lkml.org 
[lkml]   [2020]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] net: bonding: alb disable balance for IPv6 multicast related mac
Date
LIU Yulong <i@liuyulong.me> wrote:

>Hi Jay,
>
>
>
>Thank you for your response and review. Please see my inline comments.

I'm still reviewing your commentary, but to answer your final
question regarding updating the patch, you'll need to repost the entire
patch (with the new changes). This repost should change the Subject to
include "v2" in the PATCH brackets, and add a change log after the
signoff block. The detailed expectations are laid out in

https://www.kernel.org/doc/Documentation/process/submitting-patches.rst

-J

>
>
>>According to the RFC 2464 [1] the prefix "33:33:xx:xx:xx:xx" is defined
>to
>
>>construct the multicast destination MAC address for IPv6 multicast
>traffic.
>
>>The NDP (Neighbor Discovery Protocol for IPv6)[2] will comply with such
>
>>rule. The work steps [6] are:
>
>> *) Let's assume a destination address of 2001:db8:1:1::1.
>
>> *) This is mapped into the "Solicited Node Multicast Address" (SNMA)
>
>> format of ff02::1:ffXX:XXXX.
>
>> *) The XX:XXXX represent the last 24 bits of the SNMA, and are derived
>
>> directly from the last 24 bits of the destination address.
>
>> *) Resulting in a SNMA ff02::1:ff00:0001, or ff02::1:ff00:1.
>
>> *) This, being a multicast address, can be mapped to a multicast MAC
>
>> address, using the format 33-33-XX-XX-XX-XX
>
>> *) Resulting in 33-33-ff-00-00-01.
>
>> *) This is a MAC address that is only being listened for by nodes
>
>> sharing the same last 24 bits.
>
>> *) In other words, while there is a chance for a "address collision",
>
>> it is a vast improvement over ARP's guaranteed "collision".
>
>>Kernel related code can be found at [3][4][5].
>
>>
>
>
>
>>The current bond alb has some leaks of such MAC ranges which will cause
>
>>the physical world failed to determain the back tunnel of the reply
>
>>packet during the response in a Spine-and-Leaf data center architecture.
>
>>The basic topology looks like this:
>
>>
>
>
>
>> +-------------+
>
>> | |
>
>> +---| Border Leaf |-----+
>
>> | | | |
>
>> | +-------------+ |
>
>> | |
>
>> | tunnel-1 | tunnel-2
>
>> | |
>
>> | |
>
>>+---+----+ +------+-+
>
>>| | | |
>
>>| Leaf1 +--X-X-X-X--+ Leaf2 | tunnel-3 will be checked to prevent loop
>
>>| | tunnel-3 | |
>
>>+--------+ +-+------+
>
>> | |
>
>> | |
>
>> | |
>
>> | |
>
>> | |
>
>> | |
>
>> +----+ +----+
>
>> +--+nic1+---+nic2+---+
>
>> | +----+ +----+ |
>
>> | bond6 |
>
>> | |
>
>> | HOST |
>
>> +--------------------+
>
>
>
>>This description is, overall, very comprehensive, and I believe
>
>>I generally understand what issue you're fixing (which seems to be a
>
>>complicated means to cause MAC flapping), although I'm unclear on a few
>
>>details, below.
>
>
>
>>However, if you could make the ASCII art smaller I think that
>
>>would be better.
>
>
>
>Done, I will update.
>
>
>
>>When nic1 is sending the normal IPv6 traffic to the gateway in Border
>leaf,
>
>>the nic2 (slave) will send the NS packet out periodically, automatically
>
>>and implicitly as well. This is an example packet sending from the slave
>
>>nic2 which will broke the traffic.
>
>
>
>>With this patch applied, what would happen if nic2 sends the
>
>>normal IPv6 traffic from the source MAC in question (because it is
>
>>tx-balanced there), and the Neighbor Solicitation multicast then goes
>
>>out via nic1?
>
>
>
>Packets sent out from nic2 kernel will change the source MAC to the slave
>MAC,
>
>aka nic2's MAC, so nic2 normal traffic is just fine.
>
>Related code can be found here (I'm not pretty sure about the real code
>place, but this is what I see):
