m10bmc - Intel MAX 10 BMC parent driver data structure
>> * @dev: this device
>> @@ -35,7 +120,11 @@ struct intel_m10bmc {
>> * register access helper functions.
>> *
>> * m10bmc_raw_read - read m10bmc register per addr
>> + * m10bmc_raw_bulk_read - bulk read max10 registers per addr
>> + * m10bmc_raw_bulk_write - bulk write max10 registers per addr
>> + * m10bmc_raw_update_bits - update max10 register per addr
>> * m10bmc_sys_read - read m10bmc system register per offset
>> + * m10bmc_sys_update_bits - update max10 system register per offset
>> */
>> static inline int
>> m10bmc_raw_read(struct intel_m10bmc *m10bmc, unsigned int addr,
>> @@ -51,6 +140,48 @@ m10bmc_raw_read(struct intel_m10bmc *m10bmc, unsigned int addr,
>> return ret;
>> }
>>
>> +static inline int
>> +m10bmc_raw_bulk_read(struct intel_m10bmc *m10bmc, unsigned int addr,
>> + void *val, size_t cnt)
>> +{
>> + int ret;
>> +
>> + ret = regmap_bulk_read(m10bmc->regmap, addr, val, cnt);
>> + if (ret)
>> + dev_err(m10bmc->dev, "fail to read raw reg %x cnt %zx: %d\n",
>> + addr, cnt, ret);
>> +
>> + return ret;
>> +}
>> +
>> +static inline int
>> +m10bmc_raw_bulk_write(struct intel_m10bmc *m10bmc, unsigned int addr,
>> + void *val, size_t cnt)
>> +{
>> + int ret;
>> +
>> + ret = regmap_bulk_write(m10bmc->regmap, addr, val, cnt);
>> + if (ret)
>> + dev_err(m10bmc->dev, "fail to write raw reg %x cnt %zx: %d\n",
>> + addr, cnt, ret);
>> +
>> + return ret;
>> +}
>> +
>> +static inline int
>> +m10bmc_raw_update_bits(struct intel_m10bmc *m10bmc, unsigned int addr,
>> + unsigned int msk, unsigned int val)
>> +{
>> + int ret;
>> +
>> + ret = regmap_update_bits(m10bmc->regmap, addr, msk, val);
>> + if (ret)
>> + dev_err(m10bmc->dev, "fail to update raw reg %x: %d\n",
>> + addr, ret);
>> +
>> + return ret;
>> +}
>> +
>> /*
>> * The base of the system registers could be configured by HW developers, and
>> * in HW SPEC, the base is not added to the addresses of the system registers.
>> @@ -62,4 +193,7 @@ m10bmc_raw_read(struct intel_m10bmc *m10bmc, unsigned int addr,
>> #define m10bmc_sys_read(m10bmc, offset, val) \
>> m10bmc_raw_read(m10bmc, M10BMC_SYS_BASE + (offset), val)
>>
>> +#define m10bmc_sys_update_bits(m10bmc, offset, msk, val) \
>> + m10bmc_raw_update_bits(m10bmc, M10BMC_SYS_BASE + (offset), msk, val)
>> +
>> #endif /* __MFD_INTEL_M10_BMC_H */

\
 
 \ /
  Last update: 2020-10-08 02:53    [W:0.130 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site