lkml.org 
[lkml]   [2020]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v5 0/5] Add PCIe support for SM8250 SoC
Date
Hello,

This series adds PCIe support for Qualcomm SM8250 SoC with relevant PHYs.
There are 3 PCIe instances on this SoC each with different PHYs. The PCIe
controller and PHYs are mostly comaptible with the ones found on SDM845
SoC, hence the old drivers are modified to add the support.

This series has been tested on RB5 board with QCA6391 chipset connected
onboard.

Thanks,
Mani

Changes in v5:

* Added Review tags from Rob
* Cleaned up the bdf to sid patch after discussing with Tony

Changes in v4:

* Fixed an issue with tx_tbl_sec in PHY driver

Changes in v3:

* Rebased on top of phy/next
* Renamed ops_sm8250 to ops_1_9_0 to maintain uniformity

Changes in v2:

* Fixed the PHY and PCIe bindings
* Introduced secondary table in PHY driver to abstract out the common configs.
* Used a more generic way of configuring BDF to SID mapping
* Dropped ATU change in favor of a patch spotted by Rob

Manivannan Sadhasivam (5):
dt-bindings: phy: qcom,qmp: Add SM8250 PCIe PHY bindings
phy: qcom-qmp: Add SM8250 PCIe QMP PHYs
dt-bindings: pci: qcom: Document PCIe bindings for SM8250 SoC
PCI: qcom: Add SM8250 SoC support
PCI: qcom: Add support for configuring BDF to SID mapping for SM8250

.../devicetree/bindings/pci/qcom,pcie.txt | 6 +-
.../devicetree/bindings/phy/qcom,qmp-phy.yaml | 6 +
drivers/pci/controller/dwc/Kconfig | 1 +
drivers/pci/controller/dwc/pcie-qcom.c | 92 ++++++
drivers/phy/qualcomm/phy-qcom-qmp.c | 281 +++++++++++++++++-
drivers/phy/qualcomm/phy-qcom-qmp.h | 18 ++
6 files changed, 398 insertions(+), 6 deletions(-)

--
2.17.1

\
 
 \ /
  Last update: 2020-10-27 18:01    [W:0.081 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site