>
>https://github.com/torvalds/linux/blob/master/drivers/net/bonding/bond_alb.c#L1320
>
>
>The following MAC "ac:1f:6b:90:5c:eb" is the nic2 MAC, while the
>"fa:16:3e:ba:2d:8c"
>
>is the real packet source MAC.
>
>
>
>> ac:1f:6b:90:5c:eb > 33:33:ff:00:00:01, ethertype 802.1Q (0x8100),
>
>> length 90: vlan 205, p 0, ethertype IPv6, (hlim 255,
>
>> next-header ICMPv6 (58) payload length: 32)
>
>> fe80::f816:3eff:feba:2d8c > ff02::1:ff00:1:
>
>> [icmp6 sum ok] ICMP6, neighbor solicitation, length 32,
>
>> who has 240e:980:2f00:4000::1
>
>> source link-address option (1), length 8 (1): fa:16:3e:ba:2d:8c
>
>
>
>>And perhaps trim out the hex dump here.
>
>
>
>Done, removed.
>
>
>
>>MAC "fa:16:3e:ba:2d:8c" was first learnt at Leaf1 based on the underlay
>
>>mechanism(BGP EVPN). When this example packet was sent to Border leaf and
>
>>replied with dst_MAC "fa:16:3e:ba:2d:8c", Leaf2 will try to send packet
>
>>back to tunnel-3 at this point dropping happens because of the loop
>
>>defense. All the original normal IPv6 traffic will be lead to the
>tunnel-2
>
>>and then drop. Link is broken now.
>
>
>
>>Where does MAC fa:16:3e:ba:2d:8c come from? Is this the MAC
>
>>address of the bond itself?
>
>
>
>MAC "fa:16:3e:ba:2d:8c" was the virtual device MAC from a cloud service
>inside a kernel network namespace.
>
>
>
>>Assuming that "learnt at Leaf1" means that Leaf1 knows to
>
>>forward it to bond6:nic1, why does the loop defense drop the packet if
>
>>Leaf1 is on the forwarding path?
>
>
>
>Actually the traffic from outside world will go through the Border Leaf to
>Leaf2,
>
>then switch Leaf2 can not send packet to the tunnel-3 due to the vxlan
>related defense mechanism.
>
>This is the real drop happen.
>
>
>
>>This patch addresses such issue by check the entire MAC range defined by
>
>>the RFC 2464. Adding a new helper method to check the first two octets
>
>>are the value 3333. If the dest MAC is matched, no balance will be
>
>>enabled.
>
>>
>
>
>
>>[1] https://tools.ietf.org/html/rfc2464#section-7
>
>>[2] https://tools.ietf.org/html/rfc4861
>
>>[3] linux.git/tree/include/net/if_inet6.h#n209-n221
>
>>[4] linux.git/tree/net/ipv6/ndisc.c#n291
>
>>[5] linux.git/tree/net/ipv6/ndisc.c#n346-n348
>
>>[6] https://en.citizendium.org/wiki/Neighbor_Discovery
>
>>
>
>
>
>>Signed-off-by: LIU Yulong <i@liuyulong.me>
>
>>---
>
>> drivers/net/bonding/bond_alb.c | 10 ++++------
>
>> include/linux/etherdevice.h | 12 ++++++++++++
>
>> 2 files changed, 16 insertions(+), 6 deletions(-)
>
>>
>
>
>
>>diff --git a/drivers/net/bonding/bond_alb.c
>b/drivers/net/bonding/bond_alb.c
>
>>index 095ea51..a4a30bd 100644
>
>>--- a/drivers/net/bonding/bond_alb.c
>
>>+++ b/drivers/net/bonding/bond_alb.c
>
>>@@ -24,9 +24,6 @@
>
>> #include <net/bonding.h>
>
>> #include <net/bond_alb.h>
>
>>
>
>>-static const u8 mac_v6_allmcast[ETH_ALEN + 2] __long_aligned = {
>
>>- 0x33, 0x33, 0x00, 0x00, 0x00, 0x01
>
>>-};
>
>> static const int alb_delta_in_ticks = HZ / ALB_TIMER_TICKS_PER_SEC;
>
>>
>
>> #pragma pack(1)
>
>>@@ -1422,10 +1419,11 @@ struct slave *bond_xmit_alb_slave_get(struct
>bonding *bond,
>
>> break;
>
>> }
>
>>
>
>>- /* IPv6 uses all-nodes multicast as an equivalent to
>
>>- * broadcasts in IPv4.
>
>>+ /* IPv6 multicast destination should disable the tx-balance since
>
>>+ * the pyhsical world may get into a mass status which will lead
>
>>+ * to the IPv6 traffic broken.
>
>
>
>>I think this comment can be simplified to simply say that IPv6
>
>>multicast destinations should not be tx-balanced, which I suspect is the
>
>>real purpose.
>
>
>
>Done, I will update.
>
>
>
>> */
>
>>- if (ether_addr_equal_64bits(eth_data->h_dest, mac_v6_allmcast)) {
>
