lkml.org 
[lkml]   [2020]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 2/2] PCI: dwc: Add support to configure for ECRC
Date
On 10/25/20, 3:31 AM, Vidya Sagar wrote:
>
> DesignWare core has a TLP digest (TD) override bit in one of the control
> registers of ATU. This bit also needs to be programmed for proper ECRC
> functionality. This is currently identified as an issue with DesignWare
> IP version 4.90a. This patch does the required programming in ATU upon
> querying the system policy for ECRC.
>
> Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
> ---
> drivers/pci/controller/dwc/pcie-designware.c | 8 ++++++--
> drivers/pci/controller/dwc/pcie-designware.h | 2 ++
> 2 files changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> index b5e438b70cd5..810dcbdbe869 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.c
> +++ b/drivers/pci/controller/dwc/pcie-designware.c
> @@ -245,7 +245,7 @@ static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, u8 func_no,
> lower_32_bits(pci_addr));
> dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
> upper_32_bits(pci_addr));
> - val = type | PCIE_ATU_FUNC_NUM(func_no);
> + val = type | PCIE_ATU_FUNC_NUM(func_no) | pci->td << PCIE_ATU_TD_SHIFT;
> val = upper_32_bits(size - 1) ?
> val | PCIE_ATU_INCREASE_REGION_SIZE : val;
> dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, val);
> @@ -295,7 +295,8 @@ static void __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no,
> dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
> upper_32_bits(pci_addr));
> dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type |
> - PCIE_ATU_FUNC_NUM(func_no));
> + PCIE_ATU_FUNC_NUM(func_no) |
> + pci->td << PCIE_ATU_TD_SHIFT);
> dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE);
>
> /*
> @@ -565,6 +566,9 @@ void dw_pcie_setup(struct dw_pcie *pci)
> dev_dbg(pci->dev, "iATU unroll: %s\n", pci->iatu_unroll_enabled ?
> "enabled" : "disabled");
>
> + if (pci->version == 0x490A)
> + pci->td = pcie_is_ecrc_enabled();
> +
> if (pci->link_gen > 0)
> dw_pcie_link_set_max_speed(pci, pci->link_gen);
>
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> index 21dd06831b50..d34723e42e79 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -90,6 +90,7 @@
> #define PCIE_ATU_TYPE_IO 0x2
> #define PCIE_ATU_TYPE_CFG0 0x4
> #define PCIE_ATU_TYPE_CFG1 0x5
> +#define PCIE_ATU_TD_SHIFT 8
> #define PCIE_ATU_FUNC_NUM(pf) ((pf) << 20)
> #define PCIE_ATU_CR2 0x908
> #define PCIE_ATU_ENABLE BIT(31)
> @@ -276,6 +277,7 @@ struct dw_pcie {
> int num_lanes;
> int link_gen;
> u8 n_fts[2];
> + bool td; /* TLP Digest (for ECRC purpose) */

If possible, don't add a new variable to 'dw_pcie' structure.
Please find a way to set TD bit without adding a new variable to 'dw_pcie' structure'.

Best regards,
Jingoo Han

> };
>
> #define to_dw_pcie_from_pp(port) container_of((port), struct dw_pcie, pp)
> --
> 2.17.1

\
 
 \ /
  Last update: 2020-10-25 21:50    [W:0.048 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site