lkml.org 
[lkml]   [2020]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[v2 07/11] arm64: dts: ls208xa: add DT node for external interrupt lines
Date
From: Biwen Li <biwen.li@nxp.com>

Add device-tree node for external interrupt lines IRQ0-IRQ11.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
Change in v2:
- none

.../arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 33 ++++++++++++++++++-
1 file changed, 32 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 41102dacc2e1..f75aa2ce4e2b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -3,7 +3,7 @@
* Device Tree Include file for Freescale Layerscape-2080A family SoC.
*
* Copyright 2016 Freescale Semiconductor, Inc.
- * Copyright 2017 NXP
+ * Copyright 2017-2020 NXP
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
@@ -154,6 +154,37 @@
little-endian;
};

+ isc: syscon@1f70000 {
+ compatible = "fsl,ls2080a-isc", "syscon";
+ reg = <0x0 0x1f70000 0x0 0x10000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1f70000 0x10000>;
+
+ extirq: interrupt-controller@14 {
+ compatible = "fsl,ls2080a-extirq", "fsl,ls1088a-extirq";
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x14 4>;
+ interrupt-map =
+ <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xffffffff 0x0>;
+ };
+ };
+
tmu: tmu@1f80000 {
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f80000 0x0 0x10000>;
--
2.17.1
\
 
 \ /
  Last update: 2020-10-27 05:56    [W:0.170 / U:0.892 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site