lkml.org 
[lkml]   [2020]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1] ARM: dts: imx6/7: sync fsl,stop-mode with current flexcan driver
On Fri, Oct 16, 2020 at 09:51:58AM +0200, Oleksij Rempel wrote:
> After this patch we need 2 arguments less for the fsl,stop-mode
> property:
>
> | commit d9b081e3fc4bdc33e672dcb7bb256394909432fc
> | Author: Marc Kleine-Budde <mkl@pengutronix.de>
> | Date: Sun Jun 14 21:09:20 2020 +0200
> |
> | can: flexcan: remove ack_grp and ack_bit handling from driver
> |
> | Since commit:
> |
> | 048e3a34a2e7 can: flexcan: poll MCR_LPM_ACK instead of GPR ACK for stop mode acknowledgment
> |
> | the driver polls the IP core's internal bit MCR[LPM_ACK] as stop mode
> | acknowledge and not the acknowledgment on chip level.
> |
> | This means the 4th and 5th value of the property "fsl,stop-mode" isn't used
> | anymore. This patch removes the used "ack_gpr" and "ack_bit" from the driver.
>
> This patch removes the two last arguments, as they are not needed
> anymore.
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
>
> # Please enter the commit message for your changes. Lines starting

It shouldn't be here.

Fixed it up and applied the patch.

Shawn

\
 
 \ /
  Last update: 2020-10-31 09:35    [W:0.050 / U:1.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site