lkml.org 
[lkml]   [2020]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 04/12] mm/filemap: Add mapping_seek_hole_data
On Mon, Oct 26, 2020 at 11:48:06AM +0100, Jan Kara wrote:
> > +static inline loff_t page_seek_hole_data(struct page *page,
> > + loff_t start, loff_t end, bool seek_data)
> > +{
> > + if (xa_is_value(page) || PageUptodate(page))
>
> Please add a comment here that this is currently tmpfs specific treating
> exceptional entries as swapped out pages and thus data. It took me quite a
> while to figure this out. You can remove the comment later when it is no
> longer true...

But it's not tmpfs specific. If the value entry is a DAX entry, there's
data here, and if the value entry is a shadow entry, there's data here
too. Not that it should be called for either of those cases because the
filesystem should know, but a value entry always means there's data here.

I'm open to adding a comment, but saying "A value entry always means data"
seems a little redundant with the code. What would have helped?

> > + return seek_data ? start : end;
> > + return seek_data ? end : start;
> > +}
> > +
> > +static inline
> > +unsigned int seek_page_size(struct xa_state *xas, struct page *page)
> > +{
> > + if (xa_is_value(page))
> > + return PAGE_SIZE << xa_get_order(xas->xa, xas->xa_index);
> > + return thp_size(page);
> > +}
> > +
> > +/**
> > + * mapping_seek_hole_data - Seek for SEEK_DATA / SEEK_HOLE in the page cache.
> > + * @mapping: Address space to search.
> > + * @start: First byte to consider.
> > + * @end: Limit of search (exclusive).
> > + * @whence: Either SEEK_HOLE or SEEK_DATA.
> > + *
> > + * If the page cache knows which blocks contain holes and which blocks
> > + * contain data, your filesystem can use this function to implement
> > + * SEEK_HOLE and SEEK_DATA. This is useful for filesystems which are
> > + * entirely memory-based such as tmpfs, and filesystems which support
> > + * unwritten extents.
> > + *
> > + * Return: The requested offset on successs, or -ENXIO if @whence specifies
> > + * SEEK_DATA and there is no data after @start. There is an implicit hole
> > + * after @end - 1, so SEEK_HOLE returns @end if all the bytes between @start
> > + * and @end contain data.
> > + */
> > +loff_t mapping_seek_hole_data(struct address_space *mapping, loff_t start,
> > + loff_t end, int whence)
> > +{
> > + XA_STATE(xas, &mapping->i_pages, start >> PAGE_SHIFT);
> > + pgoff_t max = (end - 1) / PAGE_SIZE;
> > + bool seek_data = (whence == SEEK_DATA);
> > + struct page *page;
> > +
> > + if (end <= start)
> > + return -ENXIO;
> > +
> > + rcu_read_lock();
> > + while ((page = xas_find_get_entry(&xas, max, XA_PRESENT))) {
> > + loff_t pos = xas.xa_index * PAGE_SIZE;
> > +
> > + if (start < pos) {
> > + if (!seek_data)
> > + goto unlock;
> > + start = pos;
> > + }
> > +
> > + pos += seek_page_size(&xas, page);
> > + start = page_seek_hole_data(page, start, pos, seek_data);
> > + if (start < pos)
> > + goto unlock;
>
> Uh, I was staring at this function for half an hour but I still couldn't
> convince myself that it is correct in all the corner cases. Maybe I'm dumb
> but I'd wish this was more intuitive (and I have to say that the original
> tmpfs function is much more obviously correct to me). It would more
> understandable for me if we had a code like:
>
> if (page_seek_match(page, seek_data))
> goto unlock;
>
> which would be just the condition in page_seek_hole_data(). Honestly at the
> moment I fail to see why you bother with 'pos' in the above four lines at
> all.

So this?

static bool page_seek_match(struct page *page, bool seek_data)
{
/* Swap, shadow & DAX entries all represent data */
if (xa_is_value(page) || PageUptodate(page))
return seek_data;
return !seek_data;
}

...

if (page_seek_match(page, seek_data))
goto unlock;
start = pos + seek_page_size(&xas, page);

The function makes more sense when page_seek_hole_data() gains the
ability to look at sub-page uptodate status and it needs to return
where in the page the data (or hole) starts. But that can be delayed
for the later patch.

With those changes,

Ran: generic/285 generic/286 generic/436 generic/445 generic/448 generic/490 generic/539
Passed all 7 tests

> BTW I suspect that this loop forgets to release the page reference it has got
> when doing SEEK_HOLE.

You're right. I need a put_page() at the end of the loop. Also true
for the case where we find a !Uptodate page when doing SEEK_DATA.

> > + }
> > + rcu_read_unlock();
> > +
> > + if (seek_data)
> > + return -ENXIO;
> > + goto out;
> > +
> > +unlock:
> > + rcu_read_unlock();
> > + if (!xa_is_value(page))
> > + put_page(page);
> > +out:
> > + if (start > end)
> > + return end;
> > + return start;
> > +}
>
>
> Honza
>
> --
> Jan Kara <jack@suse.com>
> SUSE Labs, CR

\
 
 \ /
  Last update: 2020-10-26 13:18    [W:2.656 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site