lkml.org 
[lkml]   [2020]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 05/11] arm64: dts: ls1088ardb: add necessary DTS nodes for DPMAC2
Date
Annotate the external MDIO2 node and describe the 10GBASER PHY found on
the LS1088ARDB board and add a phy-handle for DPMAC2 to link it.
Also, add the internal PCS MDIO node for the internal MDIO buses found
on the LS1088A SoC along with its internal PCS PHY and link the
corresponding DPMAC to the PCS through the pcs-handle.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
Changes in v2:
- none
Changes in v3:
- none
Changes in v4:
- none

.../boot/dts/freescale/fsl-ls1088a-rdb.dts | 19 +++++++++++++++++++
.../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 13 +++++++++++++
2 files changed, 32 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index d7886b084f7f..661898064f0c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -17,6 +17,12 @@ / {
compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
};

+&dpmac2 {
+ phy-handle = <&mdio2_aquantia_phy>;
+ phy-connection-type = "10gbase-r";
+ pcs-handle = <&pcs2>;
+};
+
&dpmac3 {
phy-handle = <&mdio1_phy5>;
phy-connection-type = "qsgmii";
@@ -109,6 +115,15 @@ mdio1_phy8: emdio1_phy@8 {
};
};

+&emdio2 {
+ status = "okay";
+
+ mdio2_aquantia_phy: emdio2_aquantia@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ };
+};
+
&i2c0 {
status = "okay";

@@ -179,6 +194,10 @@ &esdhc {
status = "okay";
};

+&pcs_mdio2 {
+ status = "okay";
+};
+
&pcs_mdio3 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 9241d32e5513..026f0440d324 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -690,6 +690,19 @@ emdio2: mdio@8b97000 {
status = "disabled";
};

+ pcs_mdio2: mdio@8c0b000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c0b000 0x0 0x1000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ pcs2: pcs-phy@0 {
+ reg = <0>;
+ };
+ };
+
pcs_mdio3: mdio@8c0f000 {
compatible = "fsl,fman-memac-mdio";
reg = <0x0 0x8c0f000 0x0 0x1000>;
--
2.28.0
\
 
 \ /
  Last update: 2020-10-26 17:13    [W:0.118 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site