lkml.org 
[lkml]   [2020]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v4 7/7] mtd: spi-nor: macronix: Add Octal 8D-8D-8D supports for Macronix mx25uw51245g
Date
Hi, Mason, YC Lin,

On 5/29/20 10:36 AM, Mason Yang wrote:
> Macronix mx25uw51245g is a SPI NOR that supports 1-1-1/8-8-8 mode.
>
> Correct the dummy cycles to device for various frequencies
> after xSPI profile 1.0 table parsed.
>
> Enable mx25uw51245g to Octal DTR mode by executing the command sequences
> to change to octal DTR mode.
>
> Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
> ---
> drivers/mtd/spi-nor/macronix.c | 55 ++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 55 insertions(+)
>
> diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c
> index 96735d8..6c9a24c 100644
> --- a/drivers/mtd/spi-nor/macronix.c
> +++ b/drivers/mtd/spi-nor/macronix.c
> @@ -8,6 +8,57 @@
>
> #include "core.h"
>
> +#define MXIC_CR2_DUMMY_SET_ADDR 0x300
> +
> +/* Fixup the dummy cycles to device and setup octa_dtr_enable() */
> +static void mx25uw51245g_post_sfdp_fixups(struct spi_nor *nor)
> +{
> + struct spi_nor_flash_parameter *params = nor->params;
> + int ret;
> + u8 rdc, wdc;
> +
> + ret = spi_nor_read_cr2(nor, MXIC_CR2_DUMMY_SET_ADDR, &rdc);

nor->bouncebuf is DMA-able, use it instead of rdc

> + if (ret)
> + return;
> +
> + /* Refer to dummy cycle and frequency table(MHz) */
> + switch (params->dummy_cycles) {
> + case 10: /* 10 dummy cycles for 104 MHz */
> + wdc = 5;
> + break;
> + case 12: /* 12 dummy cycles for 133 MHz */
> + wdc = 4;
> + break;
> + case 16: /* 16 dummy cycles for 166 MHz */
> + wdc = 2;
> + break;
> + case 18: /* 18 dummy cycles for 173 MHz */
> + wdc = 1;
> + break;
> + case 20: /* 20 dummy cycles for 200 MHz */
> + default:
> + wdc = 0;
> + }
> +
> + if (rdc != wdc)
> + spi_nor_write_cr2(nor, MXIC_CR2_DUMMY_SET_ADDR, &wdc);
> +
> + if (params->cmd_seq[0].len) {
> + params->octal_dtr_enable = spi_nor_cmd_seq_octal_dtr;
> + params->hwcaps.mask |= SNOR_HWCAPS_READ_8_8_8_DTR;
> + params->hwcaps.mask |= SNOR_HWCAPS_PP_8_8_8_DTR;
> +
> + } else {
> + params->octal_dtr_enable = NULL;
> + params->hwcaps.mask &= ~SNOR_HWCAPS_READ_8_8_8_DTR;
> + params->hwcaps.mask &= ~SNOR_HWCAPS_PP_8_8_8_DTR;
> + }
> +}
> +
> +static struct spi_nor_fixups mx25uw51245g_fixups = {
> + .post_sfdp = mx25uw51245g_post_sfdp_fixups,
> +};
> +
> static int
> mx25l25635_post_bfpt_fixups(struct spi_nor *nor,
> const struct sfdp_parameter_header *bfpt_header,
> @@ -84,6 +135,10 @@
> SPI_NOR_QUAD_READ) },
> { "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048,
> SPI_NOR_QUAD_READ) },
> + { "mx25uw51245g", INFO(0xc2813a, 0, 64 * 1024, 1024,
> + SECT_4K | SPI_NOR_4B_OPCODES |
> + SPI_NOR_OCTAL_DTR_READ)

octal dtr page program is supported?

> + .fixups = &mx25uw51245g_fixups },
> };
>
> static void macronix_default_init(struct spi_nor *nor)
>

Cheers,
ta
\
 
 \ /
  Last update: 2020-10-28 23:29    [W:0.325 / U:2.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site