>>+ if (is_ipv6_multicast_ether_addr(eth_data->h_dest)) {
>
>> do_tx_balance = false;
>
>> break;
>
>> }
>
>>diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
>
>>index 2e5debc..c6101ab 100644
>
>>--- a/include/linux/etherdevice.h
>
>>+++ b/include/linux/etherdevice.h
>
>>@@ -178,6 +178,18 @@ static inline bool is_unicast_ether_addr(const u8
>*addr)
>
>> }
>
>>
>
>> /**
>
>>+ * is_ipv6_multicast_ether_addr - Determine if the Ethernet address is
>for
>
>>+ * IPv6 multicast (rfc2464).
>
>>+ * @addr: Pointer to a six-byte array containing the Ethernet address
>
>>+ *
>
>>+ * Return true if the address is a multicast for IPv6.
>
>>+ */
>
>>+static inline bool is_ipv6_multicast_ether_addr(const u8 *addr)
>
>>+{
>
>>+ return (addr[0] & addr[1]) == 0x33;
>
>>+}
>
>
>
>>I don't think this does what is intended. It will return true
>
>>for a MAC that starts with any two values whose bitwise AND is 0x33,
>
>>e.g., 0x73 0x3b. For IPv6 multicast, the first two octets of the MAC
>
>>must be exactly 0x33 0x33.
>
>>
>
>
>
>>-J
>
>
>
>Correct, it should be (addr[0] == 0x33) && (addr[1] == 0x33);
>
>
>
>>+
>
>>+/**
>
>> * is_valid_ether_addr - Determine if the given Ethernet address is
>valid
>
>> * @addr: Pointer to a six-byte array containing the Ethernet address
>
>> *
>
>>--
>
>>1.8.3.1
>
>
>
>
>
>I dont know how to update the patch on the mail list, so just paste the
>entire
>
>updated one below.
>
>
>
>Subject: [PATCH] net: bonding: alb disable balance for IPv6 multicast
>related
>
>mac
>
>
>
>According to the RFC 2464 [1] the prefix "33:33:xx:xx:xx:xx" is defined to
>
>construct the multicast destination MAC address for IPv6 multicast
>traffic.
>
>The NDP (Neighbor Discovery Protocol for IPv6)[2] will comply with such
>
>rule. The work steps [6] are:
>
> *) Let's assume a destination address of 2001:db8:1:1::1.
>
> *) This is mapped into the "Solicited Node Multicast Address" (SNMA)
>
> format of ff02::1:ffXX:XXXX.
>
> *) The XX:XXXX represent the last 24 bits of the SNMA, and are derived
>
> directly from the last 24 bits of the destination address.
>
> *) Resulting in a SNMA ff02::1:ff00:0001, or ff02::1:ff00:1.
>
> *) This, being a multicast address, can be mapped to a multicast MAC
>
> address, using the format 33-33-XX-XX-XX-XX
>
> *) Resulting in 33-33-ff-00-00-01.
>
> *) This is a MAC address that is only being listened for by nodes
>
> sharing the same last 24 bits.
>
> *) In other words, while there is a chance for a "address collision",
>
> it is a vast improvement over ARP's guaranteed "collision".
>
>Kernel related code can be found at [3][4][5].
>
>
>
>The current bond alb has some leaks of such MAC ranges which will cause
>
>the physical world failed to determain the back tunnel of the reply
>
>packet during the response in a Spine-and-Leaf data center architecture.
>
>The basic topology looks like this:
>
>
>
> +-------------+
>
> +---| Border Leaf |-----+
>
>tunnel-1| +-------------+ | tunnel-2
>
> | |
>
> +---+----+ +------+-+
>
> | Leaf1 +-----X-----+ Leaf2 | tunnel-3 has loop avoidance
>
> +--------+ tunnel-3 +-+------+
>
> | |
>
> +----+ +----+
>
> +--+nic1+---+nic2+---+
>
> | +----+ +----+ |
>
> | bond6 |
>
> | HOST |
>
> +--------------------+
>
>
>
>When nic1 is sending the normal IPv6 traffic to the gateway in Border
>leaf,
>
>the nic2 (slave) will send the NS packet out periodically, automatically
>
>and implicitly as well. This is an example packet sending from the slave
>
>nic2 which will broke the traffic.
>
>
>
> ac:1f:6b:90:5c:eb > 33:33:ff:00:00:01, ethertype 802.1Q (0x8100),
>
> length 90: vlan 205, p 0, ethertype IPv6, (hlim 255,
>
> next-header ICMPv6 (58) payload length: 32)
>
> fe80::f816:3eff:feba:2d8c > ff02::1:ff00:1:
