lkml.org 
[lkml]   [2020]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] clk: samsung: exynos-clkout: convert to module driver
On Thu, Oct 01, 2020 at 06:56:46PM +0200, Krzysztof Kozlowski wrote:
> The Exynos clkout driver depends on board input clock (typically XXTI or
> XUSBXTI), however on Exynos4 boards these clocks were modeled as part of
> SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but
> correcting it would break DT backward compatibility.
>
> Both drivers - clkout and Exynos4 clocks - register the clock providers
> with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the
> Makefile clkout is behind Exynos4 clock). It will work only if the
> Exynos4 clock driver comes up before clkout.
>
> A change in DTS adding input clock reference to Exynos4 clocks input
> PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input
> clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout
> appeared before Exynos4 clock provider. Since clkout depends on Exynos4
> clocks and does not support deferred probe, this did not work and caused
> later failure of usb3503 USB hub probe which needs clkout:
>
> [ 5.007442] usb3503 0-0008: unable to request refclk (-517)
>
> The Exynos clkout driver is not a critical/core clock so there is
> actually no problem in instantiating it later, as a regular module.
> This removes specific probe ordering and adds support for probe
> deferral.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
> drivers/clk/samsung/clk-exynos-clkout.c | 198 +++++++++++++++++-------
> 1 file changed, 141 insertions(+), 57 deletions(-)

Applied (with fixes pointed out by Sylwester).

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2020-10-28 23:08    [W:0.072 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site