lkml.org 
[lkml]   [2020]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] clk: imx: gate2: Fix the is_enabled op
On Wed, Oct 28, 2020 at 11:50:57AM +0200, Abel Vesa wrote:
> On 20-10-28 09:24:12, Sascha Hauer wrote:
> > Hi Abel,
> >
> > On Mon, Oct 26, 2020 at 08:50:48PM +0200, Abel Vesa wrote:
> > > The clock is considered to be enabled only if the controlling bits
> > > match the cgr_val mask. Also make sure the is_enabled returns the
> > > correct vaule by locking the access to the register.
> > >
> > > Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
> > > Fixes: 1e54afe9fcfe ("clk: imx: gate2: Allow single bit gating clock")
> > > ---
> > > drivers/clk/imx/clk-gate2.c | 60 ++++++++++++++++++++-------------------------
> > > drivers/clk/imx/clk.h | 8 ++----
> > > 2 files changed, 29 insertions(+), 39 deletions(-)
> > >
> > > diff --git a/drivers/clk/imx/clk-gate2.c b/drivers/clk/imx/clk-gate2.c
> > > index 7eed708..f320bd2b 100644
> > > --- a/drivers/clk/imx/clk-gate2.c
> > > +++ b/drivers/clk/imx/clk-gate2.c
> > > @@ -37,10 +37,22 @@ struct clk_gate2 {
> > >
> > > #define to_clk_gate2(_hw) container_of(_hw, struct clk_gate2, hw)
> > >
> > > +static void clk_gate2_do_shared_clks(struct clk_hw *hw, bool enable)
> > > +{
> > > + struct clk_gate2 *gate = to_clk_gate2(hw);
> > > + u32 reg;
> > > +
> > > + reg = readl(gate->reg);
> > > + if (enable)
> > > + reg |= gate->cgr_val << gate->bit_idx;
> > > + else
> > > + reg &= ~(gate->cgr_val << gate->bit_idx);
> >
> > Shouldn't this be:
> >
> > reg &= ~(3 << gate->bit_idx);
> > if (enable)
> > reg |= gate->cgr_val << gate->bit_idx;
> >
> > At least that's how it was without this patch and that's how it makes
> > sense to me with cgr_val != 3.
> >
>
> Well, that's the actual problem. The value 3 forces all the clocks
> that register with this clock type to have 2 bits for controlling the gate.
>
> My patch (though now I think I should split it into 2 separate patches) allows
> two HW gates to be controlled by as many bits necessary. For example, there
> could be multiple HW gates that are controled by the same bit. By passing
> the cgr_val when registering the clocks you can specify how many bits (as a mask)
> control all those HW gates that share their control bits.

cgr_val is not a mask, it's a value that shall be written to the two
bits to enable the clock. cgr_val could also be 0b10, see imx_clk_gate2_cgr().

Sascha

--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

\
 
 \ /
  Last update: 2020-10-28 23:09    [W:0.679 / U:0.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site