>
> [icmp6 sum ok] ICMP6, neighbor solicitation, length 32,
>
> who has 240e:980:2f00:4000::1
>
> source link-address option (1), length 8 (1): fa:16:3e:ba:2d:8c
>
>
>
>The packet source MAC "ac:1f:6b:90:5c:eb" was the nic2 MAC whose original
>
>value should be "fa:16:3e:ba:2d:8c", but it was changed by alb related
>
>MAC address mechanism [8].
>
>
>
>MAC "fa:16:3e:ba:2d:8c" was the virtual device MAC from a cloud service
>
>inside a kernel network namespace, the topology is here [7].
>
>MAC "fa:16:3e:ba:2d:8c" was first learnt at Leaf1 based on the underlay
>
>mechanism(BGP EVPN). When this example packet was sent to Border leaf and
>
>replied with dst_mac "fa:16:3e:ba:2d:8c", Leaf2 will try to send packet
>
>back to tunnel-3 at this point dropping happens because of the loop
>
>defense. All the original normal IPv6 traffic will be lead to the tunnel-2
>
>and then drop. Link is broken now.
>
>
>
>This patch addresses such issue by check the entire MAC range definde by
>
>the RFC 2464. Adding a new helper method to check the first two octets
>
>are the value 3333. If the dest MAC is matched, no balance will be
>
>enabled.
>
>
>
>[1] https://tools.ietf.org/html/rfc2464#section-7
>
>[2] https://tools.ietf.org/html/rfc4861
>
>[3] linux.git/tree/include/net/if_inet6.h#n209-n221
>
>[4] linux.git/tree/net/ipv6/ndisc.c#n291
>
>[5] linux.git/tree/net/ipv6/ndisc.c#n346-n348
>
>[6] https://en.citizendium.org/wiki/Neighbor_Discovery
>
>[7]
>https://docs.openstack.org/neutron/latest/admin/deploy-ovs-selfservice.html#architecture
>
>
>[8] linux.git/tree/drivers/net/bonding/bond_alb.c#n1320
>
>
>
>Signed-off-by: LIU Yulong <i@liuyulong.me>
>
>---
>
>drivers/net/bonding/bond_alb.c | 8 ++------
>
>include/linux/etherdevice.h | 12 ++++++++++++
>
>2 files changed, 14 insertions(+), 6 deletions(-)
>
>
>
>diff --git a/drivers/net/bonding/bond_alb.c
>b/drivers/net/bonding/bond_alb.c
>
>index c3091e0..eda9046 100644
>
>--- a/drivers/net/bonding/bond_alb.c
>
>+++ b/drivers/net/bonding/bond_alb.c
>
>@@ -24,9 +24,6 @@
>
>#include <net/bonding.h>
>
>#include <net/bond_alb.h>
>
>-static const u8 mac_v6_allmcast[ETH_ALEN + 2] __long_aligned = {
>
>- 0x33, 0x33, 0x00, 0x00, 0x00, 0x01
>
>-};
>
>static const int alb_delta_in_ticks = HZ / ALB_TIMER_TICKS_PER_SEC;
>
> #pragma pack(1)
>
>@@ -1425,10 +1422,9 @@ struct slave *bond_xmit_alb_slave_get(struct
>bonding *bond,
>
> break;
>
> }
>
>- /* IPv6 uses all-nodes multicast as an equivalent to
>
>- * broadcasts in IPv4.
>
>+ /* IPv6 multicast destinations should not be tx-balanced.
>
> */
>
>- if (ether_addr_equal_64bits(eth_data->h_dest, mac_v6_allmcast)) {
>
>+ if (is_ipv6_multicast_ether_addr(eth_data->h_dest)) {
>
> do_tx_balance = false;
>
> break;
>
> }
>
>diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
>
>index 2e5debc..ac74a99 100644
>
>--- a/include/linux/etherdevice.h
>
>+++ b/include/linux/etherdevice.h
>
>@@ -178,6 +178,18 @@ static inline bool is_unicast_ether_addr(const u8
>*addr)
>
>}
>
> /**
>
>+ * is_ipv6_multicast_ether_addr - Determine if the Ethernet address is
>for
>
>+ * IPv6 multicast (rfc2464).
>
>+ * @addr: Pointer to a six-byte array containing the Ethernet address
>
>+ *
>
>+ * Return true if the address is a multicast for IPv6.
>
>+ */
>
>+static inline bool is_ipv6_multicast_ether_addr(const u8 *addr)
>
>+{
>
>+ return (addr[0] == 0x33) && (addr[1] == 0x33);
>
>+}
>
>+
>
>+/**
>
> * is_valid_ether_addr - Determine if the given Ethernet address is valid
>
> * @addr: Pointer to a six-byte array containing the Ethernet address
>
> *
>
>--
>
>1.8.3.1

\
 
 \ /
  Last update: 2020-10-29 02:46    [W:0.304 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site