lkml.org 
[lkml]   [2020]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [tip: x86/seves] x86/kvm: Add KVM-specific VMMCALL handling under SEV-ES
I might be missing something here but I think what you say is only
correct for the kvm_hypercall4 cases. All other functions use a
smaller number of registers. #VC blindly assumes that all those
registers are used in the vmcall and exposes them. Here are some
examples:

For example in the kvm_hypercall2 only rax, rbx, and rcx should be
exposed. apic_id address is leaked with rdx when this hypercall is
used in kvm_kick_cpu function. RSI is never used. I am not sure what
value will be exposed to VMM in this case:

54 static inline long kvm_hypercall2(unsigned int nr, unsigned long p1,
55 unsigned long p2)
56 {
57 long ret;
58 asm volatile(KVM_HYPERCALL
59 : "=a"(ret)
60 : "a"(nr), "b"(p1), "c"(p2)
61 : "memory");
62 return ret;
63 }
And this function is called in :

820 static void kvm_kick_cpu(int cpu)
821 {
822 int apicid;
823 unsigned long flags = 0;
824
825 apicid = per_cpu(x86_cpu_to_apicid, cpu);
826 kvm_hypercall2(KVM_HC_KICK_CPU, flags, apicid);
827 }

looking to what it is compiled in my machine :

151215 ffffffff8105def0 <kvm_kick_cpu>:
151216 {
151217 ffffffff8105def0: e8 fb 9e ff ff callq
ffffffff81057df0 <__fentry__>
151218 apicid = per_cpu(x86_cpu_to_apicid, cpu);
151219 ffffffff8105def5: 48 63 ff movslq %edi,%rdi
151220 {
151221 ffffffff8105def8: 53 push %rbx
151222 apicid = per_cpu(x86_cpu_to_apicid, cpu);
151223 ffffffff8105def9: 48 c7 c0 58 16 01 00 mov $0x11658,%rax
151224
151225 static inline long kvm_hypercall2(unsigned int nr, unsigned long p1,
151226 unsigned long p2)
151227 {
151228 long ret;
151229 asm volatile(KVM_HYPERCALL
151230 ffffffff8105df00: 31 db xor %ebx,%ebx
151231 ffffffff8105df02: 48 8b 14 fd 00 19 cb mov
-0x7e34e700(,%rdi,8),%rdx
151232 ffffffff8105df09: 81
151233 kvm_hypercall2(KVM_HC_KICK_CPU, flags, apicid);
151234 ffffffff8105df0a: 0f b7 0c 02 movzwl
(%rdx,%rax,1),%ecx
151235 ffffffff8105df0e: b8 05 00 00 00 mov $0x5,%eax
151236 ffffffff8105df13: 0f 01 c1 vmcall
151237 }
151238 ffffffff8105df16: 5b pop %rbx
151239 ffffffff8105df17: c3 retq


Similarly kvm_hypercall1 only need 2 registers to expose:

44 static inline long kvm_hypercall1(unsigned int nr, unsigned long p1)
45 {
46 long ret;
47 asm volatile(KVM_HYPERCALL
48 : "=a"(ret)
49 : "a"(nr), "b"(p1)
50 : "memory");
51 return ret;
52 }

And an example where it is used:

562 static void kvm_smp_send_call_func_ipi(const struct cpumask *mask)
563 {
564 int cpu;
565
566 native_send_call_func_ipi(mask);
567
568 /* Make sure other vCPUs get a chance to run if they need to. */
569 for_each_cpu(cpu, mask) {
570 if (vcpu_is_preempted(cpu)) {
571 kvm_hypercall1(KVM_HC_SCHED_YIELD,
per_cpu(x86_cpu_to_apicid, cpu));
572 break;
573 }
574 }
575 }

If we look at the function decompiled in my platform, here
x86_cpu_to_apicid address is leaked in rdx. RSI also leaks some
information from kvm_smp_send_call_function_ipi function. RCX is not
used so it might include something from a higher caller.

151243 ffffffff8105df20 <kvm_smp_send_call_func_ipi>:
151244 {
151245 ffffffff8105df20: e8 cb 9e ff ff callq
ffffffff81057df0 <__fentry__>
151246 ffffffff8105df25: 53 push %rbx
151247 ffffffff8105df26: 48 89 fb mov %rdi,%rbx
151248 native_send_call_func_ipi(mask);
151249 ffffffff8105df29: e8 a2 45 ff ff callq
ffffffff810524d0 <native_send_call_func_ipi>
151250 for_each_cpu(cpu, mask) {
151251 ffffffff8105df2e: 41 b8 ff ff ff ff mov $0xffffffff,%r8d
151252 ffffffff8105df34: eb 0e jmp
ffffffff8105df44 <kvm_smp_send_call_func_ipi+0x24>
151253 return PVOP_CALLEE1(bool, lock.vcpu_is_preempted, cpu);
151254 ffffffff8105df36: 49 63 f8 movslq %r8d,%rdi
151255 ffffffff8105df39: ff 14 25 90 93 02 82 callq
*0xffffffff82029390
151256 if (vcpu_is_preempted(cpu)) {
151257 ffffffff8105df40: 84 c0 test %al,%al
151258 ffffffff8105df42: 75 18 jne
ffffffff8105df5c <kvm_smp_send_call_func_ipi+0x3c>
151259 for_each_cpu(cpu, mask) {
151260 ffffffff8105df44: 44 89 c7 mov %r8d,%edi
151261 ffffffff8105df47: 48 89 de mov %rbx,%rsi
151262 ffffffff8105df4a: e8 61 44 39 00 callq
ffffffff813f23b0 <cpumask_next>
151263 ffffffff8105df4f: 3b 05 2f 7e 12 01 cmp
0x1127e2f(%rip),%eax # ffffffff82185d84 <nr_cpu_ids>
151264 ffffffff8105df55: 41 89 c0 mov %eax,%r8d
151265 ffffffff8105df58: 72 dc jb
ffffffff8105df36 <kvm_smp_send_call_func_ipi+0x16>
151266 }
151267 ffffffff8105df5a: 5b pop %rbx
151268 ffffffff8105df5b: c3 retq
151269 kvm_hypercall1(KVM_HC_SCHED_YIELD,
per_cpu(x86_cpu_to_apicid, cpu));
151270 ffffffff8105df5c: 48 8b 14 fd 00 19 cb mov
-0x7e34e700(,%rdi,8),%rdx
151271 ffffffff8105df63: 81
151272 ffffffff8105df64: 48 c7 c0 58 16 01 00 mov $0x11658,%rax
151273 ffffffff8105df6b: 0f b7 1c 02 movzwl
(%rdx,%rax,1),%ebx
151274 asm volatile(KVM_HYPERCALL
151275 ffffffff8105df6f: b8 0b 00 00 00 mov $0xb,%eax
151276 ffffffff8105df74: 0f 01 c1 vmcall
151277 }

I am not sure how those leaked registers can be used, but depending on
which function call hypercall[0-3], there will be some leak.

-Erdem



On Wed, Oct 28, 2020 at 2:49 AM Joerg Roedel <jroedel@suse.de> wrote:
>
> On Tue, Oct 27, 2020 at 04:14:15PM -0700, Erdem Aktas wrote:
> > It seems to me that the kvm_sev_es_hcall_prepare is leaking more
> > information than it is needed. Is this an expected behavior?
>
> What exactly is leaked? The kvm hypercall uses RAX, RBX, RCX, RDX and
> RSI for parameters.
>
> Regards,
>
> Joerg

\
 
 \ /
  Last update: 2020-10-28 23:05    [W:0.137 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site