lkml.org 
[lkml]   [2020]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 5/7] arm64: mm: Set ZONE_DMA size based on devicetree's dma-ranges
On Fri, Oct 23, 2020 at 05:27:49PM +0200, Nicolas Saenz Julienne wrote:
> On Thu, 2020-10-22 at 19:06 +0100, Catalin Marinas wrote:
> > On Wed, Oct 21, 2020 at 02:34:35PM +0200, Nicolas Saenz Julienne wrote:
> > > @@ -188,9 +186,11 @@ static phys_addr_t __init max_zone_phys(unsigned int zone_bits)
> > > static void __init zone_sizes_init(unsigned long min, unsigned long max)
> > > {
> > > unsigned long max_zone_pfns[MAX_NR_ZONES] = {0};
> > > + unsigned int __maybe_unused dt_zone_dma_bits;
> > >
> > > #ifdef CONFIG_ZONE_DMA
> > > - zone_dma_bits = ARM64_ZONE_DMA_BITS;
> > > + dt_zone_dma_bits = ilog2(of_dma_get_max_cpu_address(NULL));
> > > + zone_dma_bits = min(32U, dt_zone_dma_bits);
> >
> > A thought: can we remove the min here and expand ZONE_DMA to whatever
> > dt_zone_dma_bits says? More on this below.
>
> On most platforms we'd get PHYS_ADDR_MAX, or something bigger than the actual
> amount of RAM. Which would ultimately create a system wide ZONE_DMA. At first
> sight, I don't see it breaking dma-direct in any way.
>
> On the other hand, there is a big amount of MMIO devices out there that can
> only handle 32-bit addressing. Be it PCI cards or actual IP cores. To make
> things worse, this limitation is often expressed in the driver, not FW (with
> dma_set_mask() and friends). If those devices aren't behind an IOMMU we have be
> able to provide at least 32-bit addressable memory. See this comment from
> dma_direct_supported():
>
> /*
> * Because 32-bit DMA masks are so common we expect every architecture
> * to be able to satisfy them - either by not supporting more physical
> * memory, or by providing a ZONE_DMA32. If neither is the case, the
> * architecture needs to use an IOMMU instead of the direct mapping.
> */
>
> I think, for the common case, we're stuck with at least one zone spanning the
> 32-bit address space.

You are right, I guess it makes sense to keep a 32-bit zone as not all
devices would be described as such.

> > > arm64_dma_phys_limit = max_zone_phys(zone_dma_bits);
> > > max_zone_pfns[ZONE_DMA] = PFN_DOWN(arm64_dma_phys_limit);
> > > #endif
> >
> > I was talking earlier to Ard and Robin on the ZONE_DMA32 history and the
> > need for max_zone_phys(). This was rather theoretical, the Seattle
> > platform has all RAM starting above 4GB and that led to an empty
> > ZONE_DMA32 originally. The max_zone_phys() hack was meant to lift
> > ZONE_DMA32 into the bottom of the RAM, on the assumption that such
> > 32-bit devices would have a DMA offset hardwired. We are not aware of
> > any such case on arm64 systems and even on Seattle, IIUC 32-bit devices
> > only work if they are behind an SMMU (so no hardwired offset).
> >
> > In hindsight, it would have made more sense on platforms with RAM above
> > 4GB to expand ZONE_DMA32 to cover the whole memory (so empty
> > ZONE_NORMAL). Something like:
> >
> > diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
> > index a53c1e0fb017..7d5e3dd85617 100644
> > --- a/arch/arm64/mm/init.c
> > +++ b/arch/arm64/mm/init.c
> > @@ -187,8 +187,12 @@ static void __init reserve_elfcorehdr(void)
> > */
> > static phys_addr_t __init max_zone_phys(unsigned int zone_bits)
> > {
> > - phys_addr_t offset = memblock_start_of_DRAM() & GENMASK_ULL(63, zone_bits);
> > - return min(offset + (1ULL << zone_bits), memblock_end_of_DRAM());
> > + phys_addr_t zone_mask = 1ULL << zone_bits;
> > +
> > + if (!(memblock_start_of_DRAM() & zone_mask))
> > + zone_mask = PHYS_ADDR_MAX;
> > +
> > + return min(zone_mask, memblock_end_of_DRAM());
> > }
> >
> > static void __init zone_sizes_init(unsigned long min, unsigned long max)
> >
> > I don't think this makes any difference for ZONE_DMA unless a
> > broken DT or IORT reports the max CPU address below the start of DRAM.
> >
> > There's a minor issue if of_dma_get_max_cpu_address() matches
> > memblock_end_of_DRAM() but they are not a power of 2. We'd be left with
> > a bit of RAM at the end in ZONE_NORMAL due to ilog2 truncation.
>
> I agree it makes no sense to create more than one zone when the beginning of
> RAM is located above the 32-bit address space. I'm all for disregarding the
> possibility of hardwired offsets. As a bonus, as we already discussed some time
> ago, this is something that never played well with current dma-direct code[1].
>
> [1] https://lkml.org/lkml/2020/9/8/377

Maybe this one is still worth fixing, at least for consistency. But it's
not urgent.

My diff above has a side-effect that if dt_zone_dma_bits is below the
start of DRAM, ZONE_DMA gets expanded to PHYS_ADDR_MAX. If this was
32-bit, that's fine but if it was, say, 30-bit because of some firmware
misdescription with RAM starting at 2GB, we end up with no ZONE_DMA32. I
think max_zone_phys() could cap this at 32, as a safety mechanism:

static phys_addr_t __init max_zone_phys(unsigned int zone_bits)
{
phys_addr_t zone_mask = (1ULL << zone_bits) - 1;
phys_addr_t phys_start = memblock_start_of_DRAM();

if (!(phys_start & U32_MAX))
zone_mask = PHYS_ADDR_MAX;
else if (!(phys_start & zone_mask))
zone_mask = U32_MAX;

return min(zone_mask + 1, memblock_end_of_DRAM());
}

Assuming I got the shifting right, arm64_dma_phys_limit becomes:

arm64_dma_phys_limit = max_zone_phys(zone_dma_bits, 32);

--
Catalin

\
 
 \ /
  Last update: 2020-10-23 19:38    [W:0.044 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site