lkml.org 
[lkml]   [2020]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2] mmc: sdhci-acpi: AMDI0040: Allow changing HS200/HS400 driver strength
On Mon, 5 Oct 2020 at 14:50, Ulf Hansson <ulf.hansson@linaro.org> wrote:
>
> On Mon, 28 Sep 2020 at 23:59, Raul E Rangel <rrangel@chromium.org> wrote:
> >
> > This change will allow platform designers better control over signal
> > integrity by allowing them to tune the HS200 and HS400 driver strengths.
> >
> > The driver strength was previously hard coded to A to solve boot
> > problems with certain platforms. This driver strength does not
> > universally apply to all platforms so we need a knob to adjust it.
> >
> > All older platforms currently have the SDR104 preset hard coded to A in
> > the firmware. This means that switching from the hard coded value in
> > the kernel to reading the SDR104 preset is a no-op for these platforms.
> > Newer platforms will have properly set presets. So this change will
> > support both new and old platforms.
> >
> > Signed-off-by: Raul E Rangel <rrangel@chromium.org>
>
> Applied for next, thanks!

Turned out that this doesn't build, hence I am dropping it from my
next branch. Please submit a new version.

[...]

Kind regards
Uffe

\
 
 \ /
  Last update: 2020-10-06 11:41    [W:0.079 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site