lkml.org 
[lkml]   [2020]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/4] cpufreq: intel_pstate: Avoid missing HWP max updates in passive mode
From
Date
On Fri, 2020-10-23 at 17:35 +0200, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>
> If the cpufreq policy max limit is changed when intel_pstate operates
> in the passive mode with HWP enabled and the "powersave" governor is
> used on top of it, the HWP max limit is not updated as appropriate.
>
> Namely, in the "powersave" governor case, the target P-state
> is always equal to the policy min limit, so if the latter does
> not change, intel_cpufreq_adjust_hwp() is not invoked to update
> the HWP Request MSR due to the "target_pstate != old_pstate" check
> in intel_cpufreq_update_pstate(), so the HWP max limit is not
> updated as a result.
>
> Also, if the CPUFREQ_NEED_UPDATE_LIMITS flag is not set for the
> driver and the target frequency does not change along with the
> policy max limit, the "target_freq == policy->cur" check in
> __cpufreq_driver_target() prevents the driver's ->target() callback
> from being invoked at all, so the HWP max limit is not updated.
>
> To prevent that occurring, set the CPUFREQ_NEED_UPDATE_LIMITS flag
> in the intel_cpufreq driver structure if HWP is enabled and modify
> intel_cpufreq_update_pstate() to do the "target_pstate != old_pstate"
> check only in the non-HWP case and let intel_cpufreq_adjust_hwp()
> always run in the HWP case (it will update HWP Request only if the
> cached value of the register is different from the new one including
> the limits, so if neither the target P-state value nor the max limit
> changes, the register write will still be avoided).
>
> Fixes: f6ebbcf08f37 ("cpufreq: intel_pstate: Implement passive mode
> with HWP enabled")
> Reported-by: Zhang Rui <rui.zhang@intel.com>
> Cc: 5.9+ <stable@vger.kernel.org> # 5.9+
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

I have confirmed that the problem is gone with this patch series
applied.
The HWP register is updated after changing the scaling_max_freq sysfs
attribute, with powersave governor.

Tested-by: Zhang Rui <rui.zhang@intel.com>

thanks,
rui
> ---
>
> The v2 is just the intel_pstate changes (without the core changes)
> and setting
> the new flag.
>
> ---
> drivers/cpufreq/intel_pstate.c | 13 ++++++-------
> 1 file changed, 6 insertions(+), 7 deletions(-)
>
> Index: linux-pm/drivers/cpufreq/intel_pstate.c
> ===================================================================
> --- linux-pm.orig/drivers/cpufreq/intel_pstate.c
> +++ linux-pm/drivers/cpufreq/intel_pstate.c
> @@ -2550,14 +2550,12 @@ static int intel_cpufreq_update_pstate(s
> int old_pstate = cpu->pstate.current_pstate;
>
> target_pstate = intel_pstate_prepare_request(cpu,
> target_pstate);
> - if (target_pstate != old_pstate) {
> + if (hwp_active) {
> + intel_cpufreq_adjust_hwp(cpu, target_pstate,
> fast_switch);
> + cpu->pstate.current_pstate = target_pstate;
> + } else if (target_pstate != old_pstate) {
> + intel_cpufreq_adjust_perf_ctl(cpu, target_pstate,
> fast_switch);
> cpu->pstate.current_pstate = target_pstate;
> - if (hwp_active)
> - intel_cpufreq_adjust_hwp(cpu, target_pstate,
> - fast_switch);
> - else
> - intel_cpufreq_adjust_perf_ctl(cpu,
> target_pstate,
> - fast_switch);
> }
>
> intel_cpufreq_trace(cpu, fast_switch ?
> INTEL_PSTATE_TRACE_FAST_SWITCH :
> @@ -3014,6 +3012,7 @@ static int __init intel_pstate_init(void
> hwp_mode_bdw = id->driver_data;
> intel_pstate.attr = hwp_cpufreq_attrs;
> intel_cpufreq.attr = hwp_cpufreq_attrs;
> + intel_cpufreq.flags |=
> CPUFREQ_NEED_UPDATE_LIMITS;
> if (!default_driver)
> default_driver = &intel_pstate;
>
>
>
>

\
 
 \ /
  Last update: 2020-10-27 09:48    [W:0.140 / U:0